• 치위생과학회지
• /
• 제9권4호
• /
• pp.453-459
• /
• 2009

본 연구는 치과병원에서 발생하는 진료시(스케일링, 치아절삭) 및 비진료시(기기만 가동) 가동되는 치료기기의 소음이 치과위생사들에게 미치는 영향 정도를 파악하기 위하여 NR 평가방법으로 분석하였으며 치과위생사의 기기소음에 대한 반응을 설문조사를 통하여 조사하였다. 그 결과는 다음과 같다. 1. 치과병원 기기의 진료 시 및 비진료 시의 주파수 특성의 경우 고주파로 갈수록 소음도가 높게 나타났으며 발생소음도의 대부분이 고주파 성분(4 KHz이상)에 의하여 영향을 받고 있으며 발생하는 소음레벨 dB(A)의 범위는 67.7~78.3 dB(A)로 치과위생사의 소음피해가 예상되는 수준으로 소음 영향을 최소화하기 위한 대책이 시급하다고 사료된다. 2. 치과병원에서 발생하는 소음에 대한 반응을 조사한 결과 응답자의 57.8%가 "왠지 불안하게 된다"라고 응답하였으며 치과위생사 경력이 5년 이하이고 30세 이하인 경우에는 "왠지 불안하게 된다", 경력이 5년 이상이고 31세 이상인 경우에는 "아무렇지도 않다"라고 응답한 비율이 높게 나타난 것으로 조사되었다(p<0.05, p<0.01). 이는 발생소음레벨이 소음이 인체에 미치는 영향에서 "청력손실의 발생 시작" 수준으로 경력과 연령이 많을수록 그만 큼 소음에 만성적으로 노출된 결과로 판단된다. 3. NR곡선에 의한 평가 결과 스케일링 치료를 할 경우 NR-78, 치아 삭제 시 NR-77, 기기만 가동 되는 경우 NR-67로 나타나 작업장의 소음기준을 훨씬 초과하는 수준임을 알 수 있었다. 특히, 스케일링 치료시 소음피해를 최소화하기 위해서 4 kHz이상의 고주파대역을 제어할 수 있는 방음대책을 수립하여 치과 위생사에게 미치는 소음에 대한 영향을 줄일 필요가 있는 것으로 판단된다. 4. 소음으로 인하여 발생되는 제반 문제와 병원환경만족 등의 변수에 대한 상관관계 분석결과 기기에서 발생하는 소음으로 인하여 기분이 거슬리게 되면 환자에게 진료결과를 충분히 설명하지 못하는 경우의 상관계수가 0.677로 유의미한 정적 상관관계(p<0.01), 치과위생사의 "병원환경만족도"와 "환자들로부터 기기소음에 대한 불평을 듣는" 항목에서 -0.595, "기기발생 소음으로 피곤을 느낀다" 항목에서 -0.343으로 유의미한 부정적 상관관계(p<0.01)를 보이고 있었다. 5. 소음에 노출되어 기분 거슬림이나 피곤을 느끼게 되면 진료결과를 충분히 설명하지 못하게 되고 병원이 소란할수록 병원환경만족도가 낮은 것으로 조사되어 치과병원의 기기소음에 대한 적절한 대책 수립이 필요하며 이를 통하여 치과종사자의 쾌적한 근무여건을 제공, 치과병원의 경쟁력 제고 측면에서 긍정적인 영향을 미칠 것으로 판단된다 치과 병원 기기에서 발생하는 소음이 치과위생사들에게 미치는 영향정도를 파악하고자 소음특성을 측정 및 설문 조사를 통하여 분석한 결과 기기발생 소음특성이 치과위생사에게 기분이 거슬리거나 피로를 느끼게 하는 수준이며 이로 인하여 환자들에게 진료결과를 충분히 설명하려는데 지장을 받고 있으며 병원이 시끄럽다고 느낄수록 병원환경만족도가 낮은 것으로 조사되었다. 치과위생사에 대한 적절한 방음대책(방음보호구 제공, 저소음 저진동 장비의 선택, 마스킹 효과 등)을 수립하여 쾌적한 근무여건을 제공하므로써 치과위생사들의 병원환경 만족도를 향상시켜 치과의료 서비스의 질 및 경쟁력 향상이 가능할 것으로 사료된다.

