• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1998년도 추계학술대회 논문집
• /
• pp.186-189
• /
• 1998

In this paper, we provide a mathematical formulation to describe the random mobility of users in cellular radio systems. With this, we can also study tile cell sojourn time (CST) distribution as well as the channel holding time (CHT) distribution. The study on user mobility enables to improve the resource management in cellular radio systems. We provide a versatile analysis tool that improves the limit of simplified analyses.

• 대한산업공학회지
• /
• 제29권2호
• /
• pp.135-144
• /
• 2003

Traffic performance in a microcellular system is much more affected by cell dwell time and channel holding time in each cell. Cell dwell time of a call is characterized by its mobility pattern, i.e., stochastic changes of moving speed and direction. Cell dwell time provides important information for other analyses on traffic performance such as channel holding time, handover rate, and the average number of handovers per call. In the next generation mobile communication system, the cell size is expected to be much smaller than that of current one to accommodate the increase of user demand and to achieve high bandwidth utilization. As the cell size gets small, traffic performance is much more affected by variable mobility of users, especially by that of pedestrians. In previous work, analytical models are based on simple probability models. They provide sufficient accuracy in a simple second-generation cellular system. However, the role of them is becoming invalid in a picocellular environment where there are rapid change of network traffic conditions and highly random mobility of pedestrians. Unlike in previous work, we propose an improved probability model evolved from so-called Random walk model in order to mathematically formulate variable mobility of pedestrians and analyze the traffic performance. With our model, we can figure out variable characteristics of pedestrian mobility with stochastic correlation. The above-mentioned traffic performance measures are analyzed using our model.

• 전기전자학회논문지
• /
• 제2권2호
• /
• pp.309-315
• /
• 1998

본 논문에서는 광대역 종합 통신망 응용을 위한 8b 52 MHz CMOS 서브레인징 (subranging) A/D 변환기 (analog-to-digital converter : ADC)를 제안한다. 제안된 A/D 변환기는 새로운 방식의 동작 순서 기법을 사용하여 기존의 이중 채널 서브레인징 A/D 변환기 동작에 존재하는 홀딩 시간 (holding time)을 제거함으로써 신호 처리 속도 (throughput rate)를 50 % 향상시켰다. 또한, 하위 비트 A/D 변환기에서의 잔류 전압처리에 인터폴레이션 (interpolation) 기법을 이용하여 A/D 변환기의 비교기에 사용되는 프리앰프의 수를 50 % 수준으로 줄임으로써 면적을 감소시켰다. 시제품 A/D 변환기는 0.8 um n-well double-poly double-metal CMOS 공정으로 제작되었고, 측정 결과, 5 V 전원 전압과 52 MHz 샘플링 주파수에서는 230 mW, 3 V 전원 전압 및 40 MHz 샘플링 주파수에서는 60 mW의 전력을 각각 소모한다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 봄 학술발표논문집 Vol.30 No.1 (C)
• /
• pp.478-480
• /
• 2003

일반적으로 음성전화망에서 수학적 모델을 사용하여 트래픽 분석을 수행하는 경우 호 도착 시간과 채널 보류 시간은 지수 분포라고 가정한다. 본 논문에서는 이동전화망을 구성하고 있는 교환기에서 추출한 과금 데이터를 이용하여 호 발생으로 인해 집계되는 호량애 관한 호 도착 시간과 채널 보류 시간이 나타내는 분포를 알아본다. 또한 분석된 확률 분포를 통계적 검정 방법을 이용하여 경험분포함수에 대한 기대 분포함수의 적합성을 판별한다.

• Design & Manufacturing
• /
• 제17권3호
• /
• pp.8-14
• /
• 2023

In this study, basic research was conducted on manufacturing technology of thick-walled light guide a component that controls the light source of automobile lamps. As a preliminary study for manufacturing the final injection molded parts, a model for analyzing the influence of micro patterns on light guides is presented. The optical characteristics of the light guide were analyzed according to the change of the curvature radius of the micro-optical pattern, and the injection molding characteristics of the light guide according to the change of injection molding conditions were analytically evaluated. It was confirmed that the luminance uniformity improves as the R value decreases for changes in the micro-pattern R value, but it was confirmed that there are technical limitations in actual injection mold core processing and high-replication injection molding. Injection molding analysis showed that cooling channel design is very important compared to general injection molding due to thick-wall characteristics and thickness variation. It was also confirmed that the cooling channel has a great influence on the cycle time and birefringence result due to residual stress. As a result of analyzing the influence of filling time, holding condition, and cooling on shrinkage, it was found that the cooling water temperature has a significant effect on the shrinkage of ultra-fine light guide parts, and the holding condition also has a significant effect.

• International Journal of Fluid Machinery and Systems
• /
• 제3권4호
• /
• pp.315-323
• /
• 2010

This work investigates the influence of water compressibility on pressure pulsations induced by rotor-stator interaction (RSI) in hydraulic machinery, using the commercial CFD solver ANSYS-CFX. A pipe flow example with harmonic velocity excitation at the inlet plane is simulated using different grid densities and time step sizes. Results are compared with a validated code for hydraulic networks (SIMSEN). Subsequently, the solution procedure is applied to a simplified 2.5-dimensional pump-turbine configuration in prototype with different speeds of sound as well as in model scale with an adapted speed of sound. Pressure fluctuations are compared with numerical and experimental data based on prototype scale. The good agreement indicates that the scaling of acoustic effects with an adapted speed of sound works well. With respect to pressure fluctuation amplitudes along the centerline of runner channels, incompressible solutions exhibit a linear decrease while compressible solutions exhibit sinusoidal distributions with maximum values at half the channel length, coinciding with analytical solutions of one-dimensional acoustics. Furthermore, in compressible simulation the amplification of pressure fluctuations is observed from the inlet of stay vane channels to the spiral case wall. Finally, the procedure is applied to a three-dimensional pump configuration in model scale with adapted speed of sound. Normalized Pressure fluctuations are compared with results from prototype measurements. Compared to incompressible computations, compressible simulations provide similar pressure fluctuations in vaneless space, but pressure fluctuations in spiral case and penstock may be much higher.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권6호
• /
• pp.416-428
• /
• 1999

A user-interactive pixel design tool for high-quality TFT-LCDs is realized and used to explore the sensitivity of the various array and device parameters for optimizing pixel design. In this tool, the Thompson cable equation and gradual-channel approximation were used for the gate time delay and TFT current modeling respectively. With this tool, each capacitance element, and TFT and array dimensions can be optimized under given design specifications. The electrical characteristics such ascharging ratio, gate time delay, pixel voltage level-shift, and holding ratio can be analyzed. The sensitivity analysis of those design parameters were executed and presented.

• 한국정보과학회논문지:시스템및이론
• /
• 제30권10호
• /
• pp.523-532
• /
• 2003

VOD 서비스는 멀티미디어의 특성인 높은 대역폭과 긴 재생시간으로 인해 비디오 서버의 네트워크 자원 소비가 많다. 비디오 서버의 네트워크 입출력 대역폭을 절약하기 위해 패칭이 제안되었다. 패칭은 True VOD를 실현하기 위해 멀티캐스트를 사용하여 비디오 스트림을 공유하고, 사용자에게 서비스지연 없이 즉시 VOD 서비스를 제공한다. 패칭에서 통신 채널은 정규 채널로서 하나의 비디오 전체를 멀티캐스트하기 위해 또는 패칭 채널로서 비디오의 앞부분만을 멀티캐스트하기 위해 사용된다. 본 논문에서는 패칭에서 사용되는 정규 채널의 사용 시간을 단축시키기 위해 부정규 채널과 정규 채널로 구분하는 버퍼링 패칭 기법을 제안한다. 제안하는 기법에서 부정규 채널은 정규 채널과 달리 비디오의 전체 데이타중에서 버퍼링 윈도우에 해당하는 비디오의 끝 부분을 전송하지 않으며, 이 비디오의 끝 부분은 최근의 정규 채널로부터 다운로드 되어 사용자 버퍼에 저장된다. 제안하는 기법의 성능을 패칭과 비교하기 위해 시뮬레이션을 수행하였으며 시뮬레이션 결과 제안한 기법이 사용자 스테이션에서 버퍼링 되는 비디오 데이터의 양은 패칭보다 많지만, 이탈율, 평균 서비스 지연시간, 공평성에 있어서 패칭보다 우수함을 보여주었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.852-855
• /
• 2003

Gas-Assisted Injection Molding(GAIM) process, that can be used to provide a hollow shape in a molding, is a variant of the conventional injection molding process. GAIM has many advantages such as reduction of material, sink mark. warpage. and lower injection pressure. Thus, GAIM has been widely applied in the industry to make moldings with a hollow channel such as handles, TV frames and so on. On the other hand, GAIM has some disadvantages such as slow cooling time and flow marks. In the disadvantages, hot gas core causes slow cooling of a molding and the overflow. which is to prevent flow mark. is waste of materials. To solve these problems, we developed a new GAIM system that we called RGIM(Reverse Gas Injection Molding). The RGIM has two special units; one is the overflow buffer, which is used for reduction of a material, and the other tile air unit, which is used for faster cooling of a molding. We conducted an experiment and simulation to verify the efficiency of the RGIM system. Through experiments and simulation, we confirmed the effectively operating of the RGIM system and extracted the optimum process conditions.

• 한국문헌정보학회지
• /
• 제27권
• /
• pp.183-214
• /
• 1994

The purpose of this study is to suggest the schemes to enhance information service functions by the utilization of CD-ROM in medical school libraries. The results of the study are summarized as follows : 1. The selection and evaluation of CD-ROM database are necessary steps in the planning of a CD-ROM. Before the CD-ROM is selected, therefore, medical libraries must make a practical evaluation criteria in important order of information services environment, characteristics of hardware/software, service requirements, price and cost, etc. 2. If possible, CD-ROM MEDLINE must be suited for the information services environment. 3. In case of the popular core journals, full-text CD-ROM should be gradually purchased. 4. In order to reduce the time required from search of bibliographic informations to receipt of original articles, CD-NET system and library holding administration program must be built up and developed. And channel of information search and order/receipt of original article should be varied. 5. Search education program for medical librarians and users should be enforced, and librarians must play an important role in CD-ROM retrieval consultant and intermediator.