• Journal of Communications and Networks
• /
• v.15 no.1
• /
• pp.71-76
• /
• 2013

A new class of quantum low-density parity-check (LDPC) codes whose parity-check matrices are dual-containing matrices constructed based on lines of Euclidean geometries (EGs) is presented. The parity-check matrices of our quantum codes contain one and only one 4-cycle in every two rows and have better distance properties. However, the classical parity-check matrix constructed from EGs does not satisfy the condition of dual-containing. In some parameter conditions, parts of the rows in the matrix maybe have not any nonzero element in common. Notably, we propose four families of fascinating structure according to changes in all the parameters, and the parity-check matrices are adopted to satisfy the requirement of dual-containing. Series of matrix properties are proved. Construction methods of the parity-check matrices with dual-containing property are given. The simulation results show that the quantum LDPC codes constructed by this method perform very well over the depolarizing channel when decoded with iterative decoding based on the sum-product algorithm. Also, the quantum codes constructed in this paper outperform other quantum codes based on EGs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.8
• /
• pp.1656-1662
• /
• 2005

This paper introduces M-PPAM(M-ary Pulse Position and Amplitude Modulation) architecture, combined PPM(Pulse Position Modulation) with PAM(Pulse Amplitude Modulation). Since M-PPAM can transmit several bits using one pulse, it is mon effective than PPM or PAM. Also, to obtain the same data transmission rate with PPM or PAM, M-PPAM can use a long pulse repetition period. This method will be able to use in the multi-path fading environment such as indoor condition. To accomodate multiple users, direct sequence technique is used. This paper has provided the modeling method of the M-PPAM DS-UWB receiver covering multi-user interference(MUI) with the Standard Gaussian Approximation under Gaussian channel. The performance of the receiver is simulated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9B
• /
• pp.1608-1615
• /
• 1999

In this study, we investigate the inter cell interference of LMDS(Local multipoint Distribution Service) system cell in LMDS system design process. There are several interference sources in LMDS system but we consider co-channel adjacent interference, cross-polarization interference, tx/rx interworking interference as three major factors. As the summation of each interference, C/N is keep 19 dB in 2km range but decreased gradually over 2km. Based on theoretical results, we process the experimental test and get results that C/I=20 dB have to be maintained to transmit the data successfully under rain fall attenuation condition. This experiential results are similar to the theoretical analysis results we examined.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.9
• /
• pp.504-511
• /
• 2000

The reliability of system is to become a important concern in developed industry. The controller based on the reliability is so important position. PPC(Plant Protection Controller) is for plant protection and human life by fault detection and control action against the transient condition of plant. The protection system of the nuclear reactor and chemical reactor are representative of PPC. This paper presents analysis of PPC relaibility formal problem statement of optimal redundancy based on the reliability for PPC. And the problem is optimized by genetic algorithm, The genetic algorithms is useful algorithm in case of large searching complex gradient existence local minimum. The genetic algorithms is useful algorithm is case of large searching complex gradient existence local minimum. The ability and effectiveness of the proposed optimization is demonstrated by the target reliability of one channel. PPC. using the failure rate based on the MIL-HDBK-217

• The KIPS Transactions:PartD
• /
• v.8D no.6
• /
• pp.781-788
• /
• 2001

As changing financial environment and increasing the number of access channel to banking system, new banking system is needed which can be developed financial commodity rapidly, can be deployed easily, and can be maintained easily. Component based development method is believed to meet these demands. In this paper, we propose EJB banking component and explain its system architecture and functionality. And we design and implement approval system on EJB banking component system. To implement approval system, approval conditions are classified and registered. Using registered approval condition, transactions are classified whether approval is needed or not. Approval client for web based client standardization has an advantage of no need to deploy and manage software version.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3282-3285
• /
• 1999

