• Resources Recycling
• /
• v.11 no.1
• /
• pp.9-18
• /
• 2002

Printed wiring boards(PWBs) of the obsolete computers are composed of various organic and inorganic compounds as well as metals and alloys. As convinced that the valuable metals obtained from the PWBs are effectively utilized as secondary resources when recovered by economical methods, in this study, an investigation for characterizing the physical separation techniques is conducted. For the recovery of them, the sockets and chips dismantled from PWBs by scraping and residual resin boards are subjected to the appropriate separation processes according to the physical properties of each part. In the case of crushed socket scraps size ranged from -2.36 mm to +1.18 mm, approximately 97 wt% of the product obtained by magnetic separation consists of metallic compounds. In the case of chip scraps, 97% of Fe-Ni alloy and 95% of Cu metal are recovered by the combined process of air classification and dry magnetic separation in the size range from -2.36 mm to +0.15 mm. Ball milling is adopted in order to improve the removal efficiency of the thin-printed metallic materials on the residual resin boards and approximately 77% of Cu metal is recovered by zigzag separation after ball milling.

• Toxicological Research
• /
• v.18 no.3
• /
• pp.249-257
• /
• 2002

Cytochrome P450 3As such as 3A4 and 3A5 metabolize a wide range of pharmaceutical compounds. The vectors for the expression of fusion protein containing an N-terminal human P450 3A4 or P450 3A5 sequences and a C-terminal rat NADPH-cytochrome P450 reductase moiety were constructed. These plasmids were used to express the fusion protein in Escherichia coli DH5$\alpha$ cells. High levels of expression were achieved (100~200 nmol/liter) and the expressed fusion protein in E. coli membranes were catalytically active for nifedipine oxidation, a typical enzymatic activity of P450 3A4. The NADPH-P450 reductase activities of these fusion protein were also determined by measuring reduction of cytochrome c. To fine a specific Inhibitor of P450 3A4 from naturally occurring chemicals, a series of isothiocyanate compounds were evaluated for the inhibitory activity of P450 using the fusion proteins in E. coli membranes. Of the five isothiocyanates (phenethyl isothiocyanate, phenyl isothiocyanate, benzol isothiocyanate, benzoyl isothiocyanate and cyclohexyl isothiocyanate) tested, benzoyl isothiocyanate showed a strong inhibition of P450 3A4 with an $IC_{50}$value of 2.8 $\mu\textrm{M}$. Our results indicate that the self-sufficient fusion protein will be very useful tool to study the drug metabolism and benzyl isothiocyanate may be valuable for characterizing the enzymatic properties of P450 3A4.

• Analytical Science and Technology
• /
• v.33 no.2
• /
• pp.98-107
• /
• 2020

Methamphetamine (MA) is currently the most abused illicit drug in Korea. MA is produced by chemical synthesis, and the final target drug that is produced contains small amounts of the precursor chemicals, intermediates, and by-products. To identify and quantify these trace compounds in MA seizures, a practical and feasible approach for conducting chromatographic fingerprinting with a suite of traditional chemometric methods and recently introduced machine learning approaches was examined. This was achieved using gas chromatography (GC) coupled with a flame ionization detector (FID) and mass spectrometry (MS). Following appropriate examination of all the peaks in 71 samples, 166 impurities were selected as the characteristic components. Unsupervised (principal component analysis (PCA), hierarchical cluster analysis (HCA), and K-means clustering) and supervised (partial least squares-discriminant analysis (PLS-DA), orthogonal partial least squares-discriminant analysis (OPLS-DA), support vector machines (SVM), and deep neural network (DNN) with Keras) chemometric techniques were employed for classifying the 71 MA seizures. The results of the PCA, HCA, K-means clustering, PLS-DA, OPLS-DA, SVM, and DNN methods for quality evaluation were in good agreement. However, the tested MA seizures possessed distinct features, such as chirality, cutting agents, and boiling points. The study indicated that the established qualitative and semi-quantitative methods will be practical and useful analytical tools for characterizing trace compounds in illicit MA seizures. Moreover, they will provide a statistical basis for identifying the synthesis route, sources of supply, trafficking routes, and connections between seizures, which will support drug law enforcement agencies in their effort to eliminate organized MA crime.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.68.1-68
• /
• 2003

