• Environmental Engineering Research
• /
• v.15 no.2
• /
• pp.71-78
• /
• 2010

To understand the effects of acclimation schemes on the formation of anode biofilms, different electrical performances are characterized in this study, with the roles of suspended and attached bacteria in single-chamber microbial fuel cells (MFCs). The results show that the generation of current in single-chamber MFCs is significantly affected by the development of a biofilm matrix on the anode surface containing abundant immobilized microorganisms. The long-term operation with suspended microorganisms was demonstrated to form a dense biofilm matrix that was able to reduce the activation loss in MFCs. Also, a Pt-coated anode was not favorable for the initial or long-term bacterial attachment due to its high hydrophobicity (contact angle = $124^{\circ}$), which promotes easy detachment of the biofilm from the anode surface. Maximum power ($655.0\;mW/m^2$) was obtained at a current density of $3,358.8\;mA/m^2$ in the MFCs with longer acclimation periods. It was found that a dense biofilm was able to enhance the charge transfer rates due to the complex development of a biofilm matrix anchoring the electrochemically active microorganisms together on the anode surface. Among the major components of the extracellular polymeric substance, carbohydrates ($85.7\;mg/m^2_{anode}$) and proteins ($81.0\;mg/m^2_{anode}$) in the dense anode biofilm accounted for 17 and 19%, respectively, which are greater than those in the sparse anode biofilm.

• Journal of the Korean Chemical Society
• /
• v.39 no.5
• /
• pp.350-355
• /
• 1995

UV spectrophotometric investigation has been carried out on the system of charge-transfer (CT) complex with iodine and tetramethyltin in carbon tetrachloride solvent. The transient CT absorption spectrum can be observed in ${\lambda}_{max}=270nm$ and the subsequent disappearance of CT absorption spectrum was accompained by the cleavage of tetramethyltin with iodine (iododestannylation). From there, the rate constants for the iododestannylation were determined at 10, 20 and $35^{\circ}C$ up to 1200 bar and the reaction rates were increased with increasing temperature and pressure. From these rate constants, the values of the activation parameters (${\Delta}V^{\neq},\;{\Delta}{\beta}^{\neq},\;{\Delta}H^{\neq}\;and\;{\Delta}S^{\neq}$) were obtained and from these values discussed in terms of solvent structure variation of transition state and mechanism. From these results, it was found that the reaction is followed with $S_F2$ mechanism and weakened $S_F2$ mechanism nature by increasing pressure.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.519-523
• /
• 2018

Cyclodextrins are a class of oligosaccharides having an extremely low toxicity, so that they have been used for the formation of host-guest complexes and removal of toxic gases or molecules. In this study, the subtle phenomenon associated with the formation of host-guest complexes between cyclodextrin and toxic molecules (methyl paraben) was experimentally investigated. First, the formation of cyclodextrin-methyl paraben complexes was monitored by UV/Vis spectroscopy as a function of the cyclodextrin concentration. Secondly, the electrochemical measurement was performed with the surface engineered Au electrode having cyclodextrin molecules on the Au substrate. The sensing signal derived from the addition of methyl paraben solution into the Au surface was measured delicately. This study can be informative for future applications such as sensors.

• Membrane Journal
• /
• v.29 no.6
• /
• pp.299-307
• /
• 2019

Photocatalysis is an environment friendly technique for degrading organic dyes in water. Tungsten oxide is becoming an active area of research in photocatalysis nanomaterials for having a smaller bandgap than the previously favored titanium dioxide. Synthesis of hierarchical structures, doping platinum (Pt), coupling with nanocomposites or other semiconductors are investigated as valid methods of improving the photocatalytic degradation efficiency. These impact the reaction by creating a redshift in the wavelength of light used, effecting charge transfer, and the formation/recombination of electron-hole pairs. Each of the methods mentioned above are investigated in terms of synthesis and photocatalytic efficiency, with the simplest being modification on the morphology of tungsten oxide, since it does not need synthesis of other materials, and the most efficient in photocatalytic degradation being complex coupling of metal oxides and carbon composites. The photocatalysis technology can be incorporated with water purification membrane by modularization process and applied to advanced water treatment system.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.599-603
• /
• 2008

The complexes Pd(nbmtp)Cl2 and Pt(nbmtp)Cl2 (nbmptp = 1-nonyl-3,4-bis(methylthio)pyrrole) were prepared and their x-ray structures were determined at room temperature. The four-coordinated metal unit and the pyrrole ring formed a nearly planar geometry. The free ligand dissolved in CH2Cl2 produced two luminescence bands associated with the lone-pair electron of S (l max = 525 nm) and the pyrrole p electron (l max = 388 nm). When the two complexes were dissolved in CH2Cl2, these two luminescence bands were also observed, although the low-energy band was blueshifted. For the crystalline Pt(II) complex, only the strong charge transfer band (l max = 618 nm) from the d* orbital of Pt resulted from excitation of the lone-pair electron of S.

