• 한국세라믹학회지
• /
• 제55권2호
• /
• pp.153-159
• /
• 2018

Porous ceramic plates were prepared from Onggi clay and bamboo charcoal powder at 1100 and $1200^{\circ}C$ and their porous properties and water absorption, and the cooling effect of porous plates, were investigated to produce eco-friendly porous ceramics for a self-cooling system that relies on the evaporation of absorbed water. Porous properties were dependent on the particle size of charcoal powder pore forming additive and the firing temperature; properties were also found to be dependent on the total pore volume, average pore size and porosity, which had values of $0.103-0.243cm^3/g$, 0.81 - 2.56 mm and 20.9 - 38.2%, respectively, at $1100^{\circ}C$ and $0.04-0.18cm^3/g$, 0.33 - 2.03 mm and 10.8 - 30.9%, respectively, at $1200^{\circ}C$. Cooling temperature difference of flowing air parallel to surface of porous ceramic plates fired with two kinds of charcoal powder at $1100^{\circ}C$ was $3.5-3.6^{\circ}C$ at $26^{\circ}C$ and 60% of relative humidity in a closed box. Cooling temperature difference was dependent on the number of porous plates and the distance between porous plates. A simple and eco-friendly cooling system using porous ceramic plates fired from Onggi clay and charcoal powder was proposed.

• Progress in Superconductivity
• /
• 제9권1호
• /
• pp.80-84
• /
• 2007

Charcoal was used as a carbon source for improving the critical current density of $MgB_2$ and the effect of annealing temperature on the $J_c$ of $MgB_2$ was investigated. The charcoal powder used in this study was $1{\sim}2$ microns in size and was prepared by wet attrition milling. $MgB_2$ bulk samples with a nominal composition of $Mg(B_{0.95}C_{0.05})_2$ were prepared by in situ process of Mg and B powders. The powder mixture was uniaxially compacted into pellets and heat treated at temperatures of $650^{\circ}C\;-\;1000^{\circ}C$ for 30 minutes in flowing Ar gas. It was found that superconducting transition temperature of $Mg(B_{0.95}C_{0.05})_2$ decreased by charcoal additions which indicates the carbon substitution for boron site. $J_c$ of $Mg(B_{0.95}C_{0.05})_2$ was lower than that of the undoped $MgB_2$ at the magnetic fields smaller than 4 Tesla, while it was higher than that of the undoped sample especially at the magnetic field higher than 4 T. High temperature annealing seems to be effective in increasing $J_c$ due to the enhanced carbon diffusion into boron sites.

• Journal of Gastric Cancer
• /
• 제6권4호
• /
• pp.291-294
• /
• 2006

F-18 FDG-PET/CT는 위암의 재발여부를 평가하는데 있어서 이용될 수 있으나 위양성을 일으키는 경우가 종종 보고된다. 저자들은 위암으로 위절제술과 Mitomycin C를 이용한 복강 내 화학요법 시행 후 F-18 FDG-PET/CT상 위양성의 복강 내 활성화 탄소 육아종을 경험하였다. 46세 남자환자는 수술 후 6개월째 시행한 CT상 우측 대장 뒤에서 종물이 발견되었으나 크기 변화 없다가 36개월째 크기의 증가를 보여 시행한 F-18 FDG-PET/CT상 전이 종양이 의심되었다. 진단적 개복술을 시행하여 제거한 종양은 조직학적 검사상 활성화 탄소 육아종으로 진단되었다. 이처럼 복강 내 화학요법을 시행한 환자의 F-18 FDG-PET/CT의 해석에 있어서 활성화 탄소 육아종에 의한 위양성 소견의 가능성을 염두에 두어야 할 것이다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제29권2호
• /
• pp.53-56
• /
• 2006

실내 라돈 오염량을 줄이기 위한 방법을 2005년 7월부터 2005년 12월까지 6개월간 연구한 결과 가장 쉽고 효과적인 방법은 방의 창문을 자주 열어서 실내공기를 외부로 배출시키는 즉, 환기를 이용하는 것이라는 것을 알 수 있었다. 또 활성탄이 공기 중의 라돈에 대해서도 흡수가 가능하다는 사실이 증명되었기 때문에 창문을 열 수 없는 경우에는 실내에 활성탄을 비치함으로서 실내의 라돈 오염량을 상당히 감소시킬 수 있다는 결론을 얻었으나 방의 크기에 따라 비치해야하는 활성탄의 양이 어느 정도가 가장 효과적인가는 앞으로 더욱 더 연구가 필요한 것으로 사료된다.