When plants are infected by plant pathogens, typical disease symptom termed lesion, appears in compatible interaction. Whereas, in incompatible interactions, only small speck of lesions are visible on the leaf surfaces. Hypersensitive response (HR) of plant which is the result of infection by incompatible pathogens, is a well known defense response inducing rapid cell death resulting in complete resistance. However, some rice mutants show spontaneous disease symptoms during the growth stages without interaction with pathogens. We investigated the spontaneous cell death mutant called Blast Lesion Mimic(BLM) generated by EMS mutation, on the relationship with the hypersensitive response as well as resistant characteristics. Accumulation of phenolic compounds were detected around the lesions as lesions develop on leaf surface. Activation of PR gene was detected before the lesion appeared, and that result indicates the defense-related response are started earlier than lesion formation. The BLM mutant showed resistant response to inoculation of Magnaporthe grisea KJ201 with which the wild type Hwacheong is totally susceptible. Informations on the formation of spontaneous lesions and detail analysis of lesion mimic mutants and related genes are very limited to date. It is really important to understand the phenomenon of the defense-related lesion formation for developing resistant cultivar for rice blast pathogens

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.206-209
• /
• 2008

The modified supercritical water treatment method is adopted for hydrolysis of wood powder, Populus alba$\times$glandulosa. This modified method is containing 0.05% HCl or $HNO_3$ as acid catalyst. The supercritical water treatment(SCW) was performed for 1 min. with $350^{\circ}C$, $380^{\circ}C$, $400^{\circ}C$ and $425^{\circ}C$, respectively, under 230 $\pm$ 10 atm using continuous flow system. When acid was added to powder prepared for SCW treatment, the yields of monomeric sugars were significantly increased. The lignin remained after supercritical treatment was applied to gel permeation chromatography(GPC) for molecular weight distribution analysis. Compared to the lignin produced from SCW treatment without acid catalyst, the average molecular weight of lignin compounds treated with acid was clearly decreased. Particularly, Mn/Mw ratio is decreased. This result shows supercritical water treatment of wood powder can change the molecular weight of lignin to small size. However, it is necessary to be further studied for exactly characterizing the lignin produced from supercritical water treatment.

• ETRI Journal
• /
• v.22 no.1
• /
• pp.38-46
• /
• 2000

The extraction of model parameters for embedded passive components is crucial for designing and characterizing the performance of multichip module (MCM) substrates. In this paper, a method for optimizing the extraction of these parameters using genetic algorithms is presented. The results of this method are compared with optimization using the Levenberg-Marquardt (LM) algorithm used in the HSPICE circuit modeling tool. A set of integrated resistor structures are fabricated, and their scattering parameters are measured for a range of frequencies from 45 MHz to 5 GHz. Optimal equivalent circuit models for these structures are derived from the s-parameter measurements using each algorithm. Predicted s-parameters for the optimized equivalent circuit are then obtained from HSPICE. The difference between the measured and predicted s-parameters in the frequency range of interest is used as a measure of the accuracy of the two optimization algorithms. It is determined that the LM method is extremely dependent upon the initial starting point of the parameter search and is thus prone to become trapped in local minima. This drawback is alleviated and the accuracy of the parameter values obtained is improved using genetic algorithms.

• Membrane Journal
• /
• v.12 no.3
• /
• pp.143-150
• /
• 2002

Electrodialysis(ED) is a reliable and effective process for the separation and concentration of ionic compounds. However, commercial uses of ED are often hindered by the cost of the stack that mainly resulted from the ion-exchange membrane cost. In order to minimize the membrane cost, it is desired to operate ED at the highest practicable current density. In an actual ED system the high current operation is limited by the concentration polarization phenomenon. This article illustrates the transport phenomena of ions through ion exchange membranes using current-voltage relations as a characterizing method. Also recent studies on electroconvection and water-spitting phenomena caused by concentration polarization were reviewed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.6
• /
• pp.511-518
• /
• 1985