• Ultrasonography
• /
• 제32권1호
• /
• pp.59-65
• /
• 2013

목적: 본 연구는 초음파 조영제를 직접 합성하고 그 크기 및 소멸 시간 등의 특성을 분석하며, 기존의 초음파 조영제와의 영상을 비교하여 앞으로 초음파 조영제를 매개로 한 영상 유도 하 약물 및 유전자 치료제의 전달 시스템 구축의 기본을 갖추고자 한다. 대상 및 방법: 초음파 조영제는 21마이크로 몰의 DPPC(1, 2-Dihexadecanoyl-sn-glycero-3-phosphocholine, $C_{40}H_{80}NO_8P$), 9 마이크로 몰의 콜레스테롤, 1.9 마이크로 몰의 DCP(Dihexadecylphosphate, $[CH_3(CH_2)_{15}O]_2P(O)OH$) 및 클로로포름 및 SF6 기체를 이용하여 합성하였다. 약 12-24시간의 동결건조 후에 초음파 조영제는 SF6 기체와 초음파 처리(sonication) 법을 이용하여 합성하였고 그 초음파 조영제의 크기는 압출기를 이용하여 일정한 크기로 조정하였다. 합성된 초음파 조영제는 동적 광산란 측정법(dynamic light scattering measurement)을 이용하여 그 크기를 분석하였다. 한편 합성한 초음파 조영제의 소멸 양상을 평가하기 위하여 광학 현미경을 이용하여 그 숫자를 합성 직후, 12시간, 24시간, 36시간, 48시간, 60시간, 72시간 및 84시간 후에 평가하였다. 초음파 조영제로서의 효과를 평가하기 위하여 모형을 만들어 현재 임상적으로 사용되고 있는 초음파 조영제와 그 에코를 비교 분석하였다. 결과: 초음파 조영제는 동결건조-초음파 처리 방법을 통하여 성공적으로 합성 할 수 있었다. 합성된 초음파 조영제는 154.2 nm의 정점 (peak)에서 가장 많이 분포하였으며 합성 후 24시간부터는 입자의 숫자들이 감소하는 양상을 보였다. 소노뷰와 합성된 초음파 조영제의 에코밝기는 유의한 차이를 보이지 않았으나 소노뷰와 생리식염수 및 합성된 초음파 조영제와 생리식염수의 에코 밝기는 통계적으로 유의한 차이를 보였다 (p < 0.01). 결론: 본 연구를 통하여 초음파 조영제를 직접 합성할 수 있는 방법을 습득할 수 있었고 그 크기 및 특성을 분석할 수 있었다.

• 한국해양학회지:바다
• /
• 제15권3호
• /
• pp.140-147
• /
• 2010

한국 남해에서 분리한 유해조류 Chattonella ovata의 성장에 미치는 수온과 염분 및 광량의 영향을 조사하였다. C. ovata는 $10{\sim}30\;^{\circ}C$의 수온과 7.5~40 psu의 염분조합 중 $10^{\circ}C$의 모든 염분조합과 $15^{\circ}C$의 7.5 psu와 10 psu, 그리고 $20^{\circ}C$와 $30^{\circ}C$의 7.5 psu를 제외한 모든 조합에서 성장하였다. 최대 성장속도는 $30^{\circ}C$, 30 psu 조합에서 $0.62\;day^{-1}$로 관찰되었다. 이원배치 분산분석(two-way ANOVA) 결과로부터 그들의 성장속도는 수온에 크게 의존할 뿐 염분과 교호작용의 영향은 미약하였다. 이와 같은 결과는 C. ovata가 고수온을 선호하는 광염성종임을 지시하였다. C. ovata는 $30\;{\mu}mol$ photons $m^{-2}s^{-1}$ 이하의 광량에서는 성장이 이루어지지 않았고, 본 연구에서 제공한 최대 광량인 $800\;{\mu}mol$ photons $m^{-2}s^{-1}$서 광 저해현상은 보이지 않았다. 광 조건에 의해 유도된 성장식 $\mu$=0.74(I-16.0)/(I+43.9)으로부터 성장에 대한 반포화광량($K_s$)은 $75.9\;{\mu}mol$ photons $m^{-2}s^{-1}$, 절대광량($I_c$)은 $16.0\;{\mu}mol$ photons $m^{-2}s^{-1}$로 나타났으며, 특히 $K_s$는 규조류인 Skeletonema costatum을 비롯한 다른 여러 편모조류보다 낮았다. 이상의 결과로부터 C. ovata는 하계 한국 내만과 연안해역에서 종간경쟁에 유리한 생리특성을 가진 종으로 판단되었다.