Fluid characteristics at microscale were tried to be solved in this paper by showing how they deviate with conventional flow governing equations. (e.g. Navier-Stokes Equation) In earlier studies, this deviation phenomena was caused because of omitting no slip flow condition, micropolar effect and EDL(Electric Double Layer)effect of fluid which are usually negligible at macroscaled phenomena. The characteristics of fluid flow were tried to be studied by measuring pressure difference of specified length of the channels using the almost squared micromachined channels. By acquiring pressure difference, we could drive different values (viscosity, flow velocity. etc) from it and these data will be compared with macroscaled flow characteristics. As making microchannel is not easy work and that our knowledge is at mere stage, we had to fail to make it in this time. The hardest thing in this work is to make a hole which is directly connected with channel. The more efficient and easy way of making microchannel is proposed in this paper.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.6
• /
• pp.107-115
• /
• 2010

This study was surveyed to identify changes of flora during three years after restoration in Cheonggyecheon stream. There are four sections in Cheonggyecheon. One and two sections are upper streams and three and four sections are down streams. It was surveyed 328 species in 2006. In 2007 and 2008, 446 and 444 species were found, respectively. This result shows that Cheonggyecheon is unstable initial condition in restored stream ecosystem. Naturalized species were 58 species in 2006 and it was respectively 61 and 63 species in 2007 and 2008. Hazard species of ecosystem were three common species during survey period. In appearance of flora per section, three and four sections constituted by natural sites such as point bars, wide flood plains, riffles and ponds, marshes, etc. were surveyed more species than one and two constructed by concrete materials and narrow flow channel. Recently, as time goes by, introduced species are being increased. And succession has mainly been progressed by one year or binary herbs and perennial herbs. Compared with other restored streams, Cheonggyecheon showed more flora than Yangjaecheon and Anyangcheon. It is judged owing to length of surveyed site, various planted species and area of inhabitation space. To manage restored stream ecosystem, monitoring is essential. Further, because change of vegetation after restoration in Cheonggyecheon is very important, continuous monitoring about Flora and Naturalized species and Hazard species of ecosystem is also very important.

• Design & Manufacturing
• /
• v.11 no.3
• /
• pp.51-55
• /
• 2017

Micro fuel cells have high reliability and long usage time. Among them, PEMFC (polymer Electrolyte Membrane Fuel Cell) is suitable as a portable power source because it is easy to fix electrolyte and simple structure. The bipolar plate, a key component of the fuel cell, is produced by cutting. In the case of micro fuel cell separator, burr is very small and the flow channel size in the separator is very small. Therefore, it is difficult to remove burrs in the usual way such as a brushing or ultra-sonic method. Therefore, this study proposed electrolytic polishing process and analyzed the characteristics of each condition by introducing the concept of roughness reduction rate. In addition, the ultrasonic process was added to analyze the effect of ultrasonic addition.

• Journal of Broadcast Engineering
• /
• v.8 no.2
• /
• pp.136-145
• /
• 2003

This paper proposes a DTV receiver using beamforming techniques to improve indoor and mobile reception. The proposed DTV receiver estimates the directions of arrival (DOAs) of incoming signals using Capon's DOA estimation method and generates an adaptive antenna beam pattern to the estimated DOA of the mainpath signal to Improve the channel condition. After beamforming, a following decision feedback equalizer (DFE) removes the remaining multipath components. The proposed receiver can be implemented with a conventional DTV receiver without anymodification. The performance of the proposed receiver is analyzed with modified Brazilian field test models, which include DOA information of Incoming signals. Simulation results show that the proposed receiver can satisfy the threshold of visibility (TOV) when input signal to noise ratio is slightly over 10 dB.

• Journal of Biomedical Engineering Research
• /
• v.29 no.3
• /
• pp.191-197
• /
• 2008

This research focused on the development of wireless telemetry system that can monitor heart rates of multiple rehabilitation patients in real time without constraint. The whole system consists of the multiple patient's side devices (PSDs) and one central monitoring system (CMS). The PSD consists of a microphone, amplifier, filter, microcontroller, and RF (Radio Frequency) modem. In addition, the PSD was designed to be wearable and low power consumption. The CMS consists of an RF modem and general PC and it was designed to monitor heart rates from multiple patients simultaneously. The system warns an alarm signal when a patient's heart rate exceeds the pre-set range for each patient. This system can be useful to monitor the heart rate of exercising rehabilitation patients and control the patients condition and the exercising level.