• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.178-179
• /
• 2010

This paper presents a simulation model and analysis of grid-tied wind turbine generator with batteries using the PSCAD/EMTDC software. The modeled system is consist of two inverters and one bidirectional DC/DC converter. These inverter are to capture the maximum active power under varying wind conditions and to keep the DC-Link voltage magnitude at a specific level. And the bidirectional DC/DC converter makes battery charging or discharging depend on power gap between wind turbine output and local load. Aerodynamic models are applied for a wind turbine blade simulator.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.625-630
• /
• 2005

In this paper, several energy recovery circuits (ERC) for the plasma display panel (PDP) are reviewed and classified in a manner of operation characteristics. A typical ERC using the Regenerative Transformer (RT) is introduced and compared with conventional ones. RT-ERC can achieve zero-voltage-switching (ZVS) for main full-bridge switches and zero-current-switching (ZCS) for the resonant switches and diodes. The charging/discharging energy of panel capacitance is efficiently recovered with the RT and without a sub-circuit. The presented circuit is verified with simulation and experimental results.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.159-161
• /
• 2018

지난 수년 간 다량으로 배출되고 있는 폐 배터리를 에너지 저장장치(ESS)로서 재활용하고자 하는 연구가 활발히 진행되고 있다. 이러한 ESS 시스템에는 사용하는 배터리마다의 규격이나 이전 사용 시 수명, 배출 시 상태의 차이가 존재하기 때문에 각 배터리 간 셀밸런싱 시스템이 필수로 요구된다. 현재까지 직렬형, 병렬형 등이 연구되고 있지만 모듈화나 신뢰성 등을 만족 시키기 위해서는 병렬형이 유리하다. 본 논문에서는 양방향 리니어 레귤레이터를 사용하며 셀 벨런싱 회로가 없는 병렬형 충방전 시스템을 제안하고자 한다.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.10a
• /
• pp.45-48
• /
• 2003

Ramp-rate limitation is a serious obstacle for successful operation of fast charging and discharging magnet Ramp-rate limitation is hard to expect or fully investigate due to its electric and thermo-hydraulics couplings. In this paper, the simplest case of ramp-rate limitation is investigated with two-strand superconducting cable model considering transient heat transfer The simulation results are compared with the experimental results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.102-105
• /
• 1997

The thickness dependence of stress voltage oxide currents has been measured in oxides with thicknesses between 10nm and 80nm. The oxide currents were shown to be composed of stress current and transient current. The stress current was caused by trap assited tunneling through the oxide. The transient current was caused by the tunneling charging and discharging of the trap in the interfaces. The stress current was used to estimate to the limitations on oxide thicknesses. The transient current was used to the data retention in memory devices.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.108-109
• /
• 2017

전기자동차 보급 확대로 인해 2018년부터 전 세계적으로 폐배터리가 다량으로 배출될 것으로 예상되어 폐 배터리를 에너지저장장치(ESS)로 재활용하는 방안이 연구되고 있다. 하지만 배터리간 규격이나 수명, 상태의 차이가 존재하기 때문에 셀밸런싱 시스템이 필수로 요구된다. 기존에는 이러한 시스템으로 직렬형 시스템을 채용하고 있지만 모듈화나 신뢰성 등 시스템이 요구하는 조건을 만족시키기 어렵다. 이에 따라 본 논문에서는 기존 시스템과 차별화 된 분산 충 방전 병렬 시스템을 제안하고 그에 사용되는 전력조절기를 소개하고자 한다.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.118-119
• /
• 2017

This paper proposes the operation mode and control method of the PV ESS for building lighting. The PV ESS is consisted of 3.3kW single phase grid connected PV inverter, Bi-direction DC/DC converter for Charging/Discharging for battery and DC48V Buck DC/DC converter for LED lighting.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.317-318
• /
• 2014

This paper is proposed dual full-bridge converter to drive flow battery used battery energy storage system. The system which is proposed has additional legs at each leg to perform stripping algorithm which is necessary to drive flow battery system. The proposed system is verified by simulation.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.36-37
• /
• 2010

This paper presents a simulation model and results of experiment about analysis of grid-tied wind turbine generator with batteries. The system consists of two inverters and a bidirectional DC/DC converter. These inverters are to capture the maximum active power under varying wind conditions and to keep the DC-link voltage magnitude at a specific level. And the bidirectional DC/DC converter makes battery charging or discharging depend on power gap between wind turbine output and local load.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.133-135
• /
• 2019

최근 신재생 에너지를 이용한 발전 방법에 관한 활발한 연구가 진행되고 있다. 이로 인해 배터리 충, 방전 분야에서 양방향 DC-DC 컨버터의 수요가 증가 되고 있다. 본 논문에서는 배터리 충, 방전용 양방향 DC-DC 컨버터에 관한 연구로 Interleaved 기법을 적용하여 충전 시 배터리 전압 리플 감소 및 Coupled 인덕터를 적용해 인덕터 전류 리플 감소를 하고 배터리에서 방전 시 출력 전력 증가 및 출력 리플을 감소시키는 연구를 진행하였다. 제안된 컨버터의 특성 및 성능은 시뮬레이션을 통하여 타당성을 검증하였다.