• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.3
• /
• pp.573-580
• /
• 2001

When investigating optimum design of the evaporator in the refrigeration and heat pump systems, there is still lack of data for the dynamic characteristics of the evaporator, This is due to the fact that the static characteristics in the evaporator are absolutely difficult to measure and are burdened with uncertainties. In this study, the simulation works for static characteristics in the evaporator of small air conditioner are carried out to obtain the data of dynamic characteristics. In the simulation, the test evaporator is divided by two-phase evaporating region and single-phase heating region. The major parameters are refrigerant flow rate, heat transfer coefficient of air, air velocity and air temperature. The results show that the calculation method for tube length is an easy-to-use to model analysis of static characteristics and to determine state of refrigerant in the evaporator. The effects of the four parameters on the length of evaporating completed point and heat flow rate to the evaporator are clarified.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.3
• /
• pp.635-644
• /
• 1994

This study investigated mainly on the flow characteristics of a droplet in the cross region of twin spray. The velocities of the droplet were measured along the axial and radial direction, and the flow characteristics of the droplet were statistically analyzed. For the statistical analysis, the probability density of the turbulent components has been studied, and then the Reynolds shear stress, the skewness and the flatness factors were calculated, and compared with the Gaussian value. Two pressure swirl stomizers were used for the twin spray system and kerosene was employed as the working liquid. 2-D PDA(particle dynamic analyzer) was used for the purpose of the measurement of droplet size and velocities. As a result, it was found that (1) the droplets collision was taken place strongly in the cross region. So, a large momentum loss of droplets due to the loss of natural movement direction was occurred, and momentum loss of radial direction was greater than that of axial direction. (2) The axial direction skewness factor approached to zero like the Gaussian distribution in the cross region of twin spray. (3) In the cross region of twin spray, the fluctuation instability of droplet was increased because of the development of the turbulence characteristics due to the droplet collision.

• SUVANNABHUMI
• /
• v.11 no.1
• /
• pp.71-100
• /
• 2019

The region between mainland China on the east and the Indian sub-continent on the west is referred to as Southeast Asia since the conclusion of the Pacific War (1941-1945). As a region, Southeast Asia appears as a hodgepodge of disparity and diversity, but a closer scrutiny reveals numerous common attributes and characteristics. This study attempts to identify and examine the cohesive and shared characteristics across the Southeast Asian region from a historical and sociocultural perspective. The intention is to differentiate an identity borne of the underlying commonalities of shared characteristics whether physical, experiential, emotive, and/or in terms of heritage. Subsequently, Southeast Asia has more grounds to claim itself as a distinct region, and an "area of study," besides the political expediency of ASEAN.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.17-30
• /
• 2009

Recently, Interest in the riding of bicycles increased, but existing researches on the effect of bicycle facilities and the supply analysis and evaluation bike analysis of the importance of the item is most fulfilling. Those do not reflect characteristics of the region and the current satisfaction on the riding of bicycles. Therefore, this research will classify Gu Dong of Busan into good region, possible region and difficult region on the riding of bicycles to reflect characteristics of bicycles with the non-power and characteristics of riders with the main purpose of the exercise. Maintenance of bicycles classified according to the region will be decided to the Line-to-Line maintenance as to connect the main point of regions and to the Point-to-Point as to link the main point within region. Then, step-by-step bicycles activation of Busan differentiated by region offers. Also, Survey on Gangseo-Gu, Sasang-Gu, Gijang-Gun with good bicycle conditions and Busan-Jin-Gu with the best maintenance effect will be about the bicycle. The structure model of consciousness-based on the use of bicycles will be made by using Survey results and considering the region characteristics. This structure model will show a correlation of the current satisfaction, the bicycle-related facilities maintenance policy needs, region characteristics and the next intends to riding the bicycle.

• Journal of Forest and Environmental Science
• /
• v.32 no.4
• /
• pp.384-391
• /
• 2016

In this study, regions infected by pine wilt disease were extracted by using object-based classification method (OB-infected region), and the characteristics of special distribution about OB-infected region were figured out. Scale 24, Shape 0.1, Color 0.9, Compactness 0.5, and Smoothness 0.5 was selected as the objected-based, optimal weighted value of OB-infected region classification. The total accuracy of classification was high with 99% and Kappa coefficient was also high with 0.97. The area of OB-infected region was approximately 90 ha, 16% of the total area. The OB-infected region in Age class V and VI was intensively distributed with 97% of the total. Also, The OB-infected region in Middle and Large DBH class was intensively distributed with 99% of the total. In terms of the topographic characteristics of OB-infected region, the damages occurred approximately 86% below the altitude of 200 m, and occurred 91% with a slope less than 10 degree. The damage occurred a lot in low hilly mountain and undulating slope. In addition, the accessibility to road and residential area from OB-infected region was less than 300 m in large part. Overall, it was figured out that artificial effect is stronger than natural effect with regard to the spread of pine wilt disease.

