• Korean Journal of Animal Reproduction
• /
• v.16 no.1
• /
• pp.39-46
• /
• 1992

In viro fertilizatin is very important in both human clinical practice and animal breeding. However, the success rate of in vitro fertilization is not high. The purpose of this study ws to determine wheter in the vitro fertilization and culture of porcine oocyte using a hydrogel chamber were possible or not. Hydrogel chambers were made of polymerized 2-hydroxyethyl methacrylate. Matured follicular oocytes in Waymouth's medium and T L Hepes medium, tubal oocytes, and preincubated sperm in M199 medium were treansferred into the lumen of the hydrogel chambers. The chambers containing porcine oocytes and spermatozoa implanted into the mouse peritioneal cavity, and ova were examined after the recovery of the chambers at 84 hours after preservation start. The result was shown that fertilization and culture of porcine oocytes were successfully achieved inside of the hydrogel chamber.

• Journal of Ocean Engineering and Technology
• /
• v.36 no.1
• /
• pp.21-31
• /
• 2022

In recent years, various studies have been conducted on oscillating-water-column-type wave energy converters (OWC-WECs) with multiple chambers with the objective of efficiently utilizing the limited space of offshore/onshore structures. In this study, a numerical investigation based on a numerical wave tank was conducted on single, dual, and triple OWC chambers to examine the hydrodynamic performances and the energy conversion characteristics of the multiple water columns. The boundary value problem with the Laplace equation was solved by using a numerical wave tank based on a finite element method. The validity of the current numerical method was confirmed by comparing it with the measured data in the previous experimental research. We undertook a series of numerical simulations and observed that the water column motion of sloshing mode in a single chamber can be changed into the piston motion of different phases in multiple OWC chambers. Therefore, the piston motion in the multiple chambers can generate considerable airflow at a specific resonant frequency. In addition, the division of the OWC chamber results in a reduction of the time-dependent variability of the final output power from the device. As a result, the application of the multiple chambers leads to an increase of the energy conversion performance as well as a decrease of the variability of the wave energy converter.

• Journal of Embryo Transfer
• /
• v.4 no.1
• /
• pp.21-27
• /
• 1989

Hydrogel chambers made from polymerized 2-hydroxyethyl methacrylate were used for in chamber fertilization. To determine whether sperm motility was preserved in the Hydrogel chamber, chambers which have rabbit sperm or frozen-thawed bovine sperm were transplanted inside of mouse peritoneal cavity and sperm were observed after recovering the chambers in the due time. As a result, it was determined that preservation of sperm motility was good. To determine whether in chamber fertilization was possible, chambers which have rabbit oocytes and sperm were transplanted inside of mouse peritoneal cavity and eggs were observed after recovering the chambers at 84 hr of preservation. As a result, the fact that fertilization and culture was occurred inside of the chamber was determined.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.2
• /
• pp.41-47
• /
• 2014

Experimental results are given for the vertical motion of water in the water chambers for wave energy converter aligned along the wave propagation direction in order to avoid the impulsive wave forces. This paper mainly focuses on the property of the amplitude of the vertical motion of the water surface in the chambers. The amplification has been investigated by dimensionless parameters of wave period to resonance period ratio of the U-shaped oscillation, $T/T_r$, chamber size to wave length ratio, l/L, water depth to wave length ratio, h/L, amplitude of up-down motion of water particles to draft of the front wall ratio, ${\zeta}/D$. It has been shown that l/L should be less than 0.1 and as $T/T_r$ approaches unity the up-down of the water in the chambers is amplified. Also, the structure of the walls which form th water chambers has been examined roughly. It is deduced that the chambers set on both sides of the hull of a single-point moored floating vessel is preferable to those set along a fixed structure such as breakwaters.

• Asia-Pacific Journal of Business
• /
• v.2 no.1
• /
• pp.1-22
• /
• 2011

Chamber of commerce and industry plays important role for development of business community and creating vibrant competition. Present paper compares chambers operations in Bangladesh, especially, Sylhet Chamber of Commerce and Industry(SCCI) by reviewing global models of chambers practices. The study identifies important gaps between international standards and Bangladesh practices. Mostly practiced chambers model in the world are: Continental Model, Anglo-Saxon Model and Mixed model or Asian model. Like other Asian countries, chambers in Bangladesh including SCCI, have been following Mixed Model. The empirical study found that SCCI is performing different developmental functions like accumulating members, collecting revenue, fulfilling corporate social responsibility and providing business development services to its members and business community. The notable constraining factors of SCCI operations are: short term orientation in assembling members, limited functional activities, lack of creative endeavors in diversifying services, linkage between SCCI and academic institutions, poor research involvement etc. The necessary suggestions for improvement of chambers performance include adoption of creative measures in various operations, providing training to the members, assisting entrepreneurs in obtaining industrial finance and extending support in the establishment of specialized industrial zone for attaining long term developmental objectives.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.1
• /
• pp.37-44
• /
• 1996

Water hammer pressure waves were measured in a simplified water piping system with and without arresters and air chambers by the operations of the solenoid valve. Experiments were performed to investigate the effects of the location of the arresters and the effects of the volume of the air chambers on maximum and minimum water hammer pressures and wave frequency for various flow rates.

