• Economic and Environmental Geology
• /
• v.55 no.6
• /
• pp.701-716
• /
• 2022

This study investigated the distribution behaviors of PM2.5 and PM10 at two air quality monitoring sites, Go-eup (GO) and Backseokeup (BS), located in Yangju City, South Korea. The amounts of emissions sources of pollutants were analyzed based on the Clean Air Policy Support System (CAPSS), and the contribution rates of neighboring cities were enumerated in Yangju. Yangju has a geological basin structure, and it is a city with mixed urban and rural characteristics. The emission concentration of particulate matter was affected by geological and seasonal factors for all sites observed in this study. Therefore, these factors should be considered when establishing policies related to particulate matter. Because the official GO and BS station sites in Yangju are both situated in the southern part of the city, the representativeness of both stations was checked using correlation analysis for the measurement of PM2.5 and PM10 by considering two more sites-those of Bongyang-dong (BY) and the Gumjun (GJ) industrial complex. The data included discharge amounts for business types 4 and 5, which were not sufficiently considered in the CAPSS estimates. Because the 4 and 5 types of businesses represent over 92.6% of businesses in this city, they are workplaces in Yangju that have a significant effect on the total air pollutant emission. These types of businesses should be re-inspected as the main discharge sources in industry, and basic data accumulation should be carried out. Moreover, to manage the emission of particulate matter, attainable countermeasures for the main sources of these emissions should be prepared in a prioritized fashion; such countermeasures include prohibition of backyard burning, supervision of charcoal kilns, and management of livestock excretions and fugitive dust in construction sites and on roads. The contribution rates by neighboring cities was enumerated between 6.3% and 10.9% for PM2.5. Cooperation policies are thought to be required with neighboring cites to reduce particulate matter.

• Journal of the Korean Society of Radiology
• /
• v.11 no.5
• /
• pp.297-302
• /
• 2017

Recently, building materials and air purification filters with eco-friendly charcoal are actively studying to reduce the concentration of radon gas in indoor air. In this study, radon reduction performance was assessed by designing and producing new panel-type activated carbon filter that can be handled more efficiently than conventional charcoal filters, which can reduce radon gas. For the fabrication of our panel-type activated carbon filter, first the pressed molding product after mixing activated carbon powder and polyurethane. Then, through diamond cutting, the activated carbon filter of 2 mm, 4 mm and 6 mm thickness were fabricated. To investigate the physical characteristics of the fabricated activated carbon filter, a surface area and flexural strength measurement was performed. In addition, to evaluate the reduction performance of radon gas in indoor, the radon concentration of before and after the filter passes from a constant amount of air flow using three acrylic chambers was measured, respectively. As a result, the surface area of the fabricated activated carbon was approximately $1,008m^2/g$ showing similar value to conventional products. Also, the flexural load was found to have three times higher value than the gypsum board with 435 N. Finally, the radon reduction efficiency from indoor gas improved as the thickness of the activated carbon increases, resulting in an excellent radon removal rate of more than 90 % in the 6 mm thick filter. From the experimental results, the panel-type activated carbon is considered to be available as an eco-friendly building material to reduce radon gas in an enclosed indoor environment.

• Journal of Plant Biotechnology
• /
• v.35 no.3
• /
• pp.203-208
• /
• 2008

In order to micropropagate uniform plantlets of Philodendron cannifolium in vitro, the shoot tips were cultured on MS media supplemented with $0.5{\sim}10.0$ mg/L BA or $0.05{\sim}0.1$ mg/L thidiazuron(TDZ). The adventitious multi-bud clusters from basal part of shoots were formed on MS media containing $2.0{\sim}5.0$ mg/L BA or $0.05{\sim}0.1$ mg/L TDZ. But the shoots grown on MS media with TDZ showed necrosis by the lack of chlorophyll. The adventitious multi-bus clusters were cut into $5{\sim}7$ mm sections and cultured on MS media containing BA and TDZ for shoot proliferation. Shoots were proliferated vigorously on MS medium supplemented with $1.0{\sim}3.0$ mg/L BA with up to 30 shoots. But abnormally swollen hard calli were formed from basal parts of shoots on MS media with TDZ and high concentration of BA(10.0 mg/L). The proliferated shoots on same media also showed necrosis by the lack of chlorophyll. The shoot growth and rooting were favorable on MS media containing $0.5{\sim}2.0$ mg/L IBA. The rooted plantlets were acclimatizated effectively in soil mixed with perlite 1:vermiculite 1 or vermiculite alone. Fifteen mL of liquid medium containing 10 g/L activated charcoal and 30 g/L sucrose were added in same vessels after small shoots were proliferated to stimulate shoot growth and rooting. After 8 weeks in culture, the shoots were dipped into high concentration of IBA solution. and planted in soil mexed with perlite 1:vermiculite 1. The shoot growth and rooting were favorable in dipping treatments of $500{\sim}2,000$ ppm IBA solutions for 10 sec.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.3
• /
• pp.287-291
• /
• 2009