• 한국농공학회지
• /
• 제19권1호
• /
• pp.4296-4311
• /
• 1977

This study was conducted to derive an Instantaneous Unit Hydrograph for the accurate and reliable unitgraph which can be used to the estimation and control of flood for the development of agricultural water resources and rational design of hydraulic structures. Eight small watersheds were selected as studying basins from Han, Geum, Nakdong, Yeongsan and Inchon River systems which may be considered as a main river systems in Korea. The area of small watersheds are within the range of 85 to 470$\textrm{km}^2$. It is to derive an accurate Instantaneous Unit Hydrograph under the condition of having a short duration of heavy rain and uniform rainfall intensity with the basic and reliable data of rainfall records, pluviographs, records of river stages and of the main river systems mentioned above. Investigation was carried out for the relations between measurable unitgraph and watershed characteristics such as watershed area, A, river length L, and centroid distance of the watershed area, Lca. Especially, this study laid emphasis on the derivation and application of Instantaneous Unit Hydrograph (IUH) by applying Nash's conceptual model and by using an electronic computer. I U H by Nash's conceptual model and I U H by flood routing which can be applied to the ungaged small watersheds were derived and compared with each other to the observed unitgraph. 1 U H for each small watersheds can be solved by using an electronic computer. The results summarized for these studies are as follows; 1. Distribution of uniform rainfall intensity appears in the analysis for the temporal rainfall pattern of selected heavy rainfall event. 2. Mean value of recession constants, Kl, is 0.931 in all watersheds observed. 3. Time to peak discharge, Tp, occurs at the position of 0.02 Tb, base length of hlrdrograph with an indication of lower value than that in larger watersheds. 4. Peak discharge, Qp, in relation to the watershed area, A, and effective rainfall, R, is found to be {{{{ { Q}_{ p} = { 0.895} over { { A}^{0.145 } } }}}} AR having high significance of correlation coefficient, 0.927, between peak discharge, Qp, and effective rainfall, R. Design chart for the peak discharge (refer to Fig. 15) with watershed area and effective rainfall was established by the author. 5. The mean slopes of main streams within the range of 1.46 meters per kilometer to 13.6 meter per kilometer. These indicate higher slopes in the small watersheds than those in larger watersheds. Lengths of main streams are within the range of 9.4 kilometer to 41.75 kilometer, which can be regarded as a short distance. It is remarkable thing that the time of flood concentration was more rapid in the small watersheds than that in the other larger watersheds. 6. Length of main stream, L, in relation to the watershed area, A, is found to be L=2.044A0.48 having a high significance of correlation coefficient, 0.968. 7. Watershed lag, Lg, in hrs in relation to the watershed area, A, and length of main stream, L, was derived as Lg=3.228 A0.904 L-1.293 with a high significance. On the other hand, It was found that watershed lag, Lg, could also be expressed as {{{{Lg=0.247 { ( { LLca} over { SQRT { S} } )}^{ 0.604} }}}} in connection with the product of main stream length and the centroid length of the basin of the watershed area, LLca which could be expressed as a measure of the shape and the size of the watershed with the slopes except watershed area, A. But the latter showed a lower correlation than that of