• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.2
• /
• pp.217-224
• /
• 2014

A total of 150 growing ducks were assigned to five dietary treatments to study the effect of sea tangle and charcoal (STC) supplementation on growth performance and meat characteristics in a completely randomized design. There were six replicates and five ducklings in each replication. The five dietary treatments were control, antibiotic, and 0.1%, 0.5%, and 1% STC supplemented diets. No significant differences were found on ADG, ADFI, and gain:feed among treatments in different weeks. The overall (0 to 3 weeks) ADFI decreased in antibiotic treatment (p<0.05) whereas the gain:feed increased significantly upon 1.0% STC supplementation compared to control (p<0.05). No significant variation was found in meat chemical composition except crude fat content which was high in 1.0% STC dietary group (p<0.05). Meat cholesterol was reduced in 0.1% STC group (p<0.05) compared to other dose levels while serum cholesterol was unaffected. High density lipoprotein (HDL) content was high in 1.0% STC (p<0.05) and low density lipoprotein (LDL) was low in 0.1% and 1.0% STC dietary groups (p = 0.06). No significant effect was found on the thiobarbituric acid reactive substances (TBARS) of fresh meat, whereas the TBARS value of meat preserved for 1 week was reduced significantly in STC dietary groups (p<0.05). The 0.1% STC dietary group showed an increased myristic acid (p = 0.07) content whereas, the content of eicosapentaenoic (EPA) and docosahexaenoic (DHA) acids increased in STC supplementation than antibiotic group (p<0.05). An increased concentration of omega-3 fatty acids and a reduced ratio of n-6/n-3 PUFA ratio was found upon 1.0% STC supplementation compared to antibiotic dietary group (p<0.05). Therefore, 1.0% STC dietary supplementation can be used as alternatives to antibiotics in duck production.

• International Journal of Safety
• /
• v.3 no.1
• /
• pp.27-31
• /
• 2004

Some of the petroleum products contain benzene which is well known as a confirmed human carcinogen. For example, gasoline products contain benzene ranging up to several percents by weight. High exposures to the benzene and other organic solvents would be likely to occur during intermittent tasks and or processes rather than continuous jobs such as sampling, repair, inspection, and loading/unloading jobs. The work time for these jobs is various. However, most of work time is very short and the representative time interval is 15 minutes. Thus, it is preferable to do exposure assessment for 15 minute time weighted average which is known as a short time exposure level(STEL) by ACGIH rather than for 8-hours TWA. It is particularly significant to the exposure monitoring for benzene since it has been known that the exposure rate plays an important role to provoke the leukemia. Due to the large variations, a number of processes/tasks, the traditional sampling technique for organic solvents with the use of the charcoal and sampling pumps is not appropriate. Limited number of samples can be obtained due to the shortage of sampling pumps. Passive samplers can eliminate these limitations. However, low sampling rates resulted in collection of small amount of the target analysts in the passive samplers. This is originated the nature of passive samplers. Field applications were made with use of passive samplers to compare with the charcoal tube methods for 15 minutes. Gasoline loading processes to the tank lorry trucks at the loading stations in the petroleum products storage area. Good agreements between the results of passive samplers and those of the charcoal tubes were achieved. However, it was found that special cautions were necessary during the analysis at very low concentration levels.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.1
• /
• pp.39-49
• /
• 2022

Bottom ash generated from thermal power plants is mainly disposed in landfills, from which metals may be leached by infiltrating water. To evaluate the effect of metals in leachate on soil and groundwater, we characterized bottom ash generated from burning cokes, bituminous coal, the mixture of bituminous coal and wood pellets, and charcoal powder. The bottom ash of charcoal powder had a relatively large particle size, and its wood texture was well-preserved from SEM observation. The bottom ash of charcoal powder and wood pellets had relatively high K concentration from total element analysis. The eluates of the bottom ash samples had appreciable concentrations of Ca, Al, Fe, SO₄, and NO₃, but they were not a significant throughout the batch test. Therefore, it is considered that there is low possibility of soil and groundwater contamination due to leaching of metal ions and anions from these bottom ash in landfills. To estimate the trend of various trace elements, long-term monitoring and additional analysis need to be performed while considering the site conditions, because they readily adsorb on soil and aquifer substances.

