• 한국농공학회지
• /
• 제40권1호
• /
• pp.49-56
• /
• 1998

Ths study was peformed to evaluate the degree of degradation and safety of a small agricultural reservoir, Kosam Reservoir, in Kyungki Province. Evaluation was done by the program developed by the authors. Results of the study are as follows: 1) Although many burrows were found in downstream side of embankment and cracks were found in wall joining spillway, it appeared that degree of degradation of embankment was in good conditions. 2) Compressive strengths of concrete of crest, side channel, chute floor of spillway were in poor condition. But it appeared that overall degree of degradation of structures was in medium condition based on the criteria of the evaluation system 3) From the analysis of slope stability, safety factor of downstream slope was over 3.3 for the worst condition, such as flood and high water level and that of upstream slope was also over 3.6 for rapid drawdown. In case of earthquake, safety factors were over 2.5 for all conditions. Therefore embankment slopes of Kosam Reservoir were very stable for normal and earthquake condition. 4) As upon assumed failure of embankment of Kosam Reservoir, degree of damage was estimated to be very serious because of many loss of life and properties in the downstream area. 5) Overall grade of safety of Kosam Reservoir was in good condition. Therefore safety was considered to be "No problems" at the present time but further degradation may be proceeded partly and continuously as time goes by.e goes by.

• 산경연구논집
• /
• 제10권7호
• /
• pp.7-16
• /
• 2019

Purpose - Economic globalization provides firms with a new channel to gain benefits from foreign countries. Therefore, using the real MNEs, this paper set China's firms as an example to explore the relationship between multinationality and performance. Research design, data, and methodology - Panel data from 2008 to 2017 was used and 390 multinational firms listed in China's A-share market was selected. Additionally, related econometric methods were employed to analyze the relationship between multinationality and performance in this study. The return on assets was treated as a dependent variable, and the sales of a firm, the firm age, the debt asset ratio of a firm, the ratio of foreign sales to total sales and the enterprise properties were treated as independent variables. All of these factors were used to conduct an empirical analysis. Results - The empirical findings in this study revealed that there is a linear relationship between multinationality and performance, as well as that non state-owned enterprises (non-SOEs) have a greater effect on the relationship between multinationality and performance than that of the state-owned enterprises (SOEs). Conclusions - On the basis of evidences this paper provided, China's government should take measures in the future to help China's firms when they fulfil international economic activities.

• 한국철도학회논문집
• /
• 제8권1호
• /
• pp.6-14
• /
• 2005

The mechanism of ballast-flying phenomena by strong wind induced by high-speed trains has extensively been investigated by conducting wind tunnel test and field-measuring of wind velocity in the vicinity of the track. The ballast gathered from the Seoul-Busan high-speed railway track has been classified by mass and shape to find relationship between those properties and the characteristic of movement in high wind and 16-channel Kiel-probe array has been used to examine the detailed flow structure above the surface of the track. The probability of ballast-flying during the passage of the high-speed train has been assessed comparing the results from wind tunnel test and that from field-measuring. The results shows that when the G7 train runs well as the KTX train runs at 300km/h, about 25m/s wind gust is induced just above the tie and the probability far small ballast under 50g to fly is about 50％ when it is on the tie. If the G7 train runs at 350km/h, the wind gust just above the tie increases to 30m/s, therefore radical countermeasure seems to be needed.

• 대한전자공학회논문지TC
• /
• 제40권6호
• /
• pp.225-236
• /
• 2003

본 논문에서는 인터넷 차별화 서비스 구조인 지연 비례 서비스를 무선 망 환경에서도 제공할 수 있는 WDPS(Wireless Delay Proportional Service) 스케줄링 알고리즘을 제안한다. WDPS는 무선 망의 버스트 하고 위치-종속적인 채널 에러 특성을 고려하여 현재까지 서비스 된 클래스간 지연 서비스 정도를 근거로 적응적으로 다음에 서비스할 클래스를 선택한다. 제안된 스케줄링 방법은 무선 망 에러로 생기는 클래스큐의 블록킹 문제를 해결하고, 클래스간 공정한 지연 서비스 품질을 제공하며 서비스 보상이 점진적으로 이루어져 하나의 클래스가 독점적으로 무선자원을 사용하지 못하도록 하였다. 모의 실험에서는 제안된 WDPS 스케줄링 방법을 사용하여 기존 인터넷 지연 차별화 서비스를 무선 망에서도 원하는 서비스 요구조건에 맞게 서비스 할 수 있음을 보였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권2호
• /
• pp.94-99
• /
• 2004

silicided 50-nm-gate-length n-type Schottky barrier metal-oxide-semiconductor field-effect-transistors (SB-MOSFETs) with 5 nm gate oxide thickness are manufactured. The saturation current is $120{\mu}A/{\mu}m$ and on/off-current ratio is higher than $10^5$ with low leakage current less than $10{\mu}A/{\mu}m$. Novel phenomena of this device are discussed. The increase of tunneling current with the increase of drain voltage is explained using drain induced Schottky barrier thickness thinning effect. The abnormal increase of drain current with the decrease of gate voltage is explained by hole carrier injection from drain into channel. The mechanism of threshold voltage increase in SB-MOSFETs is discussed. Based on the extracted model parameters, the performance of 10-nm-gate-length SB-MOSFETs is predicted. The results show that the subthreshold swing value can be lower than 60 mV/decade.

