• Textile Coloration and Finishing
• /
• v.34 no.2
• /
• pp.127-133
• /
• 2022

With the increasing interest in the expression of individuality and appearance of modern people, it is time to conduct research and development of novel hair coloring from various angles. Therefore, taking into account the order of discoloration of hair pigments, we selected a creative and novel emulsion as a novel material for hair coloring, rather than a cosmetic material such as hot water extract using natural products dealt with in previous studies, commercially available hair manicure, and oxidation hair dye for hair. Thus, the change in tensile strength and elongation of hair samples by color was studied. As a result of the study, hair with green emulsion paint had a significantly higher maximum load, maximum stress, maximum elongation and breaking load, breaking stress, breaking elongation values are shown. Maximum in terms of modulus, green emulsion applied hair and the control group were higher in the 0-15s strain and 15-145s sections, respectively, and the tangential modulus value was much higher in the control group than the experimental group hairs in all the 0-145s sections. This study, which analyzes the dynamic changes of hair samples that extend the daily color gamut, will greatly contribute to the development of innovative hair coloring materials in the research and production of hair beauty works, and it is judged that it will also contribute to the development of the beauty industry.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.7 no.2
• /
• pp.121-135
• /
• 2005

From a social psychological perspective, Make-up is an tool for run a lot smoother and perform communication efficiently. Many people give a turn to hair color through dyeing form due to yearning to change individual image through the image which the color is having. This paper study how make-up behavior, hair color and self-consciousness will affect the Level of Expected social-psychological effect of College Girl Students. In the sense of make-up behavior, according to result, a group of make-up behavior of self-satisfaction-oriented the level of expected social-psychological effect higher than a group of make-up behavior of tradition-oriented. Hair colors doesn't seem to be having much effect on the level of expected social- psychological effect, but have been shown to influence make-up behavior and self-consciousness. On the self-consciousness, a group of high self-consciousness the level of expected social-psychological effect higher than a group of low or fair self-consciousness. They doesn't have much effect passive expected effect as 'complement of self insufficiency' or 'a person consciousness' But they are affect active expected effect as 'the pleasure of change' and 'positive ascent'.

• Applied Chemistry for Engineering
• /
• v.34 no.6
• /
• pp.660-664
• /
• 2023

In this study, a new system to determine the concentration of cholesterol using a color change was developed. The system comprised diacetylene vesicles and cholesterol oxidase (ChOx). 10,12-Pentacosadiynoic acid (PCDA) was used as the diacetylene compound, and PCDA vesicles were formed using sonication. The H₂O₂ produced during the reaction between cholesterol and ChOx was used to initiate the polymerization of the PCDA in the vesicles. During polymerization, the vesicles changed from colorless to blue. Therefore, the cholesterol concentration was proportional to the intensity of the blue color. The absorption at 665 nm indicated that the blue color was directly proportional to the cholesterol concentration. This indicates that the system can be used for cholesterol detection. The minimum cholesterol concentration detected using this system was 1.0 mM.

• The Korean Journal of Community Living Science
• /
• v.16 no.1
• /
• pp.65-72
• /
• 2005

To increase dyeability of cotton fabric to the chestnut shell dyeing, we had several dyeing experiments with the experimental fabrics which was pre-treated by soybean, NaOH, KOH. Three kinds of experimental cotton fabrics were used and chestnut shell dyebath was made for the experiment. Munsell's color HV/C and color differences ΔE of dyeing fabrics were compared between pre-treatment and none pre-treatment dyeing fabrics. The main results were as follows ; Color differences of dyeing fabrics pre-treated with soybean, NaOH, KOH were higher than those of none pre-treated dyeing fabrics. In case of pre-treatment with soybean, the concentration of the soybean bath affected the color differences but not affected in case of pre-treatment with NaOH & KOH. Munsell's color of pre-treatment fabrics with soybean, NaOH, KOH were same with the none pre-treatment fabrics. Colorfastness of the pre-treated fabrics were same degree, but only in case of soybean pre-treated fabrics were low in fastness of washing(change) & perspiration(acidic change).

