• Journal of the Korea Society of Computer and Information
• /
• v.17 no.9
• /
• pp.149-156
• /
• 2012

The Fabric Electrode was proposed for the effective production of the display based on electrowetting in this paper and designed the source driver of flexible display which could be driven by the electrowetting cell. The electrowetting cell matrix was implemented on the substrate(PET) by imprinting. The driver fabric, wetting electrode fabric and conductive fabric was placed horizontally and vertically in the groove between cell matrix and the electrowetting cell matrix can be driven by the cross-point as electric connection. The integration density of driver module is decreased because using the R/2R DAC module per channel in the conventional method. The proposed method could utilize the effective production process and reduce the production price of a display panel. The source driver which consume lower power and can increase the integration density because of reducing the number of driver device per channel was designed and evaluate the driver operation by the simulation using the VHDL programming in this paper.

• Korean Journal of Remote Sensing
• /
• v.18 no.1
• /
• pp.53-59
• /
• 2002

The MSC is a payload on the KOMPSAT-2 satellite to perform the earth remote sensing. The instrument images the earth using a push-broom motion with a swath width of 15 km and a GSD(Ground Sample Distance) of 1 m over the entire FOV(Field Of View) at altitude 685 km. The instrument is designed to haute an on-orbit operation duty cycle of 20% over the mission lifetime of 3 years with the functions of programmable gain/offset and on-board image data compression/storage. The MSC instrument has one channel for panchromatic imaging and four channel for multi-spectral imaging covering the spectral range from 450nm to 900nm using TDI(Time Belayed Integration) CCD(Charge Coupled Device) FPA(Focal Plane Assembly). The MSC hardware consists of three subsystem, EOS(Electro Optic camera Subsystem), PMU(Payload Management Unit) and PDTS(Payload Data Transmission Subsystem) and each subsystems are currently under development and will be integrated and verified through functional and space environment tests. Final verified MSC will be delivered to spacecraft bus for AIT(Assembly, Integration and Test) and then COMSAT-2 satellite will be launched after verification process through IST(Integrated Satellite Test). In this paper, the introduction of MSC, the configuration of MSC electronics including electrical interlace and design of CEU(Camera Electronic Unit) in EOS are described. MSC Operation parameters induced from the operation concept are discussed and analyzed to find the influence of system for on-orbit operation in future.

• Journal of Broadcast Engineering
• /
• v.24 no.4
• /
• pp.643-659
• /
• 2019

In this paper, the technology verification of next generation broadcasting technology and service suitable for domestic broadcasting environment was carried out to build and activate domestic terrestrial UHD broadcasting. ATSC 3.0-based mobile HD broadcasting is currently conducting experiments with various parameters from broadcasting companies, research institutes and others. However, experiments on integrated transmissions, including audio services, have not been carried out. Through this experiment, we first performed the theory and experiment on the maximum number of ATSC 3.0 based UHD broadcasting service, maximum service number of HD broadcasting considering mobility, and maximum service number of audio broadcasting within one channel (6MHz). Second, parameters for integrated transmission of each service (UHD broadcasting, mobile HD and audio broadcasting) in one channel were derived. Finally, we studied technical possibilities through field tests that we receive while moving directly in the field.

• Journal of Distribution Science
• /
• v.9 no.2
• /
• pp.31-36
• /
• 2011

I conducted empirical analyses of what happens when an offline channel expands to an online channel and whether the pre-existing offline channel's competitive assets (e.g. brand reputation and level of service satisfaction) can be linked to online channel preference. I found that an offline channel's brand reputation and level of service satisfaction can have a direct influence on offline channel preference and a second-hand influence on online channel preference. Thus, if the competitiveness of the online channel is strong enough and its customers have a higher preference for the offline channel, they will be committed and loyal to the company. The resultant enhanced competitiveness of the offline channel will present opportunities for both present and future success. The main results are the following. First, the management of the distribution channel service quality is more important than that of the brand reputation. Customers' experiences of service and subjective evaluations are not important only as the leading factors in the long-term brand reputation management but also as influential factors in channel preference. SoThus, given that the service quality of the pre-existing channel is not the customers' main concern, a strategy of improving the level of service satisfaction aimed at present customers is more valuable than a wide brand positioning strategy aimed at general and new customers. Second, when an offline channel company establishes an internet shopping mall on an online channel, it is highly likely that the preference and subjective evaluation of the present customers will influence the online channel. This applies not only to the special case of an expansion from an offline intermediary channel to an online one, but also to an online channel acting as an expansion of the business model of a conventional manufacturing or service company: both cases are vertical integrations of marketing channels in an expansion of the distribution channel. My theory applies to a wide range of contexts. Third and finally, any business strategy can grasp the meaning of 'channel expansion. Fundamentally, it is an expansion of the sales activity channel and marketing activity. However, it is also a way of enhancing marketing and sales competitiveness through an expansion to an online or offline channel. The expansion of an offline company to an online channel could be seen not as improvement but as an innovation of the business process by which two goals are achieved with one technique. The former is expected to increase the sales of the offline company, and the latter is also expected to increase sales while also contributing to cost reduction.

