• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.647-654
• /
• 2000

During consolidation, the permeability of clay decreases with void ratio because of the reduction in total void space. After Kozeny(1927) and Carman(1956), many researchers have proposed the relations between void ratio and permeability. Most of the relations are expressed in the following forms as : (1) log e - log k(1+e), (2) e - log k, or (3) log e - log k. These relations have been found valid for a large number of normally consolidated clays. From laboratory test(CRS and I $L_{CON}$) results, the relation between void ratio and permeability of Kimhae clay was well defined in all of the three forms. Permeability change index, $C_{k}$, of Kimhae clay was in the range of 0.64~1,03 and average value of $C_{k}$ was 0.821. And the test results satisfied the experimental correlation between $C_{k}$ and e, $C_{k}$=0.5e. In log e - log k(1+e) relation, constant C was in the range of 1.91~4.74$\times$10$^{-8}$ cm/sec and n was in the range of 3.74~4.60.c and n was in the range of 3.74~4.60.74~4.60.0.

• Communications for Statistical Applications and Methods
• /
• v.9 no.1
• /
• pp.75-86
• /
• 2002

We consider the problem of estimating the change-point in mean change model with one change-point. Gombay and Huskova(1998) derived a class of change-point estimators with the score function of rank. A change-point estimator with the log score function of rank is suggested and is shown to be involved in the class of Gombay and Huskova(1988). The simulation results show that the proposed estimator has smaller rose, larger proportion of matching the true change-point than the other estimators considered in the experiment when the change-point occurs in the middle of the sample.

• Journal of Magnetics
• /
• v.3 no.4
• /
• pp.127-133
• /
• 1998

I have overviewed the change in GMR on annealing, in conjunction with the change in microstructure. The Co46Al19O35 granular thin films were annealed at 30$0^{\circ}C$ for various annealing time to change the microstructure. The magnitude of GMR decreases considerably with increasing annealing time, although the size of Co granules estimated from TEM observation show a small change. Parameter fits of magnetization curves and magnetoresistance curves to the Langevin function suggest that large clusters consisting of several small Co granules, which are coupled ferromagnetically, are related with the decrease of GMR on annealing. The temperature dependence of electrical resistivity ($\rho$) shows the relationship of log $\rho$ versus $T^{-1/2}$ for the sample annealed for 10 min., 1 hr. and 6 hrs. However, the sample annealed for 38 hrs. shows the relationship of log $\rho$ versus$ T^{-1/4},$ which represents a significant change in the transport mechanism.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.633-635
• /
• 2022

If an error occurs during operation of the video wall controller, the control system creates a log file and records the log. In order to minimize the load on the system due to log recording, the log level is set so that the log is not recorded as much as possible under normal operating conditions. When an error occurs, detailed logs are recorded by changing the log level to analyze and respond to the cause of the error. So work efficiency is reduced, and operator intervention is inevitable to change the log level. In this paper, we propose a model that automatically sets the log level according to the operating situation using Contextual Bandit.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.3
• /
• pp.118-123
• /
• 1999

Hough transform is well employed to retect or recognize the lines in image processing or in computer vision. Curve of the logarithm of ranges against the bearing does not change its shape according to data trints. This fact suggests that calculation cost can be remarkably reduced. An effective line detection algorithm is represented.sented.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.12
• /
• pp.59-67
• /
• 1991

In this paper, we aimed to develop associative pattern recognizer based on neural network for aircraft identification. For obtaining invariant feature space description of an object regardless of its scale change and rotation, Log-polar sampling technique recently developed partly due to its similarity to the human visual system was introduced with Fourier transform post-processing. In addition to the recognition results, image recall was associatively performed and also used for the visualization of the recognition reliability. The multilayer perceptron model was learned by backpropagation algorithm.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.565-573
• /
• 2004

This study is to present explicit analytical expressions for calculating bearing capacity factor $N_{\gamma}$, to provide results of the numerical computation instead of the graphical method. In this study, $N_{\gamma}$ is proposed in the critical failure surface on assumption that the center of log spiral in the radial shear zone can be located at the any points of around footing. The critical failure surface is one which yields minimum passive pressure $P_{\gamma}$ on the radial shear zone from the family of log spirals accoding to change of the center of log spiral. This study adoptes Terzaghi's bearing capacity principle(e.g., Prandtl's mechanism, limit equilibrium equation, superposition principle) but the soil wedge in an elastic zone makes angle $45^{\circ}+{\phi}/2$ with the horizontal and the location of the log spiral's center.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.2
• /
• pp.184-193
• /
• 1994

This paper considers the Updating Minimum-weight Spanning Tree Problem(UMP), that is, the problem to update the Minimum-weight Spanning Tree(MST) in response to topology change of the network. This paper proposes the algorithm which reconstructs the MST after several links deleted and added. Its message complexity and its ideal-time complexity are Ο(m＋n log(t＋f)) and Ο(n＋n log(t＋f)) respectively, where n is the number of processors in the network, t(resp.f) is the number of added links (resp. the number of deleted links of the old MST), And m=t＋n if f=Ο, m=e (i.e. the number of links in the network after the topology change) otherwise. Moreover the last part of this paper touches in the algorithm which deals with deletion and addition of processors as well as links.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.2
• /
• pp.299-306
• /
• 1999

Considers the problem to update the spanning tree and strongly-connected components in response to topology change of the network. This paper proposes a distributed algorithm that solves such a problem after several processors and links are added and deleted. Its message complexity and its ideal-time complexity are O(n'log n'+ (n'+s+t)) and O(n'logn') respectively where n'is the number of processors in the network after the topology change, s is the number of added links, and t is the total number of links in the strongly connected component (of the network before the topology change) including the deleted links.

• Korean Management Science Review
• /
• v.20 no.2
• /
• pp.1-16
• /
• 2003

Previous research on data extraction and integration for data warehousing has concentrated mainly on the relational DBMS or partly on the object-oriented DBMS. Mostly, it describes issues related with the change data (deltas) capture and the incremental update by using the triggering technique of active database systems. But, little attention has been paid to data extraction approaches from other types of source systems like hierarchical DBMS, etc. and from source systems without triggering capability. This paper argues, from the practical point of view, that we need to consider not only the types of information sources and capabilities of ETT tools but also other factors of source systems such as operational characteristics (i.e., whether they support DBMS log, user log or no log, timestamp), and DBMS characteristics (i.e., whether they have the triggering capability or not, etc), in order to find out appropriate data extraction techniques that could be applied to different source systems. Having applied several different data extraction techniques (e.g., DBMS log, user log, triggering, timestamp-based extraction, file comparison) to S bank's source systems (e.g., IMS, DB2, ORACLE, and SAM file), we discovered that data extraction techniques available in a commercial ETT tool do not completely support data extraction from the DBMS log of IMS system. For such IMS systems, a new date extraction technique is proposed which first creates Index database and then updates the data warehouse using the Index database. We illustrates this technique using an example application.