• 펄프종이기술
• /
• 제40권4호
• /
• pp.74-81
• /
• 2008

The writing brush, ink stick, paper, and ink stone were the four precious things of the studying and recording in oriental world until even nowaday. The oriental paper was comparatively well evaluated in many papers and reviews, but it is difficult to find some scientific reports or reviews about the ink stick. In this paper, the scientific aspect of ink sticks of oriental maine three country(Korea, China, Japan) were evaluated by the physical, chemical and microscopic analysis. The result could summarized as fellows; 1. The Korean lampblack ink stick contains more carbon and less nitrogen and the Chinese ink sticks contain less carbon and more oxygen. 2. The Korean lampblack and cowhide glue contain relatively higher amount of sulphur. 3. The particle size distribution of carbon in the ink stick was not change after grinding in the ink stone. 4. The particle size of carbon and the pore size in the charcoal ink sticks of three country were larger than those of the lampblack ink sticks. 5. The ink solution of the charcoal ink sticks shows high roundness on Hanji while the ink solution of the lampblack ink sticks is spread readily to Hanji surface. 6. The change of whiteness in printing of the ink sticks is notable in thermal treatment.

• 청정기술
• /
• 제26권2호
• /
• pp.131-136
• /
• 2020

기존의 석유계부산물 기반 음극재의 대체물질을 개발하고자, 친환경적이며 가격이 저렴한 대나무 기반 1차 탄화숯을 저온 흑연화 공정을 통해 흑연으로 전환 후 음극재로 활용하였다. 저온 흑연화 공정을 위해 탄화철을 촉매로 사용하였으며, 첨가된 탄화철의 양에 따라 흑연화 정도를 X선 회절기(x-ray diffraction, XRD), 라만 분광기(raman spectroscopy), TEM (transmission electron microscopy)을 사용하여 분석 한 후 탄화철의 최적 양을 결정하였다. 가스흡착법(brunauer-emmett-teller, BET)를 사용하여 흑연화 숯의 기공특성도 분석하였다. 분석 결과 촉매 표면을 중심으로 비정질의 탄소가 흑연으로 전환되었으며, 흑연화 공정 후 촉매를 제거하기 위해 산 처리를 하는 동안 기존의 1차 탄화숯보다 크기가 큰 기공이 형성되어 상대적으로 표면적이 줄어들었다. 최적 양의 촉매를 사용하여 제조된 흑연화 숯을 음극재로 활용하여 전지성능을 분석한 결과 1차 탄화숯과 비교하여 방전용량과 충방전 효율이 증가하였다. 이는 흑연화 공정으로 비정질의 탄소가 흑연으로 전환되었기 때문으로 추정되며, 전지성능을 더욱 향상시키기 위해서는 탄화철 촉매의 크기를 최대한 작게 조절하고, 흑연화 숯의 입자크기를 균일화 하는 연구가 필요할 것으로 사료된다.

• Journal of the Korean Wood Science and Technology
• /
• 제48권2호
• /
• pp.181-195
• /
• 2020

본 연구는 평로탄화로 이용한 성형목탄 제조과정에서 얻은 탄화된 바이오매스의 특성을 분석하였으며, 기계적 전처리 및 평로탄화로 내 위치에 따른 특성 차이를 비교하고자 하였다. 성형목탄 제조업체에서 채취된 바이오매스 1종과 탄화 바이오매스 5종의 시료를 대상으로 선별(screening) 및 분쇄(grinding)를 통해 분석시료의 입자크기 범위별로 분류한 후, 고정탄소, 회분, 휘발성 화합물, 원소 함량, 발열량을 측정하였다. 실험 결과, 평로탄화로의 위치에 따라서는 중간층의 탄화 바이오매스 발열량이 20.4 MJ/kg으로 가장 높은 연료적 특성을 나타내었다. 선별 입자 크기에 따라서는 100 mesh 이하의 탄화 바이오매스에서 회분함량이 가장 낮았고 발열량, 탄소 함량, 고정탄소 함량은 높았다. 상관관계 분석 결과 회분 함량은 발열량, 휘발성화합물, 고정탄소, 탄소 함량과 모두 음의 상관관계를 나타내어 회분 함량이 연료적 특성에 부정적인 영향을 미치는 것을 확인하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제26권2호
• /
• pp.6-15
• /
• 1998