the former in the significance test. Therefore, it can be concluded that watershed lag, Lg, is more closely related with the such watersheds characteristics as watershed area and length of main stream in the small watersheds. Empirical formula for the peak discharge per unit area, qp, ㎥/sec/$\textrm{km}^2$, was derived as qp=10-0.389-0.0424Lg with a high significance, r=0.91. This indicates that the peak discharge per unit area of the unitgraph is in inverse proportion to the watershed lag time. 8. The base length of the unitgraph, Tb, in connection with the watershed lag, Lg, was extra.essed as {{{{ { T}_{ b} =1.14+0.564( { Lg} over {24 } )}}}} which has defined with a high significance. 9. For the derivation of IUH by applying linear conceptual model, the storage constant, K, with the length of main stream, L, and slopes, S, was adopted as {{{{K=0.1197( {L } over { SQRT {S } } )}}}} with a highly significant correlation coefficient, 0.90. Gamma function argument, N, derived with such watershed characteristics as watershed area, A, river length, L, centroid distance of the basin of the watershed area, Lca, and slopes, S, was found to be N=49.2 A1.481L-2.202 Lca-1.297 S-0.112 with a high significance having the F value, 4.83, through analysis of variance. 10. According to the linear conceptual model, Formular established in relation to the time distribution, Peak discharge and time to peak discharge for instantaneous Unit Hydrograph when unit effective rainfall of unitgraph and dimension of watershed area are applied as 10mm, and $\textrm{km}^2$ respectively are as follows; Time distribution of IUH {{{{u(0, t)= { 2.78A} over {K GAMMA (N) } { e}^{-t/k } { (t.K)}^{N-1 } }}}} (㎥/sec) Peak discharge of IUH {{{{ {u(0, t) }_{max } = { 2.78A} over {K GAMMA (N) } { e}^{-(N-1) } { (N-1)}^{N-1 } }}}} (㎥/sec) Time to peak discharge of IUH tp=(N-1)K (hrs) 11. Through mathematical analysis in the recession curve of Hydrograph, It was confirmed that empirical formula of Gamma function argument, N, had connection with recession constant, Kl, peak discharge, QP, and time to peak discharge, tp, as {{{{{ K'} over { { t}_{ p} } = { 1} over {N-1 } - { ln { t} over { { t}_{p } } } over {ln { Q} over { { Q}_{p } } } }}}} where {{{{K'= { 1} over { { lnK}_{1 } } }}}} 12. Linking the two, empirical formulars for storage constant, K, and Gamma function argument, N, into closer relations with each other, derivation of unit hydrograph for the ungaged small watersheds can be established by having formulars for the time distribution and peak discharge of IUH as follows. Time distribution of IUH u(0, t)=23.2 A L-1S1/2 F(N, K, t) (㎥/sec) where {{{{F(N, K, t)= { { e}^{-t/k } { (t/K)}^{N-1 } } over { GAMMA (N) } }}}} Peak discharge of IUH) u(0, t)max=23.2 A L-1S1/2 F(N) (㎥/sec) where {{{{F(N)= { { e}^{-(N-1) } { (N-1)}^{N-1 } } over { GAMMA (N) } }}}} 13. The base length of the Time-Area Diagram for the IUH was given by {{{{C=0.778 { ( { LLca} over { SQRT { S} } )}^{0.423 } }}}} with correlation coefficient, 0.85, which has an indication of the relations to the length of main stream, L, centroid distance of the basin of the watershed area, Lca, and slopes, S. 14. Relative errors in the peak discharge of the IUH by using linear conceptual model and IUH by routing showed to be 2.5 and 16.9 percent respectively to the peak of observed unitgraph. Therefore, it confirmed that the accuracy of IUH using linear conceptual model was approaching more closely to the observed unitgraph than that of the flood routing in the small watersheds.

