• 상하수도학회지
• /
• 제13권3호
• /
• pp.56-60
• /
• 1999

In this study the feasibility of usage of raw sludge (sludge from water treatment plant) and chalk from schools and institutes was investigated to remove the phosphorus in water and wastewater. In this study phosphorus removal efficiencies of sludge and chalk were investigated by changing various factors. The time to reach the equilibrium using chalk and raw sludge under different pHs was obtained. Based on this result, Freudlich adsorption isotherm was applied. Results showed that a portion of phosphorus was removed by adsorption to chalk and raw sludge. The phosphorus removal efficiency using calcinated chalk was about three times higher than that of chalk. It means that some portion of $CaCO_3$ contained in chalk was converted to CaO by calcination and this was proved by X-ray diffraction experiment. About 90% phosphorus removal was observed using sludge and calcinated chalk respectively while about 20% phosphorus removal efficiency was achieved using chalk from the water sample in Lake Sihwa.

• 원자력산업
• /
• 제17권11호통권177호
• /
• pp.78-85
• /
• 1997

• 보존과학연구
• /
• 통권31호
• /
• pp.79-88
• /
• 2010

Paper cultural heritages experience chemical and physical deterioration due to various factors including preservation environments and the property of paper materials1). Thus, it is important to develop optimal preservation and restoration methods for the damaged paper cultural heritages. Currently, lining is a popular treatment for the restoration of paper cultural heritages in Korea. Since lining paper is a layer of paper directly attached to the inside of cultural heritages for protection, understanding of the preservation properties of lining paper is primarily needed in order to devise the better preservation methods. The main material of lining paper is the paper mulberry, but additives such as chalk and white clay is sometimes used to enhance the preservation properties of lining paper. To date, the properties of the functional lining paper containing these additives have been not fully understood yet. In this study, dry heating aging at $105^{\circ}C$ and biological aging by the Aspergillus versicolor and Penicillium polonicum for the lining paper, which is made from paper mulberry and the chalk, are carried out to evaluate changes in their preservation properties by these aging factors. As a result, it is found that the functional lining paper containing 25.1% of chalk can control the growth of fungi, while the paper containing 32.7% of chalk do not show any protection effect. However, the functional lining paper added by chalk is more aged than the lining paper made from paper mulberry by dry heating accelerated aging.

• 상하수도학회지
• /
• 제12권2호
• /
• pp.59-66
• /
• 1998

The feasibility of usage of sludge from water treatment plant and chalk from schools and institutes was investigated to remove the phosphorus in the lakes which induce the eutrophication every year. In this study phosphorus removal efficiencies of sludge and chalk were investigated by changing various factors. Higher phosphorus removal efficiency using larger particle size of chalk was observed which means that the surface area is not an important factor in removing phosphorus in aqueous phase. The proper shaking time and temperature were 2 hours and $25^{\circ}C$, respectively. The removal efficiency using sludge from water treatment plant was almost 100%, which is similar to those of CaO and $Ca(OH)_2$. It means that sludge can be reused in removing phosphorus. It was also found that chalk was better in removing phosphorus under alkaline condition and sludge was better under acidic condition. About 75% phosphorus removal efficiency was observed using sludge from the water sample in Lake Sihwa.

• 한국물환경학회지
• /
• 제18권2호
• /
• pp.213-220
• /
• 2002

In this study the effects of initial pH, temperature, dissolved oxygen concentration, and sediment depth on the release of phosphorus from sediment in Lake Sihwa were investigated. No phosphorus release occurred at $10^{\circ}C$ for all pH values. DO concentrations were decreased and equilibrium was obtained 4-8 days after phosphorus release started. The DO concentrations were less than 1 mg/L. Sediment depth had little effect on phosphorus release rate. In order to control the released phosphorus, raw sludge and chalk were used. Results showed that a portion of phosphorus was removed by adsorption to chalk and raw sludge. About 90 % phosphorus removal was observed using sludge and calcinated chalk from the water sample in Lake Sihwa.

• 한국환경보건학회지
• /
• 제13권1호
• /
• pp.59-62
• /
• 1987

This study was carried out to determine the content of heavy metals in chalks. Samples were collected from 5 manufacturing companies of chalk. The content of lead and cadmium were analyzed by flame atomic absorption spectrophotometer. The results obtained were as follows: 1. The average content of lead was 22.0 ppm, and the range 6.4 - 50.9 ppm. 2. The average content and the range were 4.1 ppm and 2.8 - 4.8 ppm respectively.

• 대한수의사회지
• /
• 제25권2호
• /
• pp.89-95
• /
• 1989

• Nuclear Engineering and Technology
• /
• 제41권7호
• /
• pp.969-978
• /
• 2009

The ASSERT-PV subchannel code developed by AECL has been applied as a design-assist tool to the advanced $CANDU^{(R)1}$ reactor fuel bundle. Based primarily on the $CANFLEX^{(R)2}$ fuel bundle, several geometry changes (such as element sizes and pitch-circle diameters of various element rings) were examined to optimize the dryout power and pressure-drop performances of the new fuel bundle. An experiment was performed to obtain dryout power measurements for verification of the ASSERT-PV code predictions. It was carried out using an electrically heated, Refrigerant-134a cooled, fuel bundle string simulator. The axial power profile of the simulator was uniform, while the radial power profile of the element rings was varied simulating profiles in bundles with various fuel compositions and burn-ups. Dryout power measurements are predicted closely using the ASSERT-PV code, particularly at low flows and low pressures, but are overpredicted at high flows and high pressures. The majority of data shows that dryout powers are underpredicted at low inlet-fluid temperatures but overpredicted at high inlet-fluid temperatures.

• Nuclear Engineering and Technology
• /
• 제45권7호
• /
• pp.839-846
• /
• 2013

This paper describes a finite element model of the microstructure of dispersion type nuclear fuels, which can be used to determine the effective thermal conductivity of the fuels during irradiation. The model simulates a representative region of the fuel as a prism shaped unit cell made of brick elements. The elements within the unit cell are assigned material properties of either the fuel or the matrix depending on position, in such a way as to represent randomly distributed fuel particles with a size distribution similar to that of the as manufactured fuel. By applying an appropriate heat flux across the unit cell it is possible to determine the effective thermal conductivity of the unit cell as a function of the volume fraction of the fuel particles. The presence of a fuel/matrix interaction layer is simulated by the addition of a third set of material properties that are assigned to the finite elements that surround each fuel particle. In this way the effective thermal conductivity of the material may also be determined as a function of the volume fraction of the interaction layer. Work is on going to add fission gas bubbles in the fuel as a fourth phase to the model.

• Nuclear Engineering and Technology
• /
• 제40권2호
• /
• pp.107-116
• /
• 2008

The present paper describes the preliminary compilation, assessment and examination of the supercritical heat transfer(SCHT) database. The availability and reliability of the SCHT data are discussed. Similarities in thermodynamic supercritical properties and SCHT behaviour of water, $CO_{2}$ and R-134a have been examined and some tentative conclusions are made. Finally, the future experimental and analytical program at the University of Ottawa is described.