A total of forty five-ply, 30- by 30-cm lauan and larch plywood sheets were manufactured in the laboratory using commercial urea and phenol resin adhesives; half of these sheets were treated with fresh concrete. Each sheet was carbonized for 2, 4, and 6hours at $400^{\circ}C$, $600^{\circ}C$, and $750^{\circ}C$, respectively, and their physical properties were measured. The yie1d of charcoal decreased as carbonization temperature and time increased. Charcoal yield was greater in plywood than in veneer, and slightly greater in plywood treated with concrete compared to untreated plywood. Plywood manufactured with phenol resin adhesive had higher pH, higher equilibrium moisture content (EMC), and greater adsorption of methylene-blue dye compared to plywood manufactured with urea resin. For concrete-treated plywood, pH was greater than 10 even when the sheets were carbonized for 2hours at $400^{\circ}C$. Although the EMC of the phenol resin plywood was higher than that of the urea resin plywood, EMC of the phenol resin was lower than that of the urea resin. The larch phenol resin plywood that was carbonized for 6 hours at $750^{\circ}C$ adsorbed more methylene-blue than did the commercia1 wood-based activated charcoal as a result of total pore volume and surface area.

• 대한화학회지
• /
• 제6권1호
• /
• pp.47-53
• /
• 1962

The "reactivity" of coal is one of the important characteristics of a coal used as a process raw material as well as a fuel. In this study, the reactivity was measured in terms of the magnitude of the reaction rate constant in the reduction of carbon dioxide with coal. A reactivity-testing apparatus was designed and constructed, and its performance characteristics were investigated by using Korean anthracite and hard-wood charcoal. Experiments were carried out at temperatures ranging from 750 to 1100$^{\circ}C$ with pulverized Korean anthracite whose sizes range from 1 to 10mm in diameter. Results showed that the reaction rate constant was not appreciably affected by the particle size investigated, and the reactivities of the anthracite and the charcoal were found to be a function of reaction temperature alone. It was also found that a straight line was produced when the logarithm of the rate constant is plotted against the reciprocal of the absolute temperature. The reactivities of the charcoal were found to be 2 to 10 times higher than those of the anthracite at a temperature ranging from 750 to 1100$^{\circ}C$, and 90% of carbon dioxide was reduced to carbon monoxide by the anthracite at a temperature above 1050$^{\circ}C$.

• 한국의류학회지
• /
• 제34권7호
• /
• pp.1205-1219
• /
• 2010

This study analyzes the conditions and products of internet shopping malls that sell natural dyeing products. In this study, 98 natural dyeing internet shopping malls were selected. The results of this study are as follows. The locations of the internet shopping malls were Gyeonggi-do, Seoul, Jeollanam-do, Gyeongsangbuk-do, Gwang-ju (city), Daegu (city), Busan (city), Gyeongsangnam-do, and Jeju-do. The most frequent dyes of the natural dyeing products were loess, followed by charcoal, indigo, and persimmon. Indigo was most frequently used in Seoul, with loess and charcoal most frequent in Gyeonggi-do. Persimmon, indigo, loess, and charcoal were mainly used in Jeollanam-do, with persimmon and loess in the Gyeongsangbuk-do, and persimmon in Jeju-do. The highest ordered product categories were accessories, followed by adult clothing, interior decoration products, and bedding. The most frequent products were bedclothes, followed by scarves, female shirts, blouses, pillows, female jackets, and vests. Regarding the price of products, 150,000-200,000 won was the highest for the Saenghwal Hanbok, with 10,000-30,000 won for underwear, 30,000-60,000 won for accessories, and 100,000-150,000 won for bedding. Concerning product information, 58.2% of internet shopping malls offer the product size and almost half of them did not show the properties or directions for handling the product. Based on the research results, the problems of the conditions and products of natural dyeing internet shopping mall were derived. The results show that the natural dyes of internet shopping malls lacked regional symbolism, the products were not specialized, and product information was not fully offered to consumers. To solve these problems, the strategies for marketing the promotion of the natural dyeing internet shopping mall were, ‘Using natural dyes from local resources’, ‘Market oriented and specialized item design’, and ‘Offer right product information’.