DOI QR코드

DOI QR Code

The method to reduce the travel time of the gentry in (sLb-Camera-pRc) type

(sLb-Camera-pRc)타입의 겐트리 이동시간 단축 방법

  • Received : 2019.07.30
  • Accepted : 2019.09.20
  • Published : 2019.09.28

Abstract

Gentry, an SMT equipment, is a device that absorbs electronic components from the feeder and mounts them correctly on the PCB. At this time, the gantry stops in front of the camera to check whether the parts are correctly adsorbed. In this paper, we propose a method to shorten the moving time by moving the gantry without stopping in front of the camera. This method shows that the moving time is shorter than that of the conventional method by finding a path that can be moved in the fastest time among the various moving paths. The proposed method (moving-motion) reduces the gantry travel time by 20% compared to the conventional method (stop-motion).

SMT장비 인 겐트리는 전자 부품을 피더에서 흡착하여 기판위에 정확히 실장하는 장비이다. 이 때 부품이 정확히 흡착되었는지를 검사하기 위해 카메라 앞에서 겐트리는 잠시 멈춘다. 본 논문에서는 이동 시간을 단축하기 위해 카메라 앞에서 겐트리가 정지하지 않고 움직이면서 검사를 할 수 있는 방법을 제시한다. 이 방법은 여러 이동 경로 중 가장 빠른 시간에 이동할 수 있는 경로를 찾아 기존 방법보다 이동 시간이 단축됨을 보여준다. 제시된 방법(moving-motion)은 기존 방법(stop-motion)보다 겐트리의 이동 시간을 20%나 단축시킨다.

Keywords

References

  1. J. S. Lee. (2016). Defect Classification of Components for SMT Inspection Machines. Masters thesis. Chungbuk National University, Chungbuk
  2. C. H. Lee. (2015). Integrated path planning algorithm for SMT inspection machines considering inspection delay time. Masters thesis. Chungbuk National University, Chungbuk.
  3. K. S. Han. (2014). Enhanced uniformity of Chip Mounter by Force control. Masters thesis. AJu University, Geonggi.
  4. H. Y. Kim. (2008). Failure Mode and Effect Analysis (FMEA) for Manhattan defect of Flexible Printed Circuit Board in Surface Mount Technology. Masters thesis. Myungji University, Geonggi.
  5. N. Y. Cho, C. R. Kim, M R Kim. (2017). Factors Influencing the Efforts for Embedded Softer Maintenance: A Case from Semiconductor Wafer Processing Line. Journal of Digital Convergence. 15(9), 211-221. DOI: 10.14400/JDC.2017.15.9.211
  6. D. Beyer, M. Dangl. & P. Wendler. (2018). A Unifying View on SMT-Based Software Verification. Journal of automated reasoning, 60(3), 299-305. https://doi.org/10.1007/s10817-017-9432-6
  7. T. Merkle & R. Gotzen. (2015). Millimeter-Wave Surface Mount Technology for 3-D Printed Polymer Multichip Modules. IEEE Transactions on Components, Packaging and Manufacturing Technology, 5(2), 201-206. https://doi.org/10.1109/TCPMT.2014.2387232
  8. F. Brandl, F. Brandt, C. Eberl & C. Geist, (2018). Proving the Incompatibility of Efficiency and Strategyproofness via SMT Solving Journal of the Association for Computing Machinery, 65(2), 188-195.
  9. Y. S. Jeong, Y. T. Kim, G, C, Parkl. (2019). Designing an Automated Production Information Platform for Small and Medium-sized Businesses. Journal of Convergence for Information Technology, 9(1), 116-122. DOI: 10.22156/CS4SMB. 2019.9.1.116.
  10. S. H. Kim & C. S. Kim. (2017). The method of minimizing gantry driving time in surface mount. Cheonan: Kongju National University.
  11. S. H. Kim & C. S. Kim. (2018) The Method to reduce the driving time in (sLa-Camera-pRd)type, Journal of The Korea Convergence Society, 9(12), 1-7. DOI Number: 10.15207/JKCS.2018.9.12.001
  12. S. H. Kim & C. S. Kim. (2018) Comparing the placement time of Stop-motion and moving-motion Indian Journal of Public Health Research & Development, 9(8), 633-637. DOI Number:10.5958/0976-5506.2018.00804.5
  13. S. H. Kim & C. S. Kim. (2017) A Confirmation of the minimum moving time to the stop-motion in the (sLa-Camera-pLa)type. KIPS Tr. Software and Data Eng. 6(5), 223-228. DOI Number: 10.3745/KTSDE.2017.6.5.223
  14. S. H. Kim & C. S. Kim. (2017) A Comparison of the moving time about gantry. KIPS Tr. Software and Data Eng. 6(3), 135-140. DOI Number: 10.3745/KTSDE.2017.6.3.135
  15. S. H. Kim & C. S. Kim. (2015) The most Efficient Path Algorithm from Feeders to PCBs. International Journal of Control and Automation, 8(9), 11-20. DOI : 10.14257/ijca.2015.8.9.02
  16. S. H. Kim & C. S. Kim. (2019) The method to reduce the travel time of the gentry in (sLb-Camera-pLb) type, Journal of the Korea Convergence Society, 10(4), 39-43. DOI Number:10.15207/JKCS.2019.10.4.039