• Communications for Statistical Applications and Methods
• /
• v.24 no.3
• /
• pp.211-226
• /
• 2017

The chain-ladder method, for which run-off data is employed is popularly used in the rate-adjustment and loss-reserving practices of non-life-insurance and health-insurance companies. The method is applicable when the underlying assumption of a consistent development pattern is in regards to a cumulative loss payment after the occurrence of an insurance event. In this study, a modified chain-ladder algorithm is proposed for when the assumption is considered to be only partially appropriate for the given run-off data. The concept of a structural-change point in the run-off data and its reflection in the estimation of unpaid loss amounts are discussed with numerical illustrations. Experience data from private health insurance coverage in Korea were analyzed based on the suggested method. The performance in estimation of loss reserve was also compared with traditional approaches. We present evidence in this paper that shows that a reflection of a structural-change point in the chain-ladder method can improve the risk management of the relevant insurance products. The suggested method is expected to be utilized easily in actuarial practice as the algorithm is straightforward.

• Asian Journal of Business Environment
• /
• v.13 no.4
• /
• pp.1-6
• /
• 2023

Purpose: To explore the application prospect of support vector machine (SVM) in supply chain management and its practical application in supply chain performance evaluation practice. Research design, data and methodology: This paper establishes the performance evaluation index system of supply chain management according to the balanced scorecard (BSC) theory, and establishes the SVM model of supply chain management performance evaluation based on the SVM principle. Results: The performance evaluation results of the supply chain of an electric power equipment Co., Ltd. in Harbin established by using the model are consistent with the actual situation, which indicates the nature and accuracy of the possible reflection of the established supply chain performance evaluation model. Conclusions: The results show that SVM model can be used to evaluate enterprise supply chain management performance indicators, and can improve enterprise supply chain management performance, thus demonstrating the effectiveness of the model.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.3
• /
• pp.187-196
• /
• 2004

By successful establishment of Supply Chain Management System they should make the supply chains speedy and combine production information system with the outcome system and thus they reinforce the competition of the production system of local enterprises in accordance with the rapid decision making. Supply chain coordination improves if all supplier of chain take actions that together increase total supply chain profits. To design of Modularity by the grouping supplier, the proposed method is to develop the most appropriate production system models through the reflection of JIT system in the Supply Chain Management which is necessity of the times and its importance. The objects of this study is to develop the most appropriate production system Model and optimal profit model in the process line and to provide the enterprises with the models which are based on the Supply Chain Management.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.422-427
• /
• 2006

This paper presents force-feedback control performance of a haptic device in virtual environment of minimally invasive surgery(MIS). As a first step, based on an electrorheological(ER) fluid and spherical geometry, a new type of master device is developed and integrated with a virtual environment of MIS such as a surgical tool and human organ. The virtual object is then mathematically formulated by adopting the shape retaining chain linked(S-Chain) model. After evaluating reflection force, computational time, and compatibility with real time control, the virtual environment of MIS is formulated by interactivity with the ER haptic device in real space. Tracking control performances for virtual force trajectory are presented in time domain, and theirtrackingerrorsareevaluated.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.12 s.117
• /
• pp.1286-1293
• /
• 2006

This paper presents force-feedback control performance of a haptic device in virtual environment of minimally invasive surgery(MIS). As a first step, based on an electrorheological (ER) fluid and spherical geometry, a new type of master device is developed and integrated with a virtual environment of MIS such as a surgical tool and human organ. The virtual object is then mathematically formulated by adopting the shape retaining chain linked(S-chain) model. After evaluating reflection force, computational time, and compatibility with real time control, the virtual environment of MIS is formulated by interactivity with the ER haptic device in real space. Tracking control performances for virtual force trajectory are presented in time domain.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.12
• /
• pp.1283-1291
• /
• 2003

Nonuniform transmission lines(NTLs) with the desired frequency response can be realized by synthesizing the potential from the coupled mode Zakharov-Shabat(ZS) equation in the one-dimensional inverse scattering problem. In this study, an efficient synthesis method using the ZS equations is presented for NTLs with arbitrarily specified reflection coefficients which take the restricted potential. This method lessens the line length which plague conventional design schemes using specific windows for reflection coefficients. Furthermore solving the ZS inverse transform problem is simplified by adopting the successive approach instead of the conventional iterative method. The proposed method is compared with the conventional method using specific windows by applying to design of dispersive NTL filters, and verified by two-port analysis through the chain matrix.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.229-236
• /
• 2002

In this paper, a new novel technique of seismic survey is introduced to estimate the continuity of inclined pits filled with water, It was assumed that the pits would be connected to an abandoned railway tunnel that might be constructed in the past. Thus, detection of pit end was needed for the design of a new highway tunnel(Yukshimreong tunnel) that was likely to be met with a pit. In the beginning of exploration, no reliable, cost effective method was available. Hence, focus of interest moved toward the high impedance contrast(reflection coefficient k∼0.8) between water and rock. In this special model of sequence rock-water-rock, total reflection occurs and the seismic energy, when it is generated in the pit water, is nearly confined to the pit so that seismic waves can propagate much further within the pit. As a matter of convenience, this is called“tunnel channel wave”. With these considerations in mind, seismic detonator(2g) was used as a source at the entrance of pit, whereas hydrophone chain(hydrophone interval=1m) was placed on the bottom of pit. With this appropriate source-receiver arrangement, desirable down-going and up-going waves could be observed that will help conform the continuity of pits. After about one year, it was ascertained that the inclined pit of interest was just nearby crossed with the newly excavated tunnel, as it was predicted.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.1
• /
• pp.57-66
• /
• 2001

By successful establishment of SCM(Supply Chain Management) System they should make the supply chains speedy and combine production information system with the outcome system and thus they reinforce the competition of the production system of local enterprises in accordance with the rapid decision making This study is to develop the most appropriate production system models through the reflection of JIT system in the SCM which is the necessity of the times and its importance. To achieve this goal the researcher diversifies the prerequisites for the success of the business which will be the strategical factors of the production systems. The objects of this study is to develop the most appropriate production system models and to provide the enterprises with the models which are based on the SCM.

• Proceedings of the Safety Management and Science Conference
• /
• 2000.11a
• /
• pp.143-150
• /
• 2000

By successful establishment of SCM(Supply Chain Management) System they should make the supply chains speedy and combine production information system with the outcome system and thus they reinforce the competition of the production system of local enterprises in accordance with the rapid decision making This study is to develop the most appropriate production system models through the reflection of JIT system in the SCM which is the necessity of the times and its importance. To achieve this goal the researcher diversifies the prerequisites for the success of the business which will be the strategical factors of the production systems. The objects of this study is to develop the most appropriate production system models and to provide the enterprises with the models which are based on the SCM.

• The Journal of Information Systems
• /
• v.23 no.1
• /
• pp.93-109
• /
• 2014

This study aims to develop a rich understanding of user goals in user-empowering information technologies which have been dominating part in the information systems environment. A particular focus is on users' goals in a social network site (SNS) which is a typical example of user-empowering technologies. Users conduct various activities in order to achieve diverse goals in SNS. Thus, investigating what goals users pursue in SNS will give insights into understanding the users. We employed the laddering interview technique and means-end chain approach. Interviews of 50 Facebook users were analyzed to produce a hierarchical goal map showing users' goal structure. The map contains 18 goals, including self-reflection, psychological stability, belongingness, improving productivity, and amusement as ultimate goals in SNS. In the map, there are varied routes from activities to ultimate goals in SNS; that is, a complex assembly consisting of activities and goals. The findings call the information systems research community to have more interests in diverse goals and values users seek with technologies.