• Radiation Oncology Journal
• /
• 제18권2호
• /
• pp.92-100
• /
• 2000

목적 :본 연구의 목적은 뇌 생식 세포종 환자들의 방사선치료 시 가장 적절한 조사 영역을 알아보고자 시행하였다. 대상 및 방법 : 1993년부터 1998년까지 뇌 생식세포종으로 진단되거나 또는 추정되어 감마 나이프를 시행 받은 환자 19 명을 대상으로 분석하였다. 송과선 9예, 안상(suprasellar) 1예, 그 외 2군데 이상 다발성 병소가 9예였다. 조직이 확인이 된 예는 7예이었고 배아종(germ ceil tumor)이 5명, 내배엽동종(endodermal sinus tumor)이 2명이었다. 종양의 부피는 2.4 cm$^{3}$부터 74 cm$^{3}$ 까지 이었다. 감마나이프 방사선 치료는 50% 등선량 곡선을 중심으로 10 Gy부터 20 Gy에 걸쳐 조사되었다. 추적 기간은 10개월에서부터 54개월까지였다. 결과 : 총 19명 중 14명(74%)에서 재발을 하였다. 완전 관해와 부분 관해는 각각 2명(11%), 10명(53%)이었다. 무반응은 7명(36%)이었다. 원발 병소가 있었던 자리에서 재발한 경우가 2예, 치료 조사영역을 벗어났으나 원발 병소와 연결되어서 그 주위로 재발한 경우가 6예 이었다. 원발 병소와 떨어져서 뇌실 재발이 된 경우 3예, 척수 전이가 된 경우가 4예 이었다. 종양의 부피가 20 cm$^{3}$ 이하인 경우는 8예이었으며 이중 2예는 치료 조사영역 내에서만 재발한 경우, 4예는 원발 병소와 연이어져서 치료 부위 주위로 재발한 경우, 1예는 척수 전이된 경우이었다. 종양의 부피가 20 cm$^{3}$ 보다 큰 경우는 6예 이었으며 그 중 원발 병소와 연이어져서 치료 부위 주위에 재발한 경우 1예, 원발 병소와 떨어져서 뇌실 전이가 된 경우가 2예, 척수 전이를 일으킨 경우가 3예였다. 재발을 하지 않은 5예는 종양의 부피가 20 cm$^{3}$ 이하인 경우이고 모두 단일 병소이며 종양기표가 모두 정상이었다. 척수 전이는 4예(21%)에서 발생하였으며 모두 뇌실 침범이 있는 경우에 발생하였다. 총 9명의 다발성 병소 중 국소 재발만을 한 경우는 3경우이었고 나머지는 모두 치료 조사영역을 벗어나 원발 병소와 떨어져서 재발하였다. 결론 : 감마 나이프 치료가 뇌 생식세포종에 대한 치료로서는 부적절한 치료이며 이것은 감마 나이프의 특성인 작은 치료 용적과 조사 선량의 부적절함에서 기인하는 것으로 판단된다. 뇌 생식 세포종에서 병소 부위 만을 치료하는 경은 종양의 부피와 다발성 병소의 뇌실 침범 유무가 치료 성공의 열쇠이다. 20 cm$^{3}$ 이하, 단일 병소, 뇌실 침범이 혀는 경우, 정상적인 종양지표, 등이 가장 이상적인 적응증이 될 수 있다. 다발성 병소에서 뇌실 침범이나 뇌실 병소가 있을 경우는 예방적 뇌 척수 조사를 고려해야 할 것으로 생각된다. 병소의 크기가 cm$^{3}$ 보다 클 경우 다발성 병소인 경우, 종양지표의 증가가 있는 경우에는 확정적인 제안을 하기는 어렵지만 전 뇌실 조사 또는 부분방사선 조사가 시도될 수 있을 것으로 생각되며 이 경우가 선행 화학 요법과 함께 치료할 수 있는 대상이며, 앞으로 이 부분에 대한 연구가 계속 이루어질 것으로 생각된다.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• 광물과 암석
• /
• 제34권1호
• /
• pp.41-56
• /
• 2021

