• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.5-8
• /
• 2000

In this paper, we present a new cぉnet coding method, so called MLC (Multi-Level Codes), for error detection and correction in digital wireless communication. MLC coding method we the same coding procedure wed in the convolutional coding but it is distinguished from the existing convolutional coding in point of generating the code word by using multi-level information data (M-ary signal) and in point of speed of coding procedure Through computer simulation, we analyze the performance of the coding method suggested here compared to convolutional coding method in case of modulo-operation and in case of non-binary coding Procedure respectively under various channel environments.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.277-280
• /
• 2003

In this paper, we analyze the performance of transmitter and receiver of W-CDMA system using the channel coding and space time code in downlink over ITU-R realistic channel model. We can improve the reliability of communications and increase the data rate by channel coding, and we can get a diversity gain by using the space time code over fading channels. We also apply the RAKE receiver to improve tile performance in multi-Path fading channel environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5B
• /
• pp.517-529
• /
• 2011

In this paper, the parameters of the RTT (Radio Transmission Techniques) for SANET (Ship Ad-hoc NETwork), which is considered for the next generation maritime communication systems, are set up. A channel model has been analyzed based on the practical measured maritime wireless channel in VHF (Very-High Frequency) for SANET system. Also, by considering the frame structure including preamble, guard time and pilots for both single and multi-carrier systems, the BER (Bit Error Rate) performances are evaluated and analyzed in the aspects of channel compensation and channel coding techniques. Based on the simulation results, optimal modulation & coding schemes are suggested for SANET. That is, in single-carrier system by using differential modulation schemes, channel compensation is not necessary. However, channel coding is helpful to achieve additional gain. On the other hand, when 16-QAM modulation is employed in multi-carrier system, the implementation of both channel compensation and channel coding techniques show huge performance gain for various of K values, which are related to different maritime environments, and the rolling effects of wave.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3C
• /
• pp.170-174
• /
• 2011

We introduce the network coding which cooperative communication for two-way relay channel. We propose a new network coding scheme using orthogonality for cooperative communication system. The proposed network coding scheme via orthogonal mapping shows better BER performance because proposed scheme weakens error propagation which is disadvantage of DF scheme. And proposed scheme maintains same throughput compared to conventional scheme.

• Information and Communications Magazine
• /
• v.12 no.6
• /
• pp.88-100
• /
• 1995

본 고에서는 디지털 위성방송 시스템의 구성요소중 channel부의 구조 및 기능분석을 국내 디지털 DBS를 기준으로 설명하였다. channel부는 channel coding과 modulation 기능을 수행한다. Channel coding은 Reed Solomon code, interleaving, convolutional code를 연집하여 사용하고, modulation은 QPSK와 raised cosine pulse shaping을 한다. 수신기의 channel부는 antenna, LNB, tuner, QPSK 복조기, Viterbi, deinterleaver, RS decoder로 구성되어있다.

• Journal of Communications and Networks
• /
• v.10 no.4
• /
• pp.371-383
• /
• 2008

Application of network coding in wireless two-way relay channels (TWRC) has received much attention recently because its ability to improve throughput significantly. In traditional designs, network coding operates at upper layers above (including) the link layer and it requires the input packets to be correctly decoded. However, this requirement may limit the performance and application of network coding due to the unavoidable fading and noise in wireless networks. In this paper, we propose a new wireless network coding scheme for TWRC, which is referred to as soft network coding (SoftNC), where the relay nodes applies symbol-by-symbol soft decisions on the received signals from the two end nodes to come up with the network coded information to be forwarded. We do not assume further channel coding on top of SoftNC at the relay node (channel coding is assumed at the end nodes). According to measures of the soft information adopted, two kinds of SoftNC are proposed: amplify-and-forward SoftNC (AF-SoftNC) and soft-bit-forward SoftNC (SBF-SoftNC). We analyze the both the ergodic capacity and the outage capacity of the two SoftNC schemes. Specifically, analytical form approximations of the ergodic capacity and the outage capacity of the two schemes are given and validated. Numerical simulation shows that our SoftNC schemes can outperform the traditional network coding based two-way relay protocol, where channel decoding and re-encoding are used at the relay node. Notable is the fact that performance improvement is achieved using only simple symbol-level operations at the relay node.

• The KIPS Transactions:PartB
• /
• v.9B no.1
• /
• pp.91-98
• /
• 2002

In this paper, an implementation method of the efficient image transmission stage using watermarking and channel ceding is proposed. Usually, image communication system consists of both a transmitter part and a receiver part. The transmitter part takes charge of copyright protection of the generated image data, and image coding and compression that can deal with channel noises when transmitting. In the transmitter part, we propose a channel coding method which protects both the watermark signal and the original signal for protecting the copyright of image data and solving channel noises when transmitting. Firstly, copyright protection of image data is conducted. For this, image structure analysis is performed, and both the improvement of image quality and the generation of the watermark signal are made. Then, the histogram is constructed and the watermark signals are selected from this. At this stage, by embedding of the coefficients of curve fittness into the lower 4 bits of the image data pixels, image quality degradation due to the embedding of watermark signals are prevented. Finally, turbo coding, which has the most efficient error correction capability in error correction codes, has been conducted to protect signals of watermark and preserved original image quality against noises on the transmission channel. Particularly, a new interleaving method named "semi random inter]easer" has been proposed.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.7
• /
• pp.1-11
• /
• 1993

The bit error rates of DS/SSMA DPSK system with diversity and FEC channel coding in Rayleigh fading and log-normal shadowing channel are evaluated. Microscopic postdetection diversity and macroscopic selection diversiity are used to mitigate the effects of Rayleigh fading and log-normal shadowing, respectively. The numerical results show that the composite use of diversity and channel coding is very efficient for improving system performance compared to their respective uses.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.478-481
• /
• 2000

In this paper, we propose a joint coding system for still images using source coding and powerful error correcting code schemes. Our system comprises an LVQ (lattice vector quantization) source coding for wavelet transformed images and turbo coding for channel coding. The parameters of the image encoder and channel encoder have been optimized for an n-D (dimension) cubic lattice (D$_{n}$, Z$_{n}$), parallel concatenation fur two simple RSC (recursive systematic convolutional code) and an interleaver. For decoding the received image in the case of the AWGN (additive white gaussian noise) channel, we used an iterative joint source-channel decoding algorithm for a SISO (soft-input soft-output) MAP (maximum a posteriori) module. The performance of transmission system has been evaluated in the PSNR, BER and iteration times. A very small degradation of the PSNR and an improvement in BER were compared to a system without joint source-channel decoding at the input of the receiver.ver.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.4
• /
• pp.321-326
• /
• 2015

Smart metering is one of the most implementable internet-of-thing service. In order to implement the smart metering, a wireless communication network should be newly designed and evaluated so as to satisfy quality-of-service of smart metering. In this paper, we consider a wireless network for the smart metering implemented with multi-purpose wireless chips and channel coding-functioned micro controllers. Especially, channel coding is newly adopted to improve successful frame transmission probability. Based on the successful frame transmission probability, average transmission delay and delay violation probability are analyzed. Using the analytical results, service coverage expansion is evaluated. Through the delay analysis, service feasibility can be verified. According to our results, channel coding needs not to be utilized to improve the delay performance if the smart metering service coverage is several tens of meters. However, if more coverage is required, chanel coding adoption definitely reduces the delay time and improve the service feasibility.