• Journal of The Korean Astronomical Society
• /
• v.35 no.3
• /
• pp.143-149
• /
• 2002

In this paper we present a methodology to derive the temporal change of the magnetic shear angle from a series of vector magnetograms, with a high time cadence. This method looks for the minimum change of the shear angle between a pair of magnetograms, free from the $180^{\circ}$ ambiguity, and then accumulates this change over many successive pairs to derive the temporal change of magnetic shear. This methodology will work well if only the successive magnetograms occurred in an active region are well aligned and its helicity sign is reasonably determined. We have applied this methodology to a set of vector magnetograms of NOAA Active Region 9661 on October 19, 2001 by the new digital magnetograph at the Big Bear Solar Observatory (BBSO). For this work we considered well aligned magnetograms whose cross-correlation values are larger than 0.95. As a result, we have confirmed the recent report of Wang et al. that there was the abrupt shear change associated with the X1.6 flare. It is also demonstrated that the shear change map can be an useful tool to highlight the local areas that experienced the abrupt shear change. Finally, we suggest that this observation should be a direct support of the emergence of sheared magnetic fields.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.6
• /
• pp.163-171
• /
• 2015

This study aimed to establish a field observation system for monitoring tempo-spatially precise changes of groundwater level and to analyze the impact of rainfall and irrigation practices on groundwater changes in paddy regions. The monitoring system comprising of all nine groundwater observation wells and four ponding depth sensors was installed in a part of paddy regions benefited from Gosam reservoir, Ansung-si. The result of grundwater level change during the irrigation period in 2002 was averagely 0.51 m higher than that during the non-irrigation period. In particular between March before puddling and June after transplanting, there was maximum 1.23 m rise in groundwater level. On the other hand, concerning the change in ponding depth, groundwater level changed similarly, and hourly rainfall was revealed to have better correlation with 24-hour delayed hourly groundwater level than with the corresponding groundwater level. Eventually, this study could be referenced for further studies to set up a more comprehensive and sustainable monitoring system of groundwater conditions.

• Journal of Technologic Dentistry
• /
• v.43 no.2
• /
• pp.35-41
• /
• 2021

Purpose: This study aimed to investigate the flexural strength and surface microstructure of the zirconia crown according to the number of glazing zirconia prostheses. Methods: The specimens were made as follows. A specimen without glazing: 1ea, first glazed specimens (group B): 10ea, second glazed specimens (group C): 10ea, third glazed specimens (group D): 10ea. Three-point measuring strength equipment and electron microscopes were used for strength measurement and microstructure observation. As for statistical analysis, one-way ANOVA and t-test (level of significance level=5%) were used to determine the difference in the change in flexural strength according to the number of glazing zirconia prostheses. Results: ANOVA analysis of groups B (1st glazing), C (2nd glazing), and D (3rd glazing) revealed that the change in strength between the groups is statistically significant (p=0.023). The Mann-Whitney test for each group revealed that the difference in flexural strength between groups B and C was not statistically significant (z=-0.302, p=0.762) while that between groups C and D was statistically significant (z=-0.257, p=0.01). Microstructure observation revealed 3 changes in the microstructure of the surface of the glaze powder were observed. Conclusion: According to the number of glazing zirconia prostheses, it was found that the difference in strength between groups was statistically significant, and changes in the microstructure were observed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.11
• /
• pp.2064-2075
• /
• 2011

In this paper, robust multi-level perturbation and observation (MLPO) maximum power point tracking (MPPT) control are presented of the environmental change including the solar radiation and temperature. Because the maximum power point of the Photovoltaic (PV) is changing according to the solar radiation and temperature, the technology which traces the maximum power point in order to increase the power efficiency is recognized as the very important part. The general requirement for the MPPT is that system is simple, the cost is inexpensive, the PV tracking function and output change are small. Conventional perturbation and observation (PO) method is a simple system but there is the disadvantage that an efficiency of system becomes low. In addation, the incremental conductance (IC) control is required expensive CPU because of a large of calculations. In order to solve this problem, in this paper, the MLPO MPPT control using the method diversifying the step size according to the environment condition is presented. The validity of the MLPO method presenting from this paper is proved through analyzing the solar power generation output error at the steady state.

• Korean Institute of Interior Design Journal
• /
• v.13 no.5
• /
• pp.56-65
• /
• 2004

This study divides the expression techniques of Zaha Hadid into various types who has manipulated her targeted drawings as her unique design tools in the process of architectural design, analyzes them in terms of the vanishing point, visual point for observation and object of observation and attempts to figure out how the multi-visual expression is applied in the conception of form and space and method of observation. By doing so, this study will suggest the characteristics of the expression techniques using multi-visual. Through the above study, the utilization and characteristics of multi-visual expression of the architecture design process of Zaha Hadid are summarized as follows. Firstly, Zaha Hadid utilizes the strained multi-visual perspective technique which can look out over the interaction between masses simultaneously at multi-angles by changing a perspective drawing of vanishing point 1, 2, and 3. Secondly, it utilizes a landscape perspective technique and embodies an Idea of landscape's spatial arrangement through it as the means to search a dynamic relation of architecture, city, land, and space. Thirdly, there is a projected expression using X-ray perspective technique to make the relations between inside and outside of building to three-dimension volume. Zaha Hadid has used the expression techniques using multi-visual by utilizing various points and has developed and used them as her creative tools for idea. By means of escaping from the expression techniques of simple revival, she has used a new expression technique that can represent recognized space. In the past, the content could change the expression techniques in architecture; however, the liberation of architectural expression techniques can change the content in modern times when require new attempts.