• 한국추진공학회지
• /
• 제10권2호
• /
• pp.53-61
• /
• 2006

3차원 냉각 채널을 가지는 재생 냉각 시스템에 대하여 축대칭 열유속 모델을 이용한 축대칭 열해석을 수행하고자 하였다. 연소실 벽면에서의 급격한 온도 분포 및 열전달량을 정확히 모사하기 위한 격자 테스트 수행하고, 냉각재와 연소 가스의 온도에 따른 물성치 변화가 냉각 성능 예측에 미치는 영향들을 살펴보았다. 핀효율을 이용한 축대칭 열유속 모델이 3차원 냉각 채널에서의 열전달량과 동일한 열전달량을 나타낼 수 있도록 정의하였다. 제안된 모델을 이용한 축대칭 해석 결과가 1차원 해석 모델보다 우수하며 3차원 해석 결과에 근접한 온도 분포를 보임을 확인하였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권4호
• /
• pp.331-340
• /
• 1994

Polysilicon on insulator has been recrystallized by zone melting recrystallization method with graphite strip heaters. Experiments are performed with non-seed SOI structures. When the capping layer thickness of Si$\_$3/N$\_$4//SiO$\_$2/ is 2.0.mu.m, grain boundaries are about 120.mu.m spacing and protrusions reduced. After the seed SOI films are annealed at 1100.deg. C in NH$\_$3/ ambient for 3 hours, the recrystallized silicon surface has convex shape. After ZMR process, the tensile stress is 2.49*10$\^$9/dyn/cm$\^$2/ and 3.74*10$\^$9/dyn/cm$\^$2/ in the seed edge and seed center regions. The phenomenon of convex shape and tensile stress difference are completely eliminated by using the PSG/SiO$\_$2/ capping layer. The characterization of SOI films are showed that the SOI films are improved in wetting properties. N channel SOI MOSFET has been fabricated to investigate the electrical characteristics of the recrystallized SOI films. In the 0.7.mu.m thickness SOI MOSFET, kink effects due to the floating substrate occur and the electron mobility was calculated from the measured g$\_$m/ characteristics, which is about 589cm$\^$2//V.s. The recrystallized SOI films are shown to be a good single crystal silicon.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2862-2867
• /
• 2008

High-temperature components of gas turbine operated for certain period of time can be reused by being repaired or rejuvenated. In case of the gas turbine combustion liners, the biggest and the most important one in the high-temperature components, come in a repair shop after operated for 8,000 or 12,000 hours according to the model and go through the repair and rejuvenation in order to be reused. A stated combustion liner is the first channel which has the combustion gas reached a nozzle from a fuel nozzle. Materials and coating properties of old and new model combustion liners were investigated. To repair these components after the visual inspection, the coatings of combustion liners were removed and then FPI(Fluorescent Penetrant Inspection), a kind of the NDI(Non-Destructive Inspection), was conducted. Damage patterns and the number of the damaged components were classified and analyzed based on data provided from the visual inspection over a long period of time. Focusing on the difference between old model and new model combustion liners, we analyzed the damage distribution and changes and consequently concluded that new model combustion liner would increase repair rate.

• 설비공학논문집
• /
• 제11권2호
• /
• pp.185-192
• /
• 1999

Effective thermal conductivities and pressure-drop-related properties of aluminum foam metals have been measured. The effects of porosity and cell size in the aluminum foam metal are investigated in detail. The porosity of the foam metal, considered in the present study, varies from 0.89 to 0.96 and the cell size from 0.65㎜ to 2.5㎜. The effective thermal conductivity is evaluated by comparing the temperature gradient of the foam metal with that of the thermal conductivity-known material. The pressure drop in the foam metal is measured by a highly precise electric manometer while air is flowing through the aluminum foam metal in the channel. The results obtained indicate that the effective thermal conductivities are found to be increased with a decrease in the porosity while the effective thermal conductivities ire little affected by the cell size at a fixed porosity. However, the pressure drop is strongly affected by the cell size as well as the porosity. It is seen that the pressure drop is increased as the cell size becomes smaller, as expected. The minimum pressure drop is obtained in the porosity 0.94 at a fixed cell size. A new correlation of the pressure drop is proposed based on the permeability and Ergun's coefficient for the aluminum foam metal.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.232-235
• /
• 2017

초음속 스크램제트 연소기는 약 2000K 이상의 고온과 빠른 유속을 가지는 연소 환경에 노출되며 현재 inconel 등의 고온 금속 소재를 적용하고 있다. 이러한 금속소재는 1000K 이상의 고온 환경에서 물성 저하 현상이 크게 나타나 장시간 및 재사용이 불가능하다. 이에 본 연구에서는 차세대 고온 내열 소재로 주목 받는 섬유강화 세라믹 복합소재를 스크램제트 연소기에 적용하기 위한 연구를 수행 하였으며, 연소효율 향상을 위해 고온의 연료를 분사할 수 있는 재생냉각형 연소기 제조를 위한 기초 기술을 개발 하였다.