• Food Science of Animal Resources
• /
• v.32 no.2
• /
• pp.228-233
• /
• 2012

This study was conducted to determine the effects of stevia (Stevia rebaudiana bertoni) and charcoal supplementation on growth performance, immune response and carcass characteristics of finishing pigs. A total of 420 pigs (LYD) were randomly allocated into 7 treatments with 3 replications. Dietary treatments were 1) T1 (basal diet), 2) T2 (basal diet+0.3% stevia), 3) T3 (basal diet+0.6% stevia), 4) T4 (basal diet+0.3% charcoal), 5) T5 (basal diet+0.6% charcoal), 6) T6 (basal diet+0.3% stevia+0.3% charcoal) and 7) T7 (basal diet+0.6% stevia+0.6% charcoal). During the experimental period, average daily gain (ADG) was higher in T2 and T6 groups than the other treatments (p<0.05). Feed conversion ratio (FCR) was higher in T6 group compared to the others (p<0.05). There were no significant differences in total cholesterol level and glutamic pyruvic transaminase (GPT) activity of blood among treatments. In glutamic oxaloacetic transaminase (GOT) activity, T3, T5, T6 and T7 groups showed lower values (p<0.05) compared to T1. Insulin-like growth factor-1 concentration was higher in T2 and T6 groups than the others (p<0.05), but there were no significant differences in immunoglobulin G, lymphocyte, eosinophil, basophil and atypical lymph levels among treatments. In neutrophil, T6 showed higher level compared to the others (p<0.05). In the carcass characteristics, T6 showed higher level of a carcass grade compared to the other treatments. However, carcass length did not show any significant difference among treatments. As a result, dietary supplementation of 0.3% stevia and 0.3% charcoal showed higher ADG, higher FCR and better immune response resulting in better growth performance and carcass characteristics of finishing pigs.

• Journal of Environmental Health Sciences
• /
• v.40 no.6
• /
• pp.484-491
• /
• 2014

Objectives: A radon emission reducing agent was prepared using charcoal and zeolite, and the amount was measured after coating construction materials with the agent. The availability of the radon emission reducing agent was evaluated. Methods: Construction materials (red brick, cement brick, and gypsum board) coated with reducing agent were placed in a chamber to measure radon emissions. The construction materials were coated one through three times. The spread volume for brick and gypsum board was 50 mL and 75 mL per application, respectively. The amount of radon emitted was measured by RAD-7 after 48 hours. Results: The reduction ratio increased with the number of coatings, and the reduction ratios for red brick, cement brick, and gypsum board were 63.3, 73.6, and 58%, respectively, in the case of three coatings of RA-1. The reduction ratios for red brick, cement brick, and gypsum board were 42.8, 58.1, and 26.2%, respectively in the case of three coatings with RA-2. RA-1 was slightly better than RA-2 in radon emission reduction. Conclusions: Radon emissions from construction materials decreased according to the concentration of reducing agent coating, and it was more effective than existing methods.

• Journal of Korean Society for Atmospheric Environment
• /
• v.11 no.2
• /
• pp.185-190
• /
• 1995

Recently, because of the worse of the air pollution, the excessive airtught of building and the inferiority of air conditioning system, the development of high efficiency air purification technology was enlarged to the environmental improvement of an indoor or a harmful working condition. The air purification technology has used chemical filters or charcoal filters or charcoal to remove hazardouse gaseous pollutants (SO$_{x}$, NO$_{x}$, NH$_{3}$, etc.) by air pollutant control technology, but they have many problems of high pressure loss, short life, wide space possession, and treatment of secondary wastes. For these reason, the object of reasearch shall be hazardous gaseous pollutants removal by the surface discharge induced plasma chemical process that is A.C. discharge of multistreams applied A.C. voltage and frequency between plane induced eletrode and line discharge eletrode of tungsten, platinum or titanium with a high purified alumina sheet having a film-like plane. As a result, the control performance for hazardous gaseous pollutants showed very high efficiency in the normal temperature and pressure. Also, after comtact oxidation decomposition of harmful gaseous pollutants, the remainded ozone concentration was found much lower than that of ACGIH or air pollution criteria in Korea.rea.

• Journal of Environmental Science International
• /
• v.23 no.10
• /
• pp.1763-1773
• /
• 2014

It is known that mackerel and pork belly release a strong odor in the process of roasting. We evaluated a dilution factor of odor arising during roasting mackerel or pork belly and the relative odor strength using several cooking tools and analyzed compounds causing odors with gas chromatograph/mass detector. Roasting pans used were grill with lid, electric grill without lid and general roasting pan, and a grill with lid can attach the activated carbon charcoal deodorant at the inside of lid. And all electric grills have a drip tray under the heater. We investigated characteristics of odor emission depending on the presence of water and deodorants in these cooking tools. Study has shown that roasting mackerel produces approximately 36 time more odors than roasting pork belly, and the reduced odor emission when roast with water. And it shows the reduced deodorant effect when cooked with water after attaching activated carbon charcoal in the cooking pan. Major odor causing compounds arising when cooking mackerel and pork belly were aldehydes with high boiling point such as octyl aldehyde with a low odor threshold value.