In order to use Corni fructus as functional food materials, we investigated the biological activities of ethanol extracts from Corni fructus (EECF). The hydrogen-donating activity of EECF was increased in a dose dependent manner compared with untreated control, and the activities by EECF were 64 and 74% at 300 and $500{\mu}g/mL$ concentration, respectively. The NO productions in the RAW264.7 marcrophage cells treated with EECF were increased in dose dependent manners. EECF significantly inhibited the growth of MCF-7 human breast cancer cells in dose and time dependent manners. EECF of $500{\mu}g/mL$ concentration inhibited the proliferation by over 60% in the MCF-7 cells when treated for 72 hr. Also, the proliferations were increased in the MCF-7 cells cultured in the charcoal-treated FBS (cFBS) medium with environmental hormones such as bisphenol or $17{\beta}$-estradiol of $0.1{\mu}M$ whereas the proliferations were decreased in the MCF-7 cells treated with the environmental hormones after treatment of EEFC for 72 hr. The results suggest that Corni fructus would be used as functional food materials.

• Journal of Plant Biotechnology
• /
• v.40 no.2
• /
• pp.79-87
• /
• 2013

The aim of this study was to establish plant regeneration from leaf explants of Sedum tosaense Makino, which is globally rare and endangered species. The leaf explants of S. tosaense were cultured on the MS medium supplemented with different concentration of BA and NAA for callus induction. Callus induction was showed the highest (100%) on MS medium containing $2.0mg{\cdot}L^{-1}$ BA and $1.0mg{\cdot}L^{-1}$ NAA. The highest number of shoots were regenerated when callus were cultured on MS medium containing $2.0mg{\cdot}L^{-1}$ BA and $1.0mg{\cdot}L^{-1}$ NAA for 5 weeks. The axillary bud were cultured on the MS media supplemented with combination of BA and NAA for in vitro propagation. The highest number of adventitious shoot (7.9 per explants) formed at $1.0mg{\cdot}L^{-1}$ NAA and $2.0mg{\cdot}L^{-1}$ BA. For rooting, MS medium supplemented with or without $2.0g{\cdot}L^{-1}$ activated charcoal was tested. The optimal results were observed using MS medium supplemented with $2.0g{\cdot}L^{-1}$ activated charcoal, on which 85.7 (No. of root), 4.6 cm (length of root). 1,200 ppm $CO_2$ and 350 ppm $CO_2$ were supplied for make certain the effects of $CO_2$ on pre-acclimatization by photoautotrophic culture. 1,200 ppm $CO_2$ treatment was established higher than 350 ppm $CO_2$ treatment. Soil acclimatization of in vitro plantlets was the best in mixture soil consisted of peat moss and perlite with 100% survival rate and they showed the maximum growth.

• Economic and Environmental Geology
• /
• v.55 no.1
• /
• pp.97-109
• /
• 2022

This study focused on the physicochemical effects of bottom ash dissolved precipitation on the soil and groundwater environment. The iced column and percolation experiments showed that most of the bottom ash particles were drained as the ash-dissolved solution, while the charcoal powder was filtered through the soil. Ion species of Al, As, Cu, Cd, Cr, Pb, Fe, Mn, Ca, K, Si, F, NO₃, SO₄ were analyzed from the eluates collected during the 24 h column test. In the charcoal powder eluates, a high concentration of K was detected at the beginning of the reaction, but it decreased with time. The concentrations of Al and Ca were observed to increase with time, although they existed in trace amount. In the bottom ash eluates, the concentrations of Ca and SO₄ decreased by 30 mg·L^-1 and 67 mg·L^-1, respectively, over 24 h. It is regarded that the infiltration patterns of the bottom ash and biochar in the unsaturated zone were different owing to their particle sizes and solvent properties. It is expected that a significant amount of the bottom ash will mix with the precipitation and percolate below the water table, especially in the case of thin and highly permeable unsaturated zone. The biochar was filtered through the unsaturated zone. The biochar did not dissolve in the groundwater, although it reached the saturation zone. For these reasons, it is considered that the direct contamination by the bottom ash and biochar are unlikely to occur.

• Korean Journal of Agricultural Science
• /
• v.34 no.2
• /
• pp.143-150
• /
• 2007

This study was carried out to develope an antibiotic substitute with some feed additive ingredients; activated charcoal, microbial products(Saccharomyces cerevisiae), sodium bentonite and pyroligneous. Sixty Holstein male calves(control 30 and tested 30 calves) were assigned to one of two diets, control(containing commercial antibiotic) and treatment diet (containing antibiotic substitute) with three replicates(10 calves each). The experiment were carried out for 30 days. The daily weight gains were similar between control(1.01kg/d) and treatment groups(1.01kg/d), however feed requirement were lower for treatment calves (2.80kg) than control calves (3.24kg) (P<0.05). Also calves were more health for treatment calves than control calves for diarrhea and respiratory diseases occurrences. The ammonia concentration of feces were lower for treatment calves(2.67 ppm) than for control calves(6.33 ppm) (P<0.05). No statistical difference were found in blood substances between control and treatment calves(P>0.05). In conclusion, the calve performances were improved by substitute without commercial antibiotic additive.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.2
• /
• pp.119-127
• /
• 1995