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.35.2-35.2
• /
• 2008

The Albedo MONitor and RAdiometer (AMON-RA) instrument system is designed to measure Earth global albedo anomaly over the wavelength range of 0.3um to 4um. The instrument consists of two interconnecting optical subsystems i.e. a visible channel and an energy channel. The energy channel instrument consists of a modified Winston cone, a couple of relay mirrors and a pyro-electric detector. First, we report the integration and alignment process, leading to the prototype bolometer instrument. We then discuss the radiometric performance characterization including laboratory measurement results and the future plan for further incorporation of the bolometer instrument into the prototype AMON-RA instrument.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.7
• /
• pp.646-652
• /
• 2013

EU's Galileo project is a market-based GNSS (Global Navigation Satellite System) that is under development. It is expected that Galileo will provide the positioning services based on new technologies in 2020s. Because Galileo E1 signal for OS (Open Service) shares the same center frequency with GPS L1 C/A signal, CBOC (Composite Binary Offset Carrier) modulation scheme is used in the E1 signal to guarantee interoperability between two systems. With E1 signal consisting of a data channel and a pilot channel at the same frequency band, there exist several options in designing signal acquisition for Assisted-Galileo receivers. Furthermore, compared to SNR worksheet of Assisted-GPS, some factors should be examined in Assisted-Galileo due to different correlation profile and code length of E1 signal. This paper presents SNR worksheets of Galileo E1 signals in E1-B and E1-C channel. Three implementation losses that are quite different from GPS are mainly analyzed in establishing SNR worksheets. In the worksheet, hybrid long integration of 1.5s is considered to acquire weak signal less than -150dBm. Simulation results show that the final SNR of E1-B signal with -150dBm is 19.4dB and that of E1-C signal is 25.2dB. Comparison of relative computation shows that E1-B channel is more profitable to acquire the strongest signal in weak signal environment. With information from the first satellite signal acquisition, fast acquisition of the weak signal around -155dBm can be performed with E1-C signal in the subsequent satellites.

• The Journal of Society for e-Business Studies
• /
• v.15 no.2
• /
• pp.93-105
• /
• 2010

Address and location information is gaining importance as a channel between business entities and customers. However, as the new address scheme, which is based on street name and building number, is deployed, various problems occurred in the areas of postal service, logistics and management of customer information. And therefore it is necessary to make plans for integration and application of address information and location information. In this study, we clearly identify the problems when the governments and companies manage the address and location information under the circumstances of new address system. And we suggest improvement plans from the viewpoint of code scheme and database linkage.

• Journal of Communications and Networks
• /
• v.13 no.4
• /
• pp.313-318
• /
• 2011

When wireless channels undergo fast fading, non-coherent frequency shift keying (FSK) (de)modulation schemes may be considered for amplify-and-forward (AF) cooperative communications. In this paper, we derive the bit-error-rate performance of partial non-coherent receiver as a lower bound of the optimal non-coherent receiver for FSK modulated AF cooperative communications. From the simulation and analytical results, it is found that the derived lower bound is very closed to simulation results. This result shows that knowing partial channel state information may not improve system performance significantly. On the other hand, conventional optimal non-coherent receiver involves complicated integration operation. To address the above complexity issue, we also propose a near optimal non-coherent receiver which does not involve integration operation. Simulation results have shown that the performance gap between the proposed near optimal receiver and the optimal receiver is small.

• Vacuum Magazine
• /
• v.3 no.3
• /
• pp.15-18
• /
• 2016

In future wearable electronic systems, 3-dimensional (3D) devices have attracted much attention due to their high density integration and low-power functionality. Among 3D devices, gate-all-around (GAA) nanowire transistor provides superior gate controllability, resulting in suppressing short channel effect and other drawbacks in 2D metal-oxide-semiconductor field-effect transistor (MOSFET). Silicon nanowires (SiNWs) are the most promising building block for GAA structure device due to their compatibility with the current Si-based ultra large scale integration (ULSI) technology. Moreover, the theoretical limit for subthreshold swing (SS) of MOSFET is 60 mV/dec at room temperature, which causes the increase in Ioff current. To overcome theoretical limit for the SS, it is crucial that research into new types of device concepts should be performed. In our present studies, we have experimentally demonstrated feedback FET (FBFET) and tunnel FET (TFET) with sub-60 mV/dec based on SiNWs. Also, we fabricated SiNW based complementary TFET (c-TFET) and SiNW complementary metal-oxide-semiconductor (CMOS) inverter. Our research demonstrates the promising potential of SiNW electronic devices for future wearable electronic systems.

• Journal of Korean Society on Water Environment
• /
• v.22 no.3
• /
• pp.437-443
• /
• 2006

The Water usage is relationship which is close with the administrative cost from industrial facility. It is not easy to reduce a water usage. This research is the optimization of the waste water quantity which process waste water integration of the standard thermal power plant in system operate time. The turbine rotates by force of the steam and it produces an electricity. Demineralization Water is manufacture purity manufacturing equipment and it is supplied in power plant channel. We knew a possibility of reducing from pure control process. When it is reduced the Back Washing time, Rinsing time of the gravity filter and the activated carbon filter. Also, It is possible even from regeneration phase in Condensate Polishing Demineralization System. In addition, There is also the water which the drain of the sampling water for watching the condition of power plant process will be able to use. Integrates these processes it will be able to reduce an annual 30,000 ton degree. The research is want to use the fundamental data for the water curtailment of the power plant.