• The Journal of Advanced Prosthodontics
• /
• v.15 no.5
• /
• pp.238-247
• /
• 2023

PURPOSE. The purpose of this study was to assess the effect of resin cement shade on the color of different novel ultratranslucent monolithic zirconia and lithium disilicate veneer materials. MATERIALS AND METHODS. For a total of 40 specimens, flat cylindrical discs with a 9-mm diameter and 0.5-mm thickness were created using CAD/CAM technology. The specimens were divided into five groups according to their material (n = 8) (e.max, Prettau, Aidite, Shofu and Dima) using A1 shade. Resin discs with the same diameter and shade as the specimens served as tooth-colored substructures. Three shades (neutral, light and warm) of resin cement try-in pastes (Variolink Esthetic LC) were used as the luting cement material. The color of each material group was measured before and after cementation using the three cement shades, and the CIE L^*a^*b^* coordinates were obtained with a spectrophotometer. Values for the translucency parameter (TP) and color change delta E (E) before (baseline) and after cementation of each specimen were determined. To compare differences among the material groups within each shade of cement and among various shades of cement within each material, the data were analyzed using one-way ANOVA and post hoc testing. RESULTS. Color coordinates L^*, a^* and b^* significantly changed after the application of try-in pastes relative to baseline values, with a noticeable decrease in lightness (L^*) (P < .05). A significant color change (ΔE) was observed in all tested materials after cementation, with ΔE values exceeding 3.3 (P < .05). Although TP changed after cementation for most materials tested, these changes were not statistically significant (P > .05). Shofu and Dima ceramics showed the lowest TP values, while Aidite and Prettau showed the highest TP values. For e.max, translucency decreased after cementation with neutral and warm shades, and it significantly increased after cementation with a light shade. CONCLUSION. The shade of cement significantly altered the final color of the ceramic veneer material to a level above the threshold at which the clinical perception of color change occurred (> 3.3). The TP was not influenced by the cement shade. The translucency levels of the novel ultratranslucent multilayer monolithic zirconia ceramics Aidite and Prettau were higher than that of the lithium disilicate e.max material.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.1
• /
• pp.1-9
• /
• 2013

The experimental study of the white LED lighting focused on the readability in interior space according to age group is conducted realizing importance of the lighting environment and necessity of lighting study depending on the user situation. The results of study represent that a teenager does not show sensitive reaction to change of the color temperature and illuminance. The people in 20s and 30s prefer neutral white LED lighting and are very sensitive to change of the light environment. The people in 50s and 60s prefer high illumination and cool white LED lighting series. People of all ages highly appraise 6000K of 700 lux and 4000K in the illuminance range of 700 lux to 1000 lux for readability. The white LED lighting of color temperature 4000K is estimated as a suitable environment for readability in a wide range of illumination.

• The Research Journal of the Costume Culture
• /
• v.18 no.4
• /
• pp.640-654
• /
• 2010

The purpose of this study is to design neckties that are motivated by Christmas symbol images that have been known to public most widely in the basis of Day marketing so as to develop the competitive commodities closed to consumers' emotion in the fashion industry. As a method of this study were to use Adobe Illustrator CS2, which is one of the vector graphic programs, to present the motif design such as Santa Claus, trees, presents and letters among Christmas symbols, and are to apply to neckties by giving a change with striped pattern, all over pattern and one point pattern. The results are as follows; Firstly, Santa Claus image was expressed by color contrast with red and white, which was perceived by red, green and white that are mostly used in Christmas. Secondly, tree images are expressed abstractly with color contrast where red and green are contrasted, and color way change was given for symbol color of Christmas. Third, in the image of gift, the image of share and image of colorfulness were considered for expression by making motifs of three dimensional hexahedron shape. Fourthly, in the image of type, motif was expressed by giving a change in horizontal and vertical writing types.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.74-77
• /
• 2006

The purpose of this study is to investigate the relation between color change and residual compressive strength in concrete exposed to high temperature. In order to study the color image analysis, the specimens have been tested with variables of concrete strengths(20Mpa, 40Mpa, 60Mpa) in transient heating conditions($800^{\circ}C$ heating and 2 hour preservation). The results show that the residual strength of specimens are coincident with the full development of the pink/red color and the method may be used to define the distance from a heated surface where strength degradation has occurred.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2001.05a
• /
• pp.300-310
• /
• 2001

In this paper, new gamut-mapping algorithm (GMA) that utilizes variable anchor points (center of gravity on the luminance axis) is proposed. The proposed algorithm increases luminance range, which is reduced from conventional gamut mapping toward an anchor point. In this process, this algorithm utilizes multiple anchor points with constant slopes to both reduce a sudden color change on the gamut boundary of the printer and to maintain a uniform color change during the mapping process. Accordingly, the proposed algorithm can reproduce high quality images with low-cost color devices.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.4
• /
• pp.371-380
• /
• 2001

In this paper, lightness mapping for uniform color distribution and gamut mapping for maximum chroma reproduction are proposed. In the conventional lightness mapping, the average lightness difference between the two gamut is increased and different color changes in bright and dark regions are also increased. To solve these problems, a lightness mapping is proposed that minimizes the lightness difference of the cusps at each hue angle and produces same color changes in bright and dark regions. Also, gamut mapping that utilize variable anchor point and an anchor point are proposed for maximum chroma reproduction and uniform color change. Accordingly, the proposed algorithm can reproduce high quality images with low-cost color devices.