• Journal of Food Hygiene and Safety
• /
• v.38 no.1
• /
• pp.26-30
• /
• 2023

In this study, we analyzed the microbial contamination level of ultraviolet sterilizer (UVS) chambers and suggested plans to improve hygiene management. In this study, UVS chambers targeted 98 UVS in some childcare centers in Jeollanam-do, Korea. Total aerobic bacteria and coliform bacteria were tested according to the Korean Food Code. Of the 98 UVS chambers, total aerobic bacteria were detected in 67 (68.4%) and coliform bacteria in 5 (5.1%). Six kinds of food-poisoning bacteria, including Salmonella spp., were not detected, but Bacillus cereus was detected in 1 (2.8%) out of 98 UVS chambers. According to the UV lamp replacement period, the detection rate of total aerobic bacteria was 3 (50%) out of 6 UVS within 3 months, 3 (60%) out of 5 UVS in 3 to 6 months, and 61 (70.1%) out of 87 UVS over 6 months. The detection rate of coliform bacteria according to the UV lamp replacement period was not detected within 6 months, however, they were detected in 5 (5.7%) out of 87 chambers after more than 6 months. The level of microbial contamination in the UVS chambers was higher as the lamp replacement period was longer. Considering these results, it was determined that the UVS chambers should be kept dry and clean, and the UV lamp should be replaced periodically. In addition, it is necessary to provide the staff catering for childcare centers with continuous education regarding the cleaning of UVS chambers and the replacement of UV lamps.

• Structural Engineering and Mechanics
• /
• v.49 no.3
• /
• pp.311-327
• /
• 2014

The safety relating to leakage of water and pitch instability of ship chambers of the full balanced hoist vertical shiplifts has been the focus of adoption of the type of vertical shiplifts. This paper aims to remove the doubts through theoretical and engineering researches. The leakage and pitch stability of ship chambers of full balanced hoist vertical ship lifts are investigated on the basis of theoretical analysis and exploration of engineering measures. Regarding the issue of leakage of ship chambers, a mathematical model on leaking process is built and corresponding formula and coping measures are obtained which can be applied in control program of ship lifts by linking with monitoring. The concept of safety grade is put forward to seek the best technical and economic index and the corresponding technical measures are for different grades of ship lift is suggested. For the issue of pitch instability, a methodology of combining theoretical deduction and summary of achievements of design and operation of the type of the full balanced hoist shiplifts is adopted, and the formula for design about pitch stability of ship chambers is derived.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.97-103
• /
• 2002

Vibration isolation technology using an air spring and laminated rubber bearing is widely used because it has excellent vibration isolation characteristics. In the part of that, we usually make use of the self-damped air suing. It is occupied two chambers, restrictor, diaphragm and load plate. Two chambers contain compressed air and the volume of chambers and the area of load plate give a definition of stiffness and load. The restrictor and the volume ratio of two chambers give a definition of damping ratio. The conventional model of restrictor is made of one orifice and it causes turbulent flow in the orifice at the region of large deflection. The stillness of air suing is larger and the damping is lower in the region of large deflection. In the multi-orifice case, the stiffness is similar to air spring with one orifice but damping ratio is larger than conventional air spring. And damping ratio is smaller than conventional air suing in small deflection region. Deflection is small in the region of high frequency so small damping is better than large damping. As a result, we can reduce the storage stiffness of air suing in the wide region of deflection and increase the damping ratio in the region of large deflection. After this, we will try to and the relation of Reynolds Number and Flow Resistance then we are going to make another restrictor for air spring to improve damping ratio and stiffness.

• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.806-810
• /
• 2009

The air conditioner system that is used in large structure, such as hospital, hotel, railway platform and train generate a high level noise generally. A chamber with sound absorbing materials, such as glass wool and polyurethane foam, are installed in this system to reduce the noise. However, these chambers cause environmental problems owing to the sound absorbing materials recently. Therefore, we develop noise chamber a built-in perforated panel resonance system as eco-friendly chamber to solve this problems. This noise chambers show the same noise reduction performance as the current chambers in the range above 500Hz. But, it reduces the noise up to 8dB(A) comparison to the current chambers in the range 200Hz~400Hz.