The purpose of this study was to determine the effects of surface-treatment by zinc salts on break-through and adsorption capacity of toluene. Firstly, the coconut activated carbon treated the surface with zinc salts, were exposed by the spike sample(toluene, 69.02ppm, $260.1mg/m^3$), and then the effects of zinc salts were examined by using the gas adsorption kinetics. The results obtained were as follows : 1) BET(Brumaure Emmett Teller) surface area were $954.4m^3/g$ in coconut activated carbon treated with 0.0001 N $Zn(NO_3)_3$ $6H_2O$, and $830.3m^2/g$ in coconut activated carbon treated with 0.0001 N $ZnCl_2$. 2) Migration was decreased in coconut activated carbon treated with the thin level of zinc salts. 3) Breakthrough volume were 73.07 L in coconut activated carbon treated with 0.0001 N $Zn(NO_3)_3$ $6H_2O$, and 72.76 L in charcoal treated with 0.0001 N $ZnCl_2$. 4) ${\tau}$ values(the time required for 50% breakthrough) were 1046.1 min in coconut activated carbon treated with 0.0001 N $ZnCl_2$ and 921.2 min in coconut activated carbon treated with 0.0001 N $Zn(NO_3)_3$ $6H_2O$. 5) Maximum adsorption capacity was 53.9 mg/tube in coconut activated carbon treated with 0.0001 N $ZnCl_2$ and 47.4 mg/tube in coconut activated carbon treated with 0.0001 N $Zn(NO_3)_3$ $6H_2O$. In conclusion, the coconut activated carbon treated the surface with the thin concentration of zinc salts, decreased the breakthrough and increased the BET surface area and the adsorption capacity in case of sampling airborne toluene.

• Resources Recycling
• /
• v.11 no.1
• /
• pp.3-8
• /
• 2002

In order to make the high purity Mn$_3$O$_4$powder for the raw material of soft ferrite, Mn is extracted from the dust and the extracted solution is refined. The dust is generated in producing a medium-low carbon ferromanganese and contains 90% Mn$_3$O$_4$. Mn$_3$O$_4$in the dust was reduced into MnO by roasting with charcoal. Injection of the 180g/L of the reduced dust into 4N HCI solution increased pH of the leaching solution higher than 5 and then a ferric hydroxide was precipitated. Because the ferric hydroxide co-precipitates with Si ion etc, Fe and Si ion was removed from the solution and the about 10% Mn solution was obtained. The solution was diluted with water to Mn-15000 ppm and $NH_4$F was injected into the diluted solution at $70^{\circ}C$ to the F-3000 ppm. As a result, Ca ion is precipitated as $CaF_2$and the residual concentration of Ca was 14 ppm. Injection of the equivalent (NH$1.5M_4$)$_2$$CO_3$solution as 2 L/min at $25^{\circ}C$ into the above solution precipitated a fine and high purity $MnCO_3$powder. The deposition was filtrated and roasted at $1000^{\circ}C$ for 2 hours. As a result, $MnCO_3$powder is converted into $Mn_3$$O_4$powder and it had $8.2\mu$m of median size. The final production is above 99% $Mn_3$$O_4$powder and it satisfied the requirement of high purity $Mn_3$$O_4$powder for a raw material of soft ferrite.

• The Korean Journal of Ecology
• /
• v.24 no.2
• /
• pp.93-100
• /
• 2001

One-year-old cottonwood (Populus deltoides Bartr.) clones, which were classified as sensitive or tolerant, were exposed to 150 n1/1 ozone (O$_3$) over 8 days for 8 hours each day under glass chamber conditions with natural sunlight. The leaves of the sensitive clone had black stipple and bifacial necrosis after $O_3$ treatment. Photosynthesis and stomatal conductance were measured before, during, and after the $O_3$ treatment. The photosynthetic rates due to $O_3$ treatment were decreased 51 percent and 34 percent on the sensitive and tolerant clone, respectively. The stomatal conductance of the sensitive clone was more than 40 percent higher than that of the tolerant clone regardless of the $O_3$ treatment. As light intensity increased, the $O_3$ effect on photosynthesis was clear. Compared to the previous growth chamber studies, our natural light exposure system was able to maintain a stable photosynthetic responses of the control treatment throughout the fumigation period. In addition, changes in assimilation versus intercellular $CO_2$ concentration (A/C curves) showed that $O_3$ decreased the slope and asymptote of the curves for the sensitive clone. This indicates that $O_3$ decreases the biochemical capacity of photosynthesis on the sensitive clone. Chlorophyll contents and fluorescence of the two clones were analyzed to examine the $O_3$ effects on photosystem 11, but $O_3$ did not impact these variables on either clone. Although the tolerant clone did not show any foliar injury, we could not find any ecophysiological defensive responses to $O_3$ treated. Stomatal conductance of the tolerant clone was originally much lower than that of the sensitive one. Thus, the mechanisms of the tolerant clone in this system are to narrowly open stomata and efficiently maintain photosynthesis with a more durable biochemical apparatus of photosynthesis under $O_3$ stress. The sensitive clone has higher photosynthetic capacity and more efficient light reaction activity than the tolerant one under charcoal filtered condition, but is not as resilient under stress.