• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.293-296
• /
• 1990

In this work, we reviewed AC break-down voltage characteristics in $SF_6$ Gas with spacer under nonuniform field, using the electrode construction of model spacer and simple protrusion. We cleared that breakdown voltage and surface flashover strongly depend on the position of spacer's insert.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.793-803
• /
• 2021

The small PWR has been paid more and more attention due to its diversity of application and flexibility in the site selection. However, the large core power density, the small containment space and the rapid accident progress characteristics make it difficult to control the containment pressure like the traditional PWR during the LOCA. The pressure suppression system has been used by the BWR since the early design, which is a suitable technique that can be applied to the small PWR. Since the configuration and operating conditions are different from the BWR, the pressure suppression system should be redesigned for the small PWR. Conducting the experiments on the scale down test facility is a good choice to reproduce the prototypical phenomena in the test facility, which is both economical and reasonable. A systematic scaling method referring to the H2TS method was proposed to determine the geometrical and thermohydraulic parameters of the pressure suppression containment response test facility for the small PWR conceptual design. The containment and the pressure suppression system related thermohydraulic phenomena were analyzed with top-down and bottom-up scaling methods. A set of the scaling criteria were obtained, through which the main parameters of the test facility can be determined.

• 한국정보전자통신기술학회논문지
• /
• 제7권1호
• /
• pp.20-25
• /
• 2014

차세대 친환경 조명인 LED소자는 온도가 올라갈수록 LED의 발광효율이 떨어지고 $80^{\circ}C$이상 올라갈수록 수명이 감소하고 스펙트럼선의 파장이 본래의 파장보다 장파장 쪽으로 이동하는 Red Shift현상 및 $T_j$ 상승에 따라 광 출력이 감소되는 큰 문제점이 대두되고 있어 열을 최소화 할 수 있는 방열설계 연구가 진행 중이다. COB Type LED의 경우 보드에 LED 칩을 직접 결합시켜 열 저항을 낮췄지만 주거용 13.5W의 경우 방열판을 통해 발열 문제를 해결해야한다. 본 논문에서는 주거용 13.5W COB LED 다운라이트에 맞게 Heat Sink를 설계하고, 그 설계한 Heat Sink와 13.5W COB를 패키징하여 Solidworks flow simulation을 통해 최적의 Fin두께를 선정하여 접촉식 온도계를 사용한 열적 특성을 분석 하고 평가 하였다.

• 한국전자통신학회논문지
• /
• 제9권5호
• /
• pp.561-566
• /
• 2014

발광 반도체칩을 주재료로 하는 LED의 열 문제를 해결하기 위해 1개의 보드에 밀집형으로 배열한 COB(Chip on Board)에 관한 관심이 증가하고 있다. 고출력 COB LED의 경우, 소비전력이 높아 발생되는 열을 해결하기 위한 방열이 필수적이며 소자의 온도가 상승하면 효율적인 광 방출을 저해하게 되며 열적 스트레스에 따라 소자의 수명이 급격히 저하된다. 이러한 열적인 문제점을 해결하기 위해 본 논문에서는 13.5W급 COB LED와 형상이 다른 4 개의 방열판을 패키징하여 Solidworks Flow Simulation을 통한 열적 특성을 분석한 후, 가장 우수한 특성을 가진 방열판 형상을 실물로 제작하여 13.5W급 COB LED 다운라이트 소자와 결합시킨 다음, $1m^3$ 공간에서 접촉식 온도계와 비접촉식 온도계를 사용하여 LED 소자와 방열판 간의 열적 특성을 실물 실험을 통하여 분석 평가하였다.

• 한국콘텐츠학회논문지
• /
• 제10권3호
• /
• pp.44-52
• /
• 2010

인터넷에서 가장 많이 사용하고 있는 월드 와이드 웹(world wide web) 트래픽은 트랜스포트 계층 프로토콜로 TCP를 사용하고 있다. TCP는 단일 경로를 사용하므로 경로상의 링크가 다운(down)된 후 다시업(up)될 때까지의 시간동안 통신할 수 없다. 이에 비해 SCTP는 다중 경로를 사용하므로 1차 경로가 다운되어도 대체 경로를 이용하여 통신이 가능하다. TCP와 SCTP의 성능을 비교하는 기존 연구들은 주로 파일 전송을 사용하여 수행되었고, 링크다운 환경에서 웹 트래픽을 다룬 연구는 없었다. 자기-유사성의 특징을 갖는 웹 트래픽은 웹 파일의 크기에 영향을 주는 파레토 분포의 형태(shape) 파라미터와 평균 도착 시간간격에 의해 특징지어지므로 이 두 개의 파라미터에 따른 성능 비교가 필요하다. 따라서 본 연구에서는 링크다운 환경에서 웹 트래픽의 특성을 반영하는 두 개의 파라미터를 변화시키면서 TCP와 SCTP의 처리율을 비교하였다. NS-2 시뮬레이션을 사용한 웹 트래픽의 실험 결과는 멀티호밍을 사용한 SCTP의 처리율이 TCP의 처리율보다 우수함을 보여주었다. 특히 웹 트래픽의 특성과 관련해서는 TCP가 SCTP에 비해 평균 도착시간 간격과 형태 파라미터에 더 많은 영향을 받았다. 이 연구의 결과는 링크의 다운기간에 따른 웹 트래픽의 성능변화를 예측하는 데 이용될 수 있다.