• Journal of Life Science
• /
• v.11 no.2
• /
• pp.159-165
• /
• 2001

In order to reserve abundant germplasm for breeding new corn varieties, major characteristics of ears and kernels were evaluated with a total of 210 Korean indigenous maize lines collected from various parts of Pusan City and Kynugnam Province, Korea The average ear length and ear diameter of indigenous maize lines collected was 12.52cm and 3.33 cm, respectively. The average ear weight of the maize lines was 63.70g. The ears collected from the north-west mountainous region were the heaviest, and The ears from the south coastal region were the lightest. The average kernel weight per ear was 50.54g, and the kernel weight per ear by region showed a tendency similar to the ear weight. The kernels of maize lines collected in the north-west mountainous region were the longest, and kernel width and thickness were the largest in the west plain region. 100 kernel weight and embryo weight the largest in the lines collected in the north-west mountainous region. The degree of pericarp thickness was the smallest in the lines collected in the south coastal region, and largest in the lines collected in the west plain region. Except for the correlation coefficient width and 100 kernel weight, all correlation coefficients between the characteristics of the lines showed highly significant differences.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.6
• /
• pp.50-59
• /
• 2022

The design of the substrate significantly affects the thermal history and the residual stress formation in the vicinity of a repaired region by a directed energy deposition (DED) process. The occurrence of defects in the repaired region depends on the thermal history and residual stress formation. The objective of this study was to investigate the influence of the inclined angle and depth of the substrate on the thermal and residual stress characteristics in the vicinity of a repaired region by a DED process through two-dimensional finite element analyses (FEAs). The temperature and residual stress distributions in the vicinity of the repaired region were predicted according to the combination of the inclined angle and depth of the substrate. The effects of the inclined angle and depth on the depth of the heat affected zone and the maximum value of the residual stress were examined. A proper combination of the inclined angle and depth of the substrate was estimated to decrease the residual stress in the vicinity of the repaired region.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.329-334
• /
• 2003

Design of pre-compression region(trapping region) of the valve plate is an important element to minimize the pressure fluctuation in a cylinder and in discharge process, and pump noise. In this study, we tried to prove what the characteristics of the oil hydraulic pump would be according to the angle of the trapping region. Three kinds of asymmetrical valve plates were used. As a result, we found that by designing the trapping region, the slope of the pressure rise in the cylinder port from low-pressure suction region to high-pressure discharge region is relaxed and the pressure fluctuation width and the discharge pressure pulsation are reduced. Therefore, because the pump gets smooth pressure fluctuation and low fluid Impact, the pump noise is reduce.

• Nuclear Engineering and Technology
• /
• v.46 no.2
• /
• pp.195-206
• /
• 2014

Heat transfer characteristics in a narrow rectangular channel are experimentally investigated for upward and downward flows. The experimental data obtained are compared with existing data and predictions by many correlations. Based on the observations, there are differences from others: (1) there are no different heat transfer characteristics between upward and downward flows, (2) most of the existing correlations under-estimate heat transfer characteristics, and (3) existing correlations do not predict the high heat transfer in the entrance region for a wide range of Re. In addition, there are a few heat transfer correlations applicable to narrow rectangular channels. Therefore, a new set of correlations is proposed with and without consideration of the entrance region. Without consideration of the entrance region, heat transfer characteristics are expressed as a function of Re and Pr for turbulent flows, and as a function of Gz for laminar flows. The correlation proposed for turbulent and laminar flows has errors of ${\pm}18.25$ and ${\pm}13.62%$, respectively. With consideration of the entrance region, the heat transfer characteristics are expressed as a function of Re, Pr, and $z^*$ for both laminar and turbulent flows. The correlation for turbulent and laminar flows has errors of ${\pm}19.5$ and ${\pm}22.0%$, respectively.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.2
• /
• pp.175-182
• /
• 1990

In order to investigate the conduction characteistics of the biaxially oriented polypropylene film, several measurements have been carried out in the range of temperature between 5['c] and 25['c] as well as the field intensity between 10[MV/m] and 300[MV/m]. The whole range of the characteristics observed at 15['c] appears to be divided into five regions` the Ohmic conduction region due to ionic carrier below 40[MV/m], the region from 40[MV/m] to 70[MV/m] in which the conduction mechanism is attributed to Poole-Frenkel effect, the region from 70[MV/m] to 82[MV/m] in which the negative resistance characteristics are observed, then the region from 82[MV/m] which is dominated by Schottky effect and finally, the region from 240[MV/m] up to the point where dielectric breakdown occurs in which the mechanism is based on Flowler-Nordheim theory.