• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1453-1455
• /
• 1996

The odd-even effect of the alkyl chain length of rubbed polyimide Langmuir-Blodgett (LB) surfaces on the extrapolation length of 5CB has been successfully evaluated for the first time by measuring polar anchoring strength. The extrapolation length of 5CB for rubbed PI-LB surfaces with even-numbers is small compared with odd-numbers for alkyl chain lengths of greater than 7 carbons. The extrapolation length of 5CB on rubbed PI-LB surfaces with odd-numbers increases gradually as the temperature increases but tends to diverge near the clearing temperature (Tc=$35.3^{\circ}C$). The extrapolation length diverges because of rapidly decreasing surface order near $T_c$. We suggest that the polar anchoring strength on rubbed PI-LB surfaces with even-number is strong because of relatively high surface ordering caused by more crystalline surfaces. Finally, we conclude that the odd-even effects of the polar anchoring strength in NLCs are strongly related to the character of the polymer and observed clearly for long alkyl chain lengths.

• Applied Biological Chemistry
• /
• 제43권1호
• /
• pp.18-23
• /
• 2000

찹쌀 14 품종의 전분 미세구조는 효소처리에 의해서 debranching시킨 전분의 glucose chain length 분포 비교에 의해서 수행되었고, 찹쌀 품종별로 미세구조상에 차이가 있었다. 짧은 쇄장을 다량 함유하고 있는 찰품종은 병곡이었으며, 상대적으로 긴 쇄장을 다량 함유하고 있는 품종은 TP2579Al이었다. 15% $H_2SO_4$에 대한 가수분해도는 샤레벼-152-1-B가 가장 높았으며, 산동 47이 가장 낮았다. X선 회절도는 14 품종 찹쌀 모두 전형적인 A형이었다. Glucoamylase에 의한 가수분해도의 양상은 품종에 따라 차이가 있었으며, 거창 1 및 병곡은 $37^{\circ}C$에서 3시간 작용시킴에 의해 100% 가수분해 되었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.421-426
• /
• 2007

A parametric study to investigate the effects of composition variables on the glass transition and mechanical properties of CNT-based nanocomposites was performed using molecular dynamics simulations. In this study, matrix chain length and CNT length were chosen as the candidate characteristic parameters. In order to understand the effect of both parameters in detail, three sample sets having different chain lengths with the same CNT configuration and two sample sets having different CNT lengths with same chain length were prepared. Other parameters such as volume fraction and density were fixed to enable rigorous comparisons. Amorphous polyethylene is used as matrix polymer and (10,0) zigzag CNT is embedded into the matrix to reinforce polymer matrix. As a result, longer polymer chain length of matrix solely increased glass transition temperature but no reinforcing enhancement was observed. CNT length showed similar increase with little enhancement of elastic modulus. In addition to this, nanocomposites showed temperature-dependent elastic modulus jump passing thorough the glass transition region agrees well with experimental results.

• 미생물학회지
• /
• 제36권2호
• /
• pp.84-90
• /
• 2000

Psudomonas sp. RY-1이 생성하는 extracellular depolymerase system을 이용하여 단위체의 결가지에 서로 다른 탄소 길이와 불포와기를 함유하는 medium-chain-length polyhdroxyalkanoates (MCL-PHAs)의 생분해도를 시럼실 조건에서 조사하였다. 생분애도는 평파내지에서의 clear zone 형성, 효소 처리에 의한 고분자 현탁액의 탁도 감소 및 호흡량의 경시적 변화로 측정하였다. Pseudomonas sp. RY-1은 MCL-PHA depolymerase의 생성을 통하여 조사된 모든 종류의 MCl-PHAs를 분해할 수 있었으나, 이 효소의 생성은 쉽게 이용될수 있는 이차기질에 의해 저해받는 것으로 나타났다. MCl-PHAs의 분해율이 단위체의 탄소수가 홀수개로 구성된 고분자에 비하여 보다 높았다. 곁가지에 분포화기를 함유한 MCl-PHAs는 불포화기를 갖지 아니하는 고분자에 비하여 분해가 빠르게 이루어졌으며, 이들의 분해는 고분자의 결정화도와 밀접한 관련이 있는 것으로 나타났다.

• 한국해양공학회지
• /
• 제37권1호
• /
• pp.31-37
• /
• 2023

In this study, a fiber chain was developed to replace a steel chain using high-modulus polyethylene DM20. The pick count, wrapping count