• Journal of Navigation and Port Research
• /
• v.31 no.2
• /
• pp.159-163
• /
• 2007

In this paper, we mainly analyze the performance of two ultra wideband communication systems, the classical Time Hopping Binary Pulse Position Modulation (TH-BPPM) UWB system and the Time Hopping Bipolar Pulse Amplitude Modulation (TH-BPAM) UWB system. The performance of TH-BPPM and TH-BPAM is analyzed in detail under an ideal AWGN channel and a correlation receiver. We use the power spectral density function to get the expression of BER of these two UWB systems. It yields simple and exact formulas relating the performance to the system parameters. The analysis shows that TH-BPPM suffers performance degradation with respect to TH-BPAM. Furthermore, we give the computer simulation of both data and image transmission and our simulation results also prove our theoretical analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1A
• /
• pp.55-61
• /
• 2005

Mobile communication systems are required not only to support high-data-rate transmissions in favorable channel conditions but also to be able to tolerate hostile environments possibly encountered by cellular communications. This paper compares CDMA(Code Division Multiple Access), OFDM(Orthogonal Frequency Division Multiplexing), and MC-CDMA(Multi-Carrier CDMA)with inaccurate channel estimates and low SNR environments. The equations and simulation results show that the performance losses in CDMA systems due to imprecise channel estimates are not considerable while frequency-hopping of OFDM systems can result in more than l0dB SNR losses. Also, this paper show that frequency-spreading of MC-CDMA can be very helpful for channel compensation performances than frequency-hopping or time-spreading of OFDM.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.2
• /
• pp.243-251
• /
• 2010

The military has been putting great efforts into applying data communication on existing voice communication systems being used in NCW(Network Centric Warfare). Data communication will be an effective choice in one of many effort to yield a minimum kill chain, comparing to legacy voice communications, when tactical units conduct their missions. However, the required budget will be enormous, in case of the replacement of a lot of legacy communication systems with new one. As a cost-effective alternative, the tactical data communication systems using the conventional radio systems instead of the development of new radio systems has been proposed. It is mandatory, though, to ensure QoS while maintaining data communication by making use of legacy radio systems already in use. This paper focuses on the performance issues experimented and analyzed for tactical data communication through the legacy radio systems as the first step towards guaranteed QoS. We have conducted various experiments such as the transmission error rate on certain tactical messages, performance evaluation of redundant transfers, the relationship between the transmission frame size and rate of error, the identification of error points in the transmission frame, and techniques to reduce the errors in both hopping and non-hopping modes. As a result of the performance experiments, The adaptive communication module which decides the redundant transmission or the Forward Error Correction(FEC) technique by analyzing channel status and current transmission status(hopping/non-hopping) of the legacy radio should be designed. the FEC technique in non-hopping, and the redundant transmission technique in hopping mode was recommended from the result of experiment with the frame size is 20bytes in non-hopping and 10Bytes frame size in hopping mode.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.10
• /
• pp.783-790
• /
• 2018

The frequency-hopping technique is one of the spread-spectrum techniques. Frequency hopping is a communication system in which the carrier frequency channel is hopped within the wideband. Therefore, a frequency-hopping system has such advantages as antijamming and low probability of intercept. This system is often used in military communications. Because frequency-hopping signal detection is difficult, it is an important research issue. A novel detection technique is proposed that can improve detection probability. When the received signal is transformed to a frequency domain sample by fast Fourier transform, spectral leakage lowers the detection probability. This problem can be solved by using the Hamming window, and the detection probability can be increased. However, in a frequency-hopping environment, the windowing technique lowers the detection probability. The proposed method solves this weakness. The simulation results show that the proposed detection technique improves the detection probability by as much as 13 %.

