• The Journal of the Acoustical Society of Korea
• /
• v.31 no.6
• /
• pp.373-383
• /
• 2012

The performance of underwater acoustic communication system is sensitive to the Doppler shift and ISI(Inter-Symbol Interference). Therefore, the simulation algorithm needs to consider time-spread due to multipath arrivals which cause the ISI, and time-varying Doppler shift along with moving source and receiver. For this purpose, VirTEX(Virtual Time series EXperiment) based on Ray model has been developed. In this paper, VirTEX is used to compare the characteristics of ocean waveguide from the experimental data and illustrate the performance. The CIR(Channel Impulse Response) that characterizes the multipath arrivals with representative time-spread due to multipath arrivals is compared between numerically simulated and experimental probe signal. Also, the communication performance analysis for BER(Bit Error Rate) is compared between numerically simulated and experimental data signal. As a result, VirTEX can be useful as a simulation tool for evaluating the performance of underwater acoustic communication system.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.11-20
• /
• 2016

In this paper, we propose the channel estimation scheme for Long Term Evolution-Advanced (LTE-A) downlink system. The proposed scheme uses the fast fourier transform (FFT) interpolation scheme for the user moving at a high speed. The FFT interpolation scheme converts the channel frequency response obtained from least square (LS) or minimum mean square error (MMSE) channel estimation scheme to time domain channel impulse response by taking the inverse FFT (IFFT). After windowing the channel response in the time domain, we can obtain the channel frequency response by taking the FFT. We perform the system level simulation based on 20MHz bandwidth of 3GPP LTE-A downlink system. Simulation results show that the proposed channel estimation scheme can improve signal-to-noise-plus-interference ratio (SINR), throughput, and spectral efficiency of conventional system.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.261-273
• /
• 2016

Reconfigurable finite impulse response (FIR) filters whose filter coefficients and filter order change dynamically during run-time play an important role in the software defined radio (SDR) systems, multi-channel filters, and digital up/down converters. However, there are not many reports on such reconfigurable designs which can support dynamic variation of filter order and filter coefficients. The purpose of this paper is to provide an architectural solution for the FIR filters to support run-time variation of the filter order and filter coefficients. First, two straightforward designs, namely, (i) single-MAC based design and (ii) full-parallel design are presented. For large variation of the filter order, two designs based on (iii) folded structure and (iv) fast FIR algorithm are presented. Finally, we propose (v) high throughput design which provides significant advantage in terms of hardware and/or time complexities over the other designs. We compare complexities of all the five structures, and provide the synthesis results for verification.

• Journal of Biomedical Engineering Research
• /
• v.27 no.1
• /
• pp.22-29
• /
• 2006

This paper proposes an efficient array beamforming method using spatial matched filtering for ultrasound imaging. In the proposed method, ultrasound waves are transmitted from an array subaperture with fixed transmit focus as in conventional array imaging. At receive, radio frequency (RF) echo signals from each receive channel are passed through a spatial matched filter that is constructed based on the system transmit-receive spatial impulse response. The filtered echo signals are then summed. The filter remaps and spatially registers the acoustic energy from each element so that the pulse-echo impulse response of the summed output is focused with acceptably low side lobes. Analytical beam pattern analysis and simulation results using a linear array show that the proposed spatial filtering method can provide more improved spatial resolution and contrast-to-noise ratio (CNR) compared with conventional dynamic receive focusing (DRF) method by implementing two-way dynamically focused beam pattern throughout the field.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.11
• /
• pp.5394-5409
• /
• 2019