① 미세균열의 길이(N=230), ② 미세균열의 간격(N=150) 및 ③ 압열인장강도(N=30)를 이용하여 쥬라기의 합천화강암에서 발달된 여섯 결(R1~H2)의 특성을 분석하였다. 여섯 결에 평행한 방향으로 측정한 이들 세 인자에 대한 18개의 누적그래프를 상호 대비하였다. 분석한 주요 결과를 요약하면 다음과 같다. 첫째, 9개 계급구간으로 구분한 압열인장강도값(kg/㎠)의 분포율(%)은 60~70(3.3) < 140~150(6.7) < 100~110·110~120(10.0) < 90~100(13.3) < 80~90(16.7) < 120~130·130~140(20.0)의 순으로 증가한다. 각 계급구간의 빈도수에 따른 강도의 분포곡선은 이봉 분포를 보여 준다. 둘째, 길이, 간격 및 인장강도에 대한 그래프를 H2 < H1 < G2 < G1 < R2 < R1의 순으로 배열하였다. 간격과 길이에 대한 두 그래프 사이의 지수차(λS-λL, Δλ)는 H2(-1.59) < H1(-0.02) < G2(0.25) < G1(0.63) < R2(1.59) < R1(1.96)(2 < 1)의 순으로 증가한다. 관련 도면으로부터, 상기한 지수차의 증가와 함께 인장강도에 대한 여섯 그래프는 점차 좌측 방향으로 이동한다. 조직의 균일도를 지시하는 인장강도에 대한 그래프의 음의 기울기(a)는 3번 결((H1+H2)/2, 0.116) < 2번 결((G1+G2)/2, 0.125) < 1번 결((R1+R2)/2, 0.191)의 순으로 증가한다. 셋째, 각 결(R1·R2(1번 결), G1·G2(2번 결), H1·H2(3번 결))을 구성하는 두 방향에 대한 그래프 사이의 배열순을 비교하였다. 길이와 간격에 대한 두 그래프의 배열순은 상호 역순이다. 간격과 인장강도에 대한 두 그래프는 배열순에서 서로 일관성이 있다. 길이와 간격에 대한 지수차(ΔλL 및 ΔλS)는 1번 결(R, -0.08) < 2번 결(G, 0.14) < 3번 결(H, 0.75) 및 3번 결(H, 0.16) < 2번 결(G, 0.23) < 1번 결(R, 0.45)의 순으로 각각 증가한다. 넷째, 미세균열의 길이, 미세 균열의 간격 및 인장강도의 분포 특성을 보여 주는 여섯 그래프에 대한 종합도를 작성하였다. 길이의 범위에 따라, 여섯 그래프는 G2 < H2 < H1 < R2 < G1 < R1(<7 mm) 및 G2 < H1 < H2 < R2 < G1 < R1(≦2.38 mm)의 순을 보여 준다. 간격에 대한 여섯 그래프는 누적 빈도수 12 및 간격 0.53 mm에 해당하는 지점 부근에서 병목구간을 형성하여 서로 교차한다. 다섯째, 여섯 결을 대변하는 각 파라미터의 여섯 값을 증가 및 감소하는 순으로 배열하였다. 길이와 관련된 8개 파라미터 중에서, 총 길이(Lt) 및 그래프(≦2.38 mm)는 배열순에서 상호 부합한다. 간격과 관련된 7개 파라미터 중에서, 간격의 빈도수(N), 평균 간격(Sm) 및 그래프(≦5 mm)는 배열순에서 상호 일관성이 있다. 배열순의 측면에서, 간격에 대한 상기 세 파라미터의 값은 그룹 E에 속하는 최대인장강도와 일관성이 있다. 표 8에서와 같이, 이들 파라미터 값의 배열순은 여섯 결 및 세채석면에 대한 사전 인식에 유용하다.