• 복식
• /
• 제34권
• /
• pp.67-78
• /
• 1997

We executed the wearing test in order to revise the basic Beosun pattern for five kinds of foot type. And we took sensory test to evaluated that revisions. The result were as follows: 1. The characteristics of slender foot is that the foot circumference III is short as compared with foot length. So Kou of basic Beosun is sharp-pointed Hoimok and beosunmok are broad. For slender foot we took down ou of Beosun and use foot cir-cumference III/2-1.5cm as Hoimok like the part shown in dotted line of Fin 6. 2. The characteristics of broad foot is that the foot circumference III is long as comparison with foot length. So Kou of ba-sic Beosun is stubby Hoimok and Beosunmok are narrow. For broad foot we took up Kou of Beosun put foot circum-ferenceI /2-1.5cm for the width of Apbol and circumfernce III 2/-1.5cm for Hoimok like the part shown in dotted line of Fig. 8. 3. because the arch of flat foot is flat the sole of basic Beosun is not suitable to the flat foot. It developes on wrinkles of Duichuk and sole. For flat foot we took down Hom of the basic Beousun like the part shown in dotted line of Fig. 10. 4 We evaluated the revisions of basic Beousun for foot types were useful in senso-ry test.

• Journal of the Korean Wood Science and Technology
• /
• 제32권3호
• /
• pp.15-24
• /
• 2004

The present work was undertaken to investigate the anatomical and chemical characteristics of transgenic poplar down-regulated with antisense OMT gene. Also the distribution of lignin in transgenic poplar trees was investigated at cellular level. No visible abnormal phenotype was observed in the fibers and vessel elements of transgenic poplar. Any marked differences in the staining intensities of Wiesner and Mäule color reaction were not identified in the transgenic poplar. TEM micrographs did not show any staining intensities in the cell walls stained with KMnO₄. Interestingly, the UV spectroscopy of semi-thin sections exhibited a distinct decrease of lignin absorption at 280 nm in the vessel walls, indicating transgenic poplar wood with lower amount of guaiacyl lignin in vessel elements. Chemical composition of antisense OMT poplar was almost identical to that of wild-type poplar. Klason lignin content of transgenic poplar did not show any significant difference from that of the controls. The solid state NMR spectra revealed the transgenic poplar with only slightly more syringyl lignin than the control. The present work showed that antisense OMT gene constructed in the poplar was not enough to reduce the overall content of Klason lignin, and suggested that the expression of transformation was confined to vessel walls.

• 한국전산유체공학회지
• /
• 제18권1호
• /
• pp.1-6
• /
• 2013

Missile and fighter aircraft have been challenged by low restoring nose-down pitching moment at high angle of attach. The consequence of weak nose-down pitching moment can be resulting in a deep stall condition. Especially, the pressure oscillation has a huge effect on noise generation, structure damage, aerodynamic performance and safety, because the flow has strong unsteadiness at high angle of attack. In this paper, the unsteady aerodynamics coefficients were analyzed at high angle of attack up to 50 degrees around two dimensional NACA0012 airfoil. The two dimensional unsteady compressible Navier-Stokes equation with a LES turbulent model was calculated by OHOC (Optimized High-Order Compact) scheme. The flow conditions are Mach number of 0.3 and Reynolds number of $10^5$. The lift, drag, pressure, entropy distribution, etc. are analyzed according to the angle of attack. The results of average lift coefficients are compared with other results according to the angle of attack. From a certain high angle of attack, the strong vortex formed by the leading edge are flowing downstream as like Karman vortex around a circular cylinder. The primary and secondary oscillating frequencies are analyzed by the effects of these unsteady aerodynamic characteristics.

• 설비공학논문집
• /
• 제13권11호
• /
• pp.1089-1096
• /
• 2001

The cool-down performance after soaking is very important in an automotive air-conditioning system and is considered as the key design variable. Therefore, understanding of the overall transient characteristics of the system is essential to the preliminary design as well as steady-state characteristics. The objective of this study is to develop a computer simulation model and estimate theoretical1y the transient performance of an automotive air-conditioning system. To accomplish this, a mathematical modelling of each component, such as compressor, condenser, expansion valve, and evaporator, is presented first of all. For a detailed calculation, condenser and evaporator are divided into many subsections. Each sub-section is an elemental volume for modelling. In models of expansion valve and compressor, dynamic behaviors are not considered in an attempt to simplify the ana1ysis, but the quasi-static ones are just considered, such as the relation between mass flow rate and pressure drop in expansion device, polytropic process in compressor, etc. The developed simulation model is validated with a comparison to laboratory test data of an automotive air-conditioning system. The overall time-tracing properties of each component agreed fairly well wish those of test data in this case.

• 상하수도학회지
• /
• 제20권1호
• /
• pp.147-155
• /
• 2006

For the further study of the solids flux theory, several researchers have proposed models to predict sludge settling velocity for each different concentration by using sludge indexes, SVI, SSVI and $SSVI_{3.5}$. It is difficult to apply the above models to predict sludge-water interface height in a batch column because sludge settling velocity changes while sludge settle down. While sludge settle down in a batch column, sludge concentration becomes high. The sludge concentration change is one of the most critical causes of the change of sludge settling velocity. Also, sludge concentration change causes of sludge index to change. SVI is more sensitive than SSVI or $SSVI_{3.5}$ to the change of sludge concentration. Each sludge has physical characteristics of its own which makes the settling velocity for each sludge different. The purpose of this study is to establish the correction factors that are able to compensate the errors derived from each different sludge settling characteristic by using sludge indexes, therefore the correction factors are applicable to the model for the change of sludge-water interface height.