As one of the sensory factors for characterizing food quality, volatile compounds have been particularly contributed to sensory evaluation of fermented sea foods in Korea. But no chemical investigation of the volatile compounds of fermented anchovy as one of the most favored fermented sea food products has been reported. Accordinglry, for a series study of processing of low salt fermented sea foods, changes in volatile compounds and fatty acid composition of fermented anchovy with low salt contents ($4\%$ of salt contents) were experimented fermentation comparing with conventional fermented anchovy ($20\%$ of salt contents). Total lipid of raw anchovy was composed of $77.6\%$ of neutral lipid, $22.1\%$ of phospholipid and $0.3\%$ of glycolipid. And polyenoic acid was held $39.8\%$ of fatty acid composition of total lipid and the major fatty acids in those were $C_{22:6},\;C_{20:5}$. During the fermentation of anchovy saturated fatty acid ($C_{16:0},\;C_{18:0},\;C_{l4:0}$) and monoenoic acid ($C_{16:1},\;C_{18:1}$) increased while polyenoic acid ($C_{22:6},\;C_{20:5}$) decreased greatly. Thirty-eight kinds of volatile component from the whole volatile compounds obtained from fermented anchovy after 90 days fermentation were identified, and composed of some alcohols (8 kinds), carbonyl compounds (9 kinds), hydrocarbons (8 kinds) and fatty acids (8 kinds). During fermentation 8 kinds of volatile acids, 5 kinds of amines, 9 kinds of carbonyl compounds were also detected. Those volatile acids such as acetic acid, isovaleric acid, propionic acid, n-butyric acid were the major portion of total volatile fatty acids of 60 days fermented anchovy prepared with low salt contents. On the other hand, carbonyl compounds such as ethanal, 3-methyl butanal, hexanal, 2-methyl propanal were the major ones, while TMA held the most part of volatile amines in fermented anchovy with low salt contents after 60 days. Conclusively, there was little difference in composition of volatile components, but merely a little difference in content of those between low salt fermented anchovy and conventional fermented ones.

• Journal of Ginseng Research
• /
• v.35 no.4
• /
• pp.487-496
• /
• 2011

Good manufacturing practice (GMP)-based quality control is an integral component of the common technical document, a formal documentation process for applying a marketing authorization holder to those countries where ginseng is classified as a medicine. In addition, authentication of the physico-chemical properties of ginsenoside reference materials, and qualitative and quantitative batch analytical data based on validated analytical procedures are prerequisites for certifying GMP. Therefore, the aim of this study was to propose an authentication process for isolated ginsenosides $Rb_1$ and $Rg_1$ as reference materials (RM) and for these compounds to be designated as RMs for ginseng preparations throughout the world. Ginsenoside $Rb_1$ and $Rg_1$ were isolated by Diaion HP-20 adsorption chromatography, silica gel flash chromatography, recrystallization, and preparative HPLC. HPLC fractions corresponding to those two ginsenosides were recrystallized in appropriate solvents for the analysis of physico-chemical properties. Documentation of the isolated ginsenosides was made according to the method proposed by Gaedcke and Steinhoff. The ginsenosides were subjected to analyses of their general characteristics, identification, purity, content quantitation, and mass balance tests. The isolated ginsenosides were proven to be a single compound when analyzed by three different HPLC systems. Also, the water content was found to be 0.940% for $Rb_1$ and 0.485% for $Rg_1$, meaning that the net mass balance for ginsenoside $Rb_1$ and $Rg_1$ were 99.060% and 99.515%, respectively. From these results, we could assess and propose a full spectrum of physicochemical properties for the ginsenosides $Rb_1$ and $Rg_1$ as standard reference materials for GMP-based quality control.

• Journal of Ginseng Research
• /
• v.40 no.3
• /
• pp.220-228
• /
• 2016

Background: Among the various ginseng strains, Shizhu ginseng is endemic to China, mainly distributed in Kuandian Manchu Autonomous County (Liaoning Province, China); however, not much is known about the compounds (especially saponins) in Shizhu ginseng. Methods: A rapid, sensitive, and reliable ultra-high performance liquid chromatography coupled with MS/MS (UHPLC-MS/MS) method was developed to separate and identify saponins in Shizhu ginseng. Results: The separation was carried out on a Waters ACQUITY UPLC BEH $C_{18}$ column ($100mm{\times}2.1mm$, $1.7{\mu}m$) with acetonitrile and 0.1% formic acid aqueous solution as the mobile phase under a gradient elution at $40^{\circ}C$. The detection was performed on a Micromass Quattro Micro API mass spectrometer equipped with electrospray ionization source in both positive and negative modes. Under the optimized conditions, a total of 31 saponins were identified or tentatively characterized by comparing retention time and MS data with related literatures and reference substances. Conclusion: The developed UHPLC-MS/MS method was suitable for identifying and characterizing the chemical constituents in Shizhu ginseng, which provided a helpful chemical basis for further research on Shizhu ginseng.