• Journal of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.287-293
• /
• 1983

Free radical-initiated copolymerizations of diethyl ${\alpha}$-phenylvinyl phospbate (DEPVP) with acrylonitrile (AN) and maleic anhydride (MAnh) were studied. The monomer reactivity ratios for AN/DEPVP pair, determined at $70^{\circ}C$ in bulk using benzoyl peroxide as an initiator, were;$ r_1(AN) = 0.77, r_2(DEPVP) = 0.002$. The values of the Alfrey-Price constants, Q and e, for DEPVP were calculated to be 0.012 and -1.35, respectively. Free radical-initiated copolymerization of MAnh/DEPVP pair in chloroform at $70^{\circ}C$ produced 1 : 1 alternating copolymers regardless monomer feed composition with the highest copolymerization rate at the molar ratio of MAnh : DEPVP = 7 : 3. The equilibrium constant of a charge-transfer complex between DEPVP and MAnh in deutrated chloroform, determinated at room temperature by transformed Benesi-Hildebrand NMR method, was 0.085 l/mol. The reduced viscosity of copolymers of AN/DEPVP pair decreased as the content of DEPVP units increased, while that of MAnh/DEPVP pair remained more or less constant.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.3
• /
• pp.365-372
• /
• 2004

Two simple, rapid and sensitive spectrophotometric methods for the determination of three fluoroquinolones, namely levofloxacin, norfloxacin and ciprofloxacin have been performed either in pure form or in their tablets. In the first method, levofloxacin and norfloxacin are directly treated with bromocresol green (BCG) in dichloromethane while ciprofloxacin is allowed to react with the same dye in aqueous acidic buffer. Highly yellow colored complex species were formed instantaneously in case of levofloxacin and norfloxacin or after extraction into dichloromethane for ciprofloxacin. The formed complexes are quantified spectrophotometrically at their absorption maxima at 411 nm for levofloxacin and 412 nm for norfloxacin and ciprofloxacin. The second method involves the reaction of levofloxacin with ${\rho}$-chloranilic acid ( ${\rho}$-CA) and norfloxacin with tetracyanoethylene (TCNE) in acetonitrile to give complexes with maximum absorbance at 521 and 333 nm for the two drugs, respectively. Adopting the first procedure, calibration graphs were linear over the range 1- 20 ${\mu}g\;mL^{-1}$ with mean percentage recoveries of 100.41 ${\pm}$ 0.72, 99.99 ${\pm}$ 0.54 and 100.23 ${\pm}$ 0.91 for the theree drugs, respectively. For the second procedure, the concentration ranges were 15-250 ${\mu}g\;mL^{-1}$ for levofloxacin using ${\rho}$-CA and 0.8-16 ${\mu}g\;mL^{-1}$ for norfloxacin using TCNE with mean percentage recoveries of 99.88 ${\pm}$ 0.45 and 100.26 ${\pm}$ 0.68 for the two drugs, respectively. The proposed methods were successfully applied to determine these drugs in their tablet formulations and the results compared favorably to that of reference methods. The proposed methods are recommended for quality control and routine analysis.

• Journal of the Korean Chemical Society
• /
• v.37 no.3
• /
• pp.287-293
• /
• 1993

Ultraviolet spectrophotometric investigation has been carried out on the system of charge-transfer(CT) complex with iodine and tetramethyltin in n-hexane and acetone. From these results, the transient CT absorption spectrum can be observed and the subsequent disappearance of CT absorption spectrum is accompained by the cleavage of tetramethyltin with iodine (iododestannylation). Therefore, the rate constants for the iododestannylation were determined at 10, 25 and 35$^{\circ}C$ up to 1600 bar and the rates of reaction were increased with increasing temperature and pressure. From these rate constants, the values of the activation parameters (${\Delta}V^{\neq}$, ${\Delta}{\beta}^{\neq}$, ${\Delta}H^{\neq}$ and ${\Delta}S^{\neq}$) were obtained and discussed in terms of solvent structure variation of transition state and mechanism from these values. It could postulated that the reaction is followed with S$_F$2 mechanism and weakened S$_F$2 mechanism nature by increasing pressure.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.5
• /
• pp.279-289
• /
• 2008

This study has the primary purpose to understanding the present situation through research on the actual condition about human resource outsourcing in the stocks and KOSDAQ enterprises, and would give the basic and useful data to develop human resource outsourcing. Data were collected from 1,500 charge of human resource management in the stocks and KOSDAQ enterprises which introduced or will be introduced human resource outsourcing. Frequencies, cross-tabs and independent-samples t-test were used to understanding the actual condition. Research findings are summarized as follows. First, as the introduction area of human resource outsourcing following training and development on the list were personnel information system, recruitment and selection. Second, tasks that transfer outsourcing supply firms owing to human resource outsourcing were common and typical operation function than complex and specific planning function.

• Korean Journal of Materials Research
• /
• v.34 no.4
• /
• pp.202-207
• /
• 2024

In this study, we undertook detailed experiments to increase hydrogen production efficiency by optimizing the thickness of titanium dioxide (TiO₂) thin films. TiO₂ films were deposited on p-type silicon (Si) wafers using atomic layer deposition (ALD) technology. The main goal was to identify the optimal thickness of TiO₂ film that would maximize hydrogen production efficiency while maintaining stable operating conditions. The photoelectrochemical (PEC) properties of the TiO₂ films of different thicknesses were evaluated using open circuit potential (OCP) and linear sweep voltammetry (LSV) analysis. These techniques play a pivotal role in evaluating the electrochemical behavior and photoactivity of semiconductor materials in PEC systems. Our results showed photovoltage tended to improve with increasing thickness of TiO₂ deposition. However, this improvement was observed to plateau and eventually decline when the thickness exceeded 1.5 nm, showing a correlation between charge transfer efficiency and tunneling. On the other hand, LSV analysis showed bare Si had the greatest efficiency, and that the deposition of TiO₂ caused a positive change in the formation of photovoltage, but was not optimal. We show that oxide tunneling-capable TiO₂ film thicknesses of 1~2 nm have the potential to improve the efficiency of PEC hydrogen production systems. This study not only reveals the complex relationship between film thickness and PEC performance, but also enabled greater efficiency and set a benchmark for future research aimed at developing sustainable hydrogen production technologies.