The paper investigates a novel detector receiver with Kalman channel information estimator and iterative channel response equalization for MIMO (multi-input multi-output) OFDM (orthogonal frequency division multiplexing) communication systems in fast multipath fading environments. The performances of the existing linear equalizers (LE) are not good enough over most fast fading multipath channels. The existing adaptive equalizer with decision feedback structure (ADFE) can improve the performance of LE. But error-propagation effect seriously degrades the system performance of the ADFE, especially when operated in fast multipath fading environments. By considering the Kalman channel impulse response estimation for the fast fading multipath channels based on CE-BEM (complex exponential basis expansion) model, the paper proposes the iterative receiver with soft decision feedback equalization (SDFE) structure in the fast multipath fading environments. The proposed SDFE detector receiver combats the error-propagation effect for fast multipath fading channels and outperform the existing LE and ADFE. We demonstrate several simulations to confirm the ability of the proposed iterative receiver over the existing receivers.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.807-810
• /
• 2007

Recently, ultra-wideband (UWB) technology based on the transmission of short duration pulses has gained much interest for its application to wireless communications. UWB small scale channel modeling work, including statistical characterization and potential models, are discussed. The significance, in terms of performance, of the channel impulse response model chosen for the simulation of UWB communications systems is also evaluated. Three traditional models are found to be useful for modeling NLOS UWB channels, but not LOS channels. In this paper, a new model for LOS UWB channels is presented and shown to represent LOS channels much more accurately than the traditional models.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.5
• /
• pp.556-563
• /
• 2002

In this paper, a novel method for designing an M-channel, causal, stable IIR cosine-modulated filter bank (CMFB) with near PR property is proposed. The IIR prototype filter is designed with a simple constraint using lattice stucture with 1st order allpass filter components. The IIR prototype filter which is designed by the proposed method has higher stopband attenuation and sharper roll-off characteristic than the one which is designed by the previously proposed method with similar complexity. The proposed M-channel IIR CMFB which is designed from this IIR prototype filter is applied to subband acoustic echo canceller (AEC). We obtained about 15dB higher ERLE using this subband AEC than when M-channel FIR subband AEC with similar complexity.

• Journal of Broadcast Engineering
• /
• v.16 no.2
• /
• pp.207-215
• /
• 2011

A signal passed through multi-path channel suffers ISI(Inter-Symbol Interference) and severe distortions caused by channel delay spread and noise components at the SC-FDE(Single Carrier with Frequency Domain Equalizer) transmission. Conventional UW(Unique-Word) based SC-FDE iterative channel estimation improves channel estimation performance by smoothing estimated CIR(Channel Impulse Response) of the noise components outside the channel length at time domain and restoring the broken cyclic property through UW reconstruction. In this paper, we propose channel estimation scheme through noise suppression within channel length. To suppress the noise, we estimate noise standard deviation as estimated CIR of the noise components outside the channel length and make criteria of the noise standard deviation gain that doesn't affect the original signal samples. When estimated CIR samples within channel length are less than the criteria value using the noise standard deviation and gain, the noise components are removed. Simulation results show that the proposed channel estimation scheme brings good channel MSE(Mean Square Error) and good BER(Bit Error Rate) performance.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.317-320
• /
• 2001

Blind adaptive channel identification of communication channels is a problem of important current theoretical and practical concerns. Recently proposed solutions for this problem exploit the diversity induced by antenna array or time oversampling leading to the so-called, second order statistics techniques. And adaptive blind channel identification techniques based on a off-line least-squares approach have been proposed. In this paper, a new approach is proposed that is based on eigenvalue decomposition. And the eigenvector corresponding to the minimum eigenvalue of the covariance matrix of the received signals contains the channel impulse response. And we present a adaptive algorithm to solve this problem. The performance of the proposed technique is evaluated over real measured channel and is compared to existing algorithms.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.6
• /
• pp.279-285
• /
• 2006

Power line communication channels are very complicated and models for communication channels vary with the types of electrical equipment, devices and load fluctuations. So, modeling and analysis of power line channels for implementation of power line communication systems is a very important process. Power line channel modeling and simulation are performed based on power system transient simulation models and power system CAD tools to create precise and accurate models. In this paper, a channel modeling and simulation method is proposed for power line communication systems using PSCAD/EMTDC, in which a PN 63 sequence code generator is applied for impulse response of the power line channel in the simulation model.