• 전자공학회논문지 IE
• /
• v.45 no.4
• /
• pp.1-6
• /
• 2008

A fast-hopping frequency synthesizer that reduces complexity and power consumption is presented for MB-OFDM UWB applications. The proposed architecture uses 3960 MHz LC VCO, 528 MHz ring oscillator, passive mixer and LC-tuned Q-enhancement BPF to generate Band Group 1 frequencies. The adjacent channel rejection ratio is less than -40 dBc for 3432 MHz and -H dBc for 4488 MHz. A fast switching SCL-tpre MUX is used to produce the required channel output signal and it takes less than 2.2 ns for band switching. The total power consumption is 47.9 mW from a 1.8 V supply.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.102-110
• /
• 2012

ZigBee networks developed for low power and short range communication are being used as home network solution for ubiquitous computing. However, as smart phones and tablet PCs have been widely used, WLANs which use same frequency with ZigBee networks have been increasingly used. Therefore, radio frequency interference causes many problems. To solve radio frequency interference problem among ZigBee networks and WLANs, many researches focus on designing interference minimization schemes in ZigBee networks. However, existing schemes have problems that have waste of resource for detecting interference, and have unnecessary time to avoid interference. In this paper, we propose an interference minimization scheme to solve radio frequency interference in ZigBee networks. The proposed scheme detects interference using ACK mechanism to reduce waste of resource, and avoids interference using table driven channel hopping scheme which is faster than existed schemes. The performance of proposed interference minimization scheme is evaluated by using OPNET simulator. Through the simulation result, we prove that proposed scheme has faster channel hopping than existing schemes.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.137-140
• /
• 2002

2.4Ghz ISM 대역에서 동작하는 Bluetooth는 동일한 대역에서 동작하는 WLAN(802.11.b), Cordless phone, microwave oven등의 신호가 interference로 작용하여, 성능이 크게 저하된다. 특히 Bluetooth과 WLAN은 상호간 interference로 작용하여 상호 성능 저하를 초래한다. 따라서, 두 장치간의 coexistence를 위한 방안으로 adaptive hopping frequency(AFH)이 제안되었다. 이 논문에서는 3 channel status를 이용한 AFH 방식을 제안하고, 그 성능을 검증하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.3
• /
• pp.941-955
• /
• 2015

In dual-channel networks (DCNs), all frequency hopping (FH) sequences used for data channels are chosen from the original FH sequence used for the control channel by shifting different initial phases. As the number of data channels increases, the hitting frequency point problem becomes considerably serious because DCNs is non-orthogonal synchronization network and FH sequences are non-orthogonal. The increasing severity of the hitting frequency point problem consequently reduces the resource utilization efficiency. To solve this problem, we propose a novel hitting frequency point collision avoidance method, which consists of a sequence-selection strategy called sliding correlation (SC) and a collision avoidance strategy called keeping silent on hitting frequency point (KSHF). SC is used to find the optimal phase-shifted FH sequence with the minimum number of hitting frequency points for a new data channel. The hitting frequency points and their locations in this optimal sequence are also derived for KSHF according to SC strategy. In KSHF, the transceivers transmit or receive symbol information not on the hitting frequency point, but on the next frequency point during the next FH period. Analytical and simulation results demonstrate that unlike the traditional method, the proposed method can effectively reduce the number of hitting frequency points and improve the efficiency of the code resource utilization.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.3
• /
• pp.215-222
• /
• 2019

A frequency hopping(FH) signal can change its carrier frequency during transmission and has spread-spectrum characteristics in these frequency bands. Therefore, FH signals are widely used in applications that require low-probability-of-intercept(LPI) and anti-jamming (AJ) abilities in wireless communication environments. In this study, the authors propose a method for generating hopping information (HI), which includes start time, dwell time, and hopping frequency for unknown FH signals. The proposed blind HI generation method produces signal detection information based on the spectrum data and then extracts HI using operational procedures for estimating the target FH signal's status, such as appearance, maintenance, and termination. Further, simulation results demonstrate that the proposed method provides accurate HI without detection omissions for various FH signals.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.802-809
• /
• 2001

A linear power amplifier for the VHF frequency-hopping(FH) transmitter using an adaptive predistortion linearizer is designed. An analog polynomial linearizer as predistorter is employed. The recursive least square(RLS) algorithm is employed in the optimization process to minimize the errors between the predistorter and postdistorter output signals. Experimental results show that the adjacent channel power of the designed power amplifier is reduced by of 10 dB.