• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.36-36
• /
• 2012

Drainage water in lowland paddy fields is quantitatively influenced recycle and/or repeated irrigation by irrigation facilities, i.e. pumps, check gates, small reservoirs and so on. In those drainage channels, nutrients accumulation and increasing organic matters are considered to be occurred, and water quality would be degraded not only environmental aspect but irrigation purpose. In general, Total Nitrogen (T-N) is interested water quality index in irrigation water, because high nitrogen concentration sometimes caused decreasing rice production by excess growth and fallen or degrading quality of taste, then, farmers would like to clear water less than 1mg/L of T-N concentration. In drainage channel, it is known that the nitrogen concentration change is influenced by physical, chemical and biological properties, i.e, stream or river bed condition, water temperature, other water quality index, and plant cover condition. In this study, discharge data (velocity and level) in a drainage channel was monitored by an Acoustic Doppler system and water quality was sampled at same time in 2011. So those data was analyzed by multi regression model to realize hydrological and environmental factors to influence with nitrogen concentration. The results showed the difference tendency between irrigation and non-irrigation period, and those influenced factors would be considered in water quality model developing in future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.587-592
• /
• 2008

In order to investigate the performance of an internal heat exchanger for $CO_2$ refrigerant system, the experiment was performed. Four kinds of internal heat exchangers(IHX) were used. The effects on the IHX length, the number of tube, the operating condition and the type of IHX were investigated. With increasing of the IHX length, the capacity and efficiency increased. The pressure drop of the low-side was larger compared with that of the high-side. As the temperature of the gas cooler increased, the capacity and efficiency increased linearly. The operation condition of evaporator was suggested as two phase region rather than superheat region. The capacity and efficiency of the micro-channel was larger about 90% and 75% than those of the tube. But the pressure drop of the micro-channel was more larger, compared with that of the tube.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9C
• /
• pp.840-848
• /
• 2007

A multiple description coding (MDC) scheme for 3-D Data is presented. First, a plane-based 3-D data is split into two descriptions, each of which has identical contribution in 3-D surface reconstruction. In order to maximize the visual quality of reconstructed 3-D data, then, plane parameters are modified according to channel error condition. Finally, these descriptions are compressed and transmitted over distinct channels. In decoder, if two descriptions are available, we reconstruct a high quality 3-D data. If only one description is transmitted, however, 3-D surface recovery scheme reduces artifacts on erroneous 3-D surface, yielding a smooth 3-D surface. Therefore, the proposed algorithm guarantees acceptable quality reconstruction of 3-D data even though one channel is totally lost.

• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.153-162
• /
• 2016

Experimental investigation was carried out on the CHF(Critical Heat Flux) under downward flow condition in narrow rectangular channels simulating subchannel of plate-type-fuel for JRTR(Jordan Research and Training Reactor). The experiments covers the license requirement of the research reactor. Two test sections used in this study simulate full scale subchannels for fission moly uranium target and plate-type-fuel, respectively. From the experimental results, the parameters affecting on the CHF are investigated. By using experimental data, the existing CHF prediction models were evaluated. Finally, the applicability of correlations were analysed to predict CHF in the narrow rectangular channel under the downward flow condition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.5
• /
• pp.425-432
• /
• 2014

The Enhanced Distributed Channel Access (EDCA) function of IEEE 802.11e standard defines contention window (CW) for different Access Category (AC) limits to support Quality-of-Service (QoS). However, it have been remained the problem that the collision probability of transmission is increasing in congested network. Several different solutions have been proposed but the collision occurs among same priority queue within the same station to compete the channel access. This paper presents an APCA (Advanced Priority Collision Avoidance) algorithm for EDCA that increases the throughput in saturated situation. The proposed algorithm use reserved field's bits of FC(Frame Control) using IEEE 802.11e standard's RTS/CTS (Request to Send / Clear to Send) mechanism to avoid data collision. The simulation results show that the proposed algorithm improves the performance of EDCA in packet loss. Using Jain's fairness index formula, we also prove that the proposed APCA algorithm achieves the better fairness than EDCA method under network congested condition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6A
• /
• pp.614-623
• /
• 2008

A very low complexity QRD-M algorithm based on adaptive search area is proposed for MIMO systems. The conventional QRD-M scheme extends each survivor paths to all constellation symbols at each layer and selects M paths of minimum path metrics. We found that performance will not be degraded even if we adaptively restrict the survivor path extension only to the neighboring points of temporary detection symbol according to the channel condition at each layer. By employing this feature, we propose a new QRD-M algorithm achieving the near MLD performance with a reduced complexity. We employ the channel gain ratio among the layers as a channel condition indicator, which does not require SNR estimation. The simulation results show that the proposed scheme effectively achieves near MLD performance while maintaining the overall average computation complexity much smaller than the conventional QRD-M algorithm.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.6 no.4 s.23
• /
• pp.49-56
• /
• 2006

The rainfall runoff is drained through sewerage outlet at urban area. But, there is no guideline or standard to install sewerage outlet, so the sewerage outlet are designed or installed by discretion of engineers or constructors. In this paper, for the sake of supporting basic data to design, it would be suggested a guideline for less influenced to flow at the channel flow condition through hydraulic experiment by variation of lateral inflow discharge, sewerage outlet projecting part, sewerage outlet direction and position. Through 10 cases of experiments, it would be less influenced two sewerage outlet at up and down stream than one installed at up or down stream even though the same discharge. And installed conditions which are installed angle and protecting part will be influenced to increase water depth and to decrease velocity at upstream. So when sewerage outlet is installed, it would be try to find a installing way to be less influence with more careful.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.7
• /
• pp.462-469
• /
• 2008

A regenerative evaporative cooler has been fabricated and tested for the evaluation of cooling performance. The regenerative evaporative cooler is a kind of indirect evaporative cooler comprised of multiple pairs of dry and wet channels. The air flowing through the dry channels is cooled without any change in the humidity and at the outlet of the dry channel a part of air is redirected to the wet channel where the evaporative cooling takes place. The regenerative evaporative cooler fabricated in this study consists of the multiple pairs of finned channels in counterflow arrangement. The fins and heat transfer plates were made of aluminum and brazed for good thermal connection. Thin porous layer coating was applied to the internal surface of the wet channel to improve surface wettability. The regenerative evaporative cooler was placed in a climate chamber and tested at various operation condition. The cooling performance is found greatly influenced by the evaporation water flow rate. To improve the cooling performance, the evaporation water flow rate needs to be minimized as far as the even distribution of the evaporation water is secured. At the inlet condition of $32^{\circ}C$ and 50%RH, the outlet temperature was measured at $22^{\circ}C$ which is well below the inlet wet-bulb temperature of $23.7^{\circ}C$.

• Membrane Journal
• /
• v.6 no.1
• /
• pp.44-52
• /
• 1996

For the purpose of the optimal design of a frame and plate type of pervaporation module, model equations which can predict the effects of feed flow condition on the temperature distribution of the feed developed in the module were established and the temperature distribution with feed flow condition was investigated through the model si$$\mu$ation. With increasing the Reynolds number of feed flow in the module, the flow velocity gradient in the channel height-direction as well as the volume rate of feed which acts as energy source for the evaporation of perrneants on the permeate-side surface of a membrane increased to such an extent that both mass and heat flux in the channel height direction could increase and the temperature drop of feed due to the evaporation of the permeant could be reduced correspondingly. A decrease in channel height caused the temperature drop of feed because of decreasing feed flow in the module. It was observed that the si$$\mu$ation result on the effect of Re on the temperature distribution of feed in the module has an agreement with experiment.

• Journal of Satellite, Information and Communications
• /
• v.7 no.2
• /
• pp.97-103
• /
• 2012

A very low complexity QRD-M algorithm based on limited search area is proposed for MIMO systems. The conventional QRD-M algorithm calculates Euclidean distance between all constellation symbols and the temporary detection symbol at each layer. We found that performance will not be degraded even if we adaptively restrict the search area of the candidate symbols only to the neighboring points of temporary detection symbol according to the channel condition at each layer. As a channel condition indicator, we employ the channel gain ratio among the layers without necessity of SNR estimation. The simulation results show that the proposed scheme effectively achieves near optimal performance while maintaining the overall average computation complexity much smaller than the conventional QRD-M algorithm.