• 여성건강간호학회지
• /
• 제7권2호
• /
• pp.212-228
• /
• 2001

This is a cross-sectional descriptive correlation study that aimed to understand the relationship between the level of sexual contacts during the dates and psycho-social factors in teenage girls who have or had boyfriends. The purpose of this study was to describe the relationship between sexual contacts and self-esteem and self- assertiveness. The subjects of the study were 6,130 teenage girls who have or had boyfriends. They were selected convienently 12,733 teenage girls from 254 secondary schools located in 7 large cities and 9 provinces in Korea. A structured questionaire was used it included items one general characteristics, the levels of sexual contacts, self-esteem and self-assertiveness. Seven levels of sexual contacts were rated they were holding a hand, putting arms around each other's shoulders, kiss, french kiss, touching breast, petting genitalia, and sexual intercourse during the dates. Self-esteem and self-assertiveness were measured by the "Self-esteem scale" of Rogenberg (1971) and the questionaires developed by S. B. Chang et al(2000), respectively. The self-reported questionaires were collected from October 2, to October 28, 2000 and analyzed by using SPSS 10.0 Program. The data were analyzed by descriptive statistics, reliability, One-way ANOVA with Duncan method & Scheffe method. The results of the analysis were as follows. 1.An average Percentage of the respondents who have (46.1%) or had (53.9%) boyfriends was 48.1% (n=6,130) and the most common sexual contact during the dates was french kiss (26.7%, n=1,634). While 7.5%(458) of respondents had a sexual intercourse, 13.7%(842) of respondents didn't have any sexual contact during the dates. 2. Distribution of starting point of the first sexual contact demonstrates that 1,950 respondents (31.8%) held partner's hand at the first date and 1,367 respondents (22.3%) put arms around each other's shoulders at the 2nd or 3rd date. Sexual contacts such as kiss, french kiss, touching breast, petting genitalia, or sexual intercourse were experienced mostly at the later than the 10th date. However, surprisingly large number(1.7%) of respondents had genital contact and sexual intercourses at the first date. 3. The means of self-esteem and self-assertiveness socres of the respondents who have or had boyfriends are 27.43$({\pm}4.03)$ and 17.96$({\pm}2.55)$, respectively. The range of scores for self esteem was 10-40, 40 with most self esteem. The range of scores for self assertiveness was 7-21, 21 with most self assertiveness. 4. As sexual contacts proceeded, the means of self-esteem and self-assertiveness values decreased. In detail, the respondents having no or light sexual contacts (kiss, putting arms around each other's shoulder, holding a hand) had similar self-esteem values($p{\leq}0.05$). However, ones having relatively intensive sexual contacts (french kiss, touching breast) showed significantly lower self-esteem values($p{\leq}0.05$). Same trend has been obtained for self-assertiveness value. 5. The higher values of self-esteem and self-assertiveness values the respondents had, the later they started the moderate sexual contact (kiss, french kiss) during the dates. Interestingly, among the respondents having intensive sexual contacts (petting genitalia, sexual intercourse) during the dates, those who experienced the such contacts at the first date or later than 10th date have higher self-esteem and self-assertiveness values than one experienced the such contacts during the 2nd$\sim$9th dates, giving U-shape curve. 6. There was a significant relationship between self-esteem and self-assertiveness in girls who have or had boyfriends($P{\leq}.001$). In conclusion, the research shows that self-esteem and self-assertiveness values are significantly related with the sexual contacts of the teenage girls who have or had boyfriends. These results strongly suggest that proper sex education program for teenage girls should contain the program on improving the self-esteem and self-assertiveness. We believe that sex education program is the one of the best ways to prevent the unwanted sexual contacts and pregnancy of teenage girls.

• 한국지반환경공학회 논문집
• /
• 제15권1호
• /
• pp.63-68
• /
• 2014

본 연구에서는 UV-A 조사를 통해 titanium dioxide($TiO_2$), hydroxyapatite(HAP)와 germanium(Ge)의 다양한 복합촉매를 통한 항생제(lincomycin, LM)의 광촉매 제거를 조사하였다. 우선, 다양한 복합촉매의 향상된 광촉매능을 비교하였고, 도출된 제거효율은 $TiO_2/HAP/Ge$ > $TiO_2/Ge$ > $TiO_2/HAP$ 순으로 관찰되었다. $TiO_2/HAP/Ge$의 조성은 반응표면법의 하나인 혼합물분석(mixture analysis)에 기초하여 통계적 방안이 수행되었다. 각 인자별 6개의 조건을 포함하도록 설정한 독립변수 $TiO_2(X_1)$, HAP($X_2$)와 Ge($X_3$)의 LM($Y_1$)과 TOC($Y_2$) 제거에 대한 영향을 살펴보았다. 분산분석(ANOVA)의 회귀분석항은 유의한 p값(p<0.05)과 높은 결정계수 값($R^2$ of $Y_1=99.28%$ and $R^2$ of $Y_2=98.91%$)을 나타냈다. 등고선도와 반응곡선을 통해 UV-A 조사조건에서 $TiO_2$/HAP/Ge 조성에 따른 LM의 제거를 나타냈다. TOC($Y_2$) 제거를 기준으로 도출된 최적조성비는 코드화 값으로 $X_1=0.6913$, $X_2=0.2313$과 $X_3=0.0756$으로 나타났다. 실제 적용에 따른 비교 실험 결과는 LM과 TOC의 평균제거율이 각각 99.2%와 49.3%로 나타나 모델의 예측과 잘 부합하였다.