• Korean Journal of Plant Tissue Culture
• /
• v.25 no.1
• /
• pp.63-68
• /
• 1998

Multiple shoots obtained in MS medium suppler with 5.0 mg/L BA though shoot-tip culture. The frequency of vitrified shoot was lower on Bacto-agar medium than on Gelrite as gelling agent. Addition of activated charcoal at concentrations of 0.1~0.3% reduced vitrification and markedly increased shoot growth, and formation and growth of roots, but significantly reduced the number of shoots formed. The ratio of fresh weight to dry weight was decreased by increasing light intensity and agar concentration. Eight-tenths times of macroelement of MS medium was observed to be effective for shoot formation. Addition of IAA effectively promoted shoot formation in both shoot tip and node-bud explants. Supplement of 5.0 mg/L BA, 0.3 mg/L IAA to MS medium was most effective in shoot proliferation on shoot tip and node-bud explants.Multiple shoots obtained in MS medium suppler with 5.0 mg/L BA though shoot-tip culture. The frequency of vitrified shoot was lower on Bacto-agar medium than on Gelrite as gelling agent. Addition of activated charcoal at concentrations of 0.1~0.3% reduced vitrification and markedly increased shoot growth, and formation and growth of roots, but significantly reduced the number of shoots formed. The ratio of fresh weight to dry weight was decreased by increasing light intensity and agar concentration. Eight-tenths times of macroelement of MS medium was observed to be effective for shoot formation. Addition of IAA effectively promoted shoot formation in both shoot tip and node-bud explants. Supplement of 5.0 mg/L BA, 0.3 mg/L IAA to MS medium was most effective in shoot proliferation on shoot tip and node-bud explants.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.1
• /
• pp.104-118
• /
• 1995

This study was performed to evaluate factors affecting desorption of organic solvents collected on charcoal tube and to find out the optimum condition. Desorption efficiency for polar analytes was improved when several polar desorption solvents such as methanol, dimethylformamide(DMF), 2-(2-butoxyethoxy)ethanol were added to carbon disulfide($CS_2$). The best improvement was achieved when 10% dimethylformamide(DMF) in $CS_2$ was used as desorption solvent. During storage of polar analytes, recovery was greatly reduced. Especially, the recovery of cyclohexanone was decreased to 18.1 % after a month storage at $34^{\circ}C$. After two weeks storage, recovery of polar analytes was sharply decreased. Water adsorbed on charcoal interfered the recovery of polar analytes but didn't interfere that one of nonpolar solvent, toluene. When 10% DMF in $CS_2$ was used as desorption solvent, the effect of water on recovery was decreased, comparing with Desorption efficiency increased when analyte loading increased, and usage of 10% DMF in $CS_2$ decreased the loading effect. Increasing volume of desorption solvent was not effective to improve desorption efficiency of analytes when 10% DMF was used. Continuous shaking and sonication is not helpful to increase the desorption efficiency of analytes except cyclohexanone using 10% DMF. When silica gel used as adsorbent, methanol was better desorbent than dimethylsulfoxide. Analytes adsorbed on silica gel showed high recovery in low concentration and less affected by humidity. On the basis of this study, the following conclusions have been drawn. To improve the recovery of polar organic materials in air samples, it is necessary to analyze samples as soon as possible after they were collected. Otherwise, samples must be stored at low temperature. Using two components of desorption solvents, such as 10% DMF in $CS_2$, the effects of loading and humidity decreased for polar analytes such as methyl ethyl ketone and methyl isobutyl ketone. When work place has high humidity with low concentration of polar organic solvents, silica gel can be used as adsorbent, because it produces quantitative recovery for polar analytes at this condition. But it should be noted that high humidity makes breakthrough easy in silica gel samples.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.1
• /
• pp.67-76
• /
• 2024

Objectives: Direct reading instruments (DRIs) are widely used by industrial hygienists and other experts for preliminary survey and identifying source locations in many industrial fields. Photoionization detectors (PIDs), which are a form of hand-held portable DRIs, have been used for a variety of airborne vaporized chemicals, especially evaporated hydrocarbon solvents. The benefits of PIDs are high sensitivity between each chemical, competitive price, and portability. With the goal of increasing the accuracy of logged PID concentrations, previous studies have performed tests for the assessment of single chemical compounds, not mixtures. The purpose of this preliminary study was to measure mixtures with a PID and charcoal tube at the same time and compare the accuracy between them. Methods: A chamber test was implemented with different mixtures of hydrocarbon chemicals (acetone, isopropyl alcohol, toluene, m-xylene) and levels in the range of 14 to 864 ppm. Three PIDs and charcoal tubes were connected to the chamber and measured the chemical mixtures simultaneously. A comparison of accuracy and the PID group of concentrations with manufacture correction factor (M_CF) and field correction factor (F_CF) applied was performed. Results: The accuracy of the PID concentrations data-logged from the PID did not meet the accuracy criteria except for the mixture level B and C logged from PID No. 2, which was 18% of all tests for meeting accuracy criteria. The mean and standard deviation (SD) of concentration (ppm) of the charcoal tube followed by each mixtures' level were 10.37±0.26, 155.33±5.28, 300.80±11.65, and 774.93±22.65, respectively. When applying F_CF into the PID concentrations, the accuracy increased by nearly 82%. However, in the case of M_CF, none met the accuracy criterion. Between the PID there were differences of logged concentrations. Conclusions: In this preliminary study, the concentration of a logged PID with F_CF applied was a better way to increase accuracy compared to applying M_CF. We suggest that additional research is necessary to consider environmental factors such as temperature and humidity.