• ETRI Journal
• /
• v.25 no.5
• /
• pp.379-386
• /
• 2003

This paper presents the design of a narrow-band channel filter and its group-delay equalizer for a Ka-band satellite transponder. We used an 8th order channel filter for high selectivity with an elliptic-integral function response and an inline configuration. We designed a 2-pole, reflection-type, group-delay equalizer to compensate for the steep variation of the group-delay at the output of the channel filter, keeping the thermal stability at ${\pm}7$ ns of group-delay variation at the band edges over 15-55$^{\circ}C$. We devised a new tuning technique using short-ended dummy cavities and used it for tuning both the filter and equalizer; this removes the necessity of additional tuning after the cavities are assembled. Through measurement, we demonstrate that the group-delay-equalized filter meets the equipment requirements and is appropriate for satellite input multiplexers.

• Journal of Broadcast Engineering
• /
• v.15 no.3
• /
• pp.407-413
• /
• 2010

In DCA (Dynamic Channel Allocation) scheme of uplink cellular system appling a frequency reuse factor of one, when a new call requests a channel, the new call will be blocked if its SINR (Carrier to Noise and Interference Ratio) is less than the required SINR or there is no available channel. The additional channel allocation for the blocked new call can be performed with channel borrowing in the adjacent cells. The channel borrowing causes the CCI (Co-Channel Interference), thus the SINR of the existing calls is deteriorated and the channel reallocation for the existing calls is required. As a result, the channel borrowing leads to a complex calculation so that it is a NP-hard problem. Therefore, to overcome the problem, we propose a novel Group Search-based DCA scheme which decreases the number of the blocked new calls and then reduces the number of the channel reallocation by the channel borrowing for the blocked new calls. The proposed scheme searches the all channels in a group of the adjacent cells and home cell at the same time in order to minimizes the number of the blocked new calls. The simulation results show that proposed Group Search-based DCA scheme provides better new call blocking probability and system throughput than the existing Single Search-based DCA scheme which searches only the channels in home cell.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.11
• /
• pp.103-108
• /
• 2019

The cooling rate and the uniformity of mold temperature, in the injection molding process, possess great influences on the productivity and quality of replications. The conformal cooling channel, which is of a uniform spacing from the mold cavity by the metal additive manufacturing process, receives much attention recently. The purpose of this study is to develop a mold core with a curved conformal cooling channel for a pottery-shaped thick-wall cosmetic container through the hybrid method of direct metal tooling (DMT) process. In this study, we design a mold core that contains the curved cooling channel for the container. A method that divides the cavity is proposed and the DMT process is carried out to form the curved cooling channel. The test mold core, with the curved conformal cooling channel, has been fabricated by the proposed method to confirm the feasibility of the design concept. We show that no leakage is observed for the additive manufactured test mold core, and its physical properties demonstrate that it can be sufficiently used as the injection mold core.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.113-116
• /
• 2000

The effect due to group delay and non linear characteristics in high speed data satellite channel was represented in this paper. Based on the modeling of group delay and non linear characteristics the performance was analyzed in ka band satellite channel. The group delay and non-linear characteristics in high speed data transmission severely affect the system performance. The more Eb/No is required to satisfy the required system performance. The optimum operating points of HDR satellite transmission system are implemented by considering analyzed results for channel characteristics

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1063-1064
• /
• 2011

• The Korean Journal of Physiology and Pharmacology
• /
• v.7 no.3
• /
• pp.131-142
• /
• 2003

We have studied mutant forms of Kir2.1 in which an aspartate residue (D172), important for gating by intracellular polyamines, is replaced by one of three basic residues (Arg, Lys or His). Such channels are highly selective for $K^+$, but show inward rectification that is a shallow function of voltage compared with that found in wild type. This inward rectification occurs with a reduced affinity for spermine and persists in the absence of polyamines. Though the unitary current-voltage relation shows some inward rectification, it is insufficient to account for that seen under whole cell recording. Channels open and shut under single channel recording, and changes of $P_{open}$ appear to generate inward rectification. In D172H, the reduction in affinity for spermine is greater when His is protonated at low $pH_i$. The effective valency for spermine is reduced from $3.09{\pm}0.07$ in wild type to $1.95{\pm}0.09$ in D172H at $pH_i$ 6.3. In the presence of dual mutants of Kir2.1, where E224 is also replaced, spermine affinity becomes undetectable. However, channels still show inward rectification and open and shut under hyper- and depolarisation, respectively. We suggest that Kir2.1 channel are able to undergo conformation changes; these changes may be important physiologically in generating inward rectification, the normal parameters of which are set by the binding of polyamines such as spermine.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.3
• /
• pp.207-215
• /
• 2013

This paper is channel assignment and scheduling techniques for efficient wireless AMI network. In AMI system, the multi-channel cluster network to be proposed defines the communication channel between NC (Network Coordinator) and CDA (Clustered Data Aggregator) as the network channel. CDA and OMD(Out Meter display) and communication channel between SMD(Smart Meter Device) are defined as the group channel. AMI network of the multi-channel cluster based in which the network channel and group channel is mixed increases the administration efficiency through the physical/logical consumer channel clustering. The reliability of inspection data through the channel use distinguished between the adjacent cluster is enhanced. In addition, the fast aggregation of data is possible and the size of a metering network is increased through the channel allocation of the multichannel cluster based.

• Journal of Distribution Science
• /
• v.19 no.7
• /
• pp.75-85
• /
• 2021

Purpose: This study is focused on analyzing the key reasons why One-brand Shop has been shrinking and Multi-brand shop is rising from the perspective of the trend changes of customer behavior and distribution channel in the Korean cosmetic market. The purpose of this study is to examine the factors influencing the attractiveness of cosmetics distribution channels from a store perspective and a consumer perspective. Research methodology: This study conducted a survey to define the factors that influence the attractiveness of cosmetics distribution channels. A total of 300 samples were investigated. Results: The store factors that influence the attractiveness of the cosmetics distribution channel were product quality, shopping convenience, and store accessibility in the group of single-brand store preferences, and product diversity and store experience in the group of multi-brand store preferences. Conclusions: Core competing factors of One-brand shop include product value, shopping convenience and accessibility. In contrast, Multi-Brand shops offer core competing factors of diversified product portfolio and shop function experience. A new trend has been found that the customer segments of the price-oriented group and the pleasure-oriented group have become the mainstream segments in the Korean cosmetic market. In conclusion, Multi-brand Shops are suggesting better overall customer experiences in terms of distribution channel attractiveness and customer values.

• ETRI Journal
• /
• v.25 no.6
• /
• pp.523-526
• /
• 2003

This letter presents an approximation of the outage probability of the pilot channel that can be used for CDMA cell planning. The approximation can determine system parameters for soft handover in IS-95-based cellular CDMA downlink design. Computer simulations show that our analytical results agree with empirical results.

• Journal of electromagnetic engineering and science
• /
• v.3 no.2
• /
• pp.140-146
• /
• 2003

In this paper, the design of a channel filter and its group-delay-and-amplitude equalizer is carried out for the Ka-band satellite transponder subsystem. The 8th order dual-mode filter is employed for high selectivity around the band-edges with an elliptic-integral function response and has an in-line configuration. The 2-pole, reflection-type, group-delay equalizer is designed and manufactured to reduce the group-delay and amplitude variation, which can be large for such a high order filter. It is noted that in both the filter and equalizer, adopting the dual-mode coupling mechanism leads to less mass and volume. Through measurement, the performance of the realized group-delay-equalized filter is shown to meet the equipment requirements and to be appropriate for the satellite input multiplexer.