• Journal of Environmental Science International
• /
• v.23 no.4
• /
• pp.561-569
• /
• 2014

The water resources system of Jeju-do Island entirely depends on groundwater. This study is making a precision observation of baseflow, surface water, water shortage that might be vulnerable to climate change and drought in future. The field observation of baseflow discharges in Akgeuncheon stream has regularly been made with ADCP and ADC and Flowmate every two weeks for twenty-two (22) months (July 8, 2011 to April 27, 2013). This paper represent the results of calculating discharge of a number of hydraulic structures (broad-crested weirs) with comparing and has been calculated more accurate discharges with suitability of different observation methods. The average discharge has been observed 0.851 $m^3/s$, whereas the average ADC and Flowmate is 0.709 $m^3/s$. Meanwhile, stream discharge has been calculated 0.709 $m^3/s$ through the broad-crested weir equation. The discharge has calculated with the weir equation greatly changed according to even a small change in the water level. However, it showed a similar trend to one of the observed discharge. Although, in past there were generating errors caused by observers' strides, vertical and horizontal flow velocity distribution when the average flow velocity had been measured, non-prismatic flow, turbulent flow and others in ADC. This study comes up with the weir equation is more suitable for the characteristics of Jeju-do could be presented through an observations of baseflow discharge.

• Korean Journal of Metals and Materials
• /
• v.46 no.12
• /
• pp.771-779
• /
• 2008

An effective way of increasing the strength and fracture toughness of reactor pressure vessel steels is to change the material specification from that of Mn-Mo-Ni low alloy steel(SA508 Gr.3) to Ni-Mo-Cr low alloy steel(SA508 Gr.4N). In this study, we evaluate the effects of alloying elements on the microstructural characteristics of Ni-Mo-Cr low alloy steel. The changes in the stable phase of the SA508 Gr.4N low alloy steel with alloying elements were evaluated by means of a thermodynamic calculation conducted with the software ThermoCalc. The changes were then compared with the observed microstructural results. The calculation of Ni-Mo-Cr low alloy steels confirms that the ferrite formation temperature decreases as the Ni content increases because of the austenite stabilization effect. Consequently, in the microscopic observation, the lath martensitic structure becomes finer as the Ni content increases. However, Ni does not affect the carbide phases such as $M_{23}C_6 $ and $M_7C_3$. When the Cr content decreases, the carbide phases become unstable and carbide coarsening can be observed. With an increase in the Mo content, the $M_2C$ phase becomes stable instead of the $M_7C_3$ phase. This behavior is also observed in TEM. From the calculation results and the observation results of the microstructure, the thermodynamic calculation can be used to predict the precipitation behavior.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.26 no.1
• /
• pp.63-74
• /
• 2024

In agriculture, frost can be devastating, which is why observation and forecasting are so important. According to a recent report analyzing frost observation data from the Korea Meteorological Administration, despite global warming due to climate change, the late frost date in spring has not been accelerated, and the frequency of frost has not decreased. Therefore, it is important to automate and continuously operate frost observation in risk areas to prevent agricultural frost damage. In the existing frost observation using leaf wetness sensors, there is a problem that the reference voltage value fluctuates over a long period of time due to contamination of the observation sensor or changes in the humidity of the surrounding environment. In this study, a datalogger program was implemented to automatically solve these problems. The established frost observation system can stably and automatically accumulate time-resolved observation data over a long period of time. This data can be utilized in the future for the development of frost diagnosis models using machine learning methods and the production of frost occurrence prediction information for surrounding areas.

• Korean Institute of Interior Design Journal
• /
• v.25 no.5
• /
• pp.71-81
• /
• 2016

This research has been carried out with the objects of sporting goods shops to find out what structure of those shops raises more interest from customers. The tracking eyes on the objects which are the same but seen to have different structures has revealed the followings. Customers' visual appreciation of Reverse left/right Images (11.1) was found to be higher than that of Original Images (10.6). Furthermore, the reverse left/right image of the space also was found to attract more interest from customers, which led them to have longer observation. The below is about the interpretation of the spatial exploration by observation time and the appreciation of its visual content in line with the experiment objects of selling spaces. The longer the space was observed, (1)the higher the expansive searching of space was, (2)the more spots were observed as if they did not know what to see after they first observed at early hours, (3)later (in the time range of 64~73 seconds) they came to look at the spots in which they got interested, (4)and then again they suddenly got lost what to see. When the change of observation characteristics by time range is reviewed, it can be seen that the searching of original images is changed from Divergent Feature to Convergent Feature when the observation time increases from the early stage of observation to the later. On the contrary, the reverse left/right images were found to have the opposite searching features, that is, from convergent exploration to divergent exploration. These findings show that the reverse left/right images of the sporting goods shops, which were the experiment objects, have more factors attracting customers' attention and interest and that it is the very shop-structure which makes customers have better visual appreciation of those shops.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.5
• /
• pp.521-531
• /
• 2011

This paper presents the variable perturbation and observation(VPO) maximum power point tracking(MPPT) control of the photovoltaic(PV) system considering the shadow influence. The output characteristics of the solar cell is a nonlinear and affected by a temperature, the solar radiation and influence of a shadow. MPPT control is a very important technique in order to increase an output and efficiency of the solar power generation. Conventional perturbation and observation(PO) and incremental conductance(IC) are the method finding MPP by the continued self-excitation vibration. The MPPT control is unable to be performed by rapid output change affected by the shadow. To solve this problem, this paper proposes the VPO MPPT algorithm which changes step size according to output variation. The response characteristics of VPO MPPT algorithm proposed in this paper compares with response characteristics of conventional MPPT algorithm about the radiation, temperature and shadow influence. The validity of the algorithm proposed in this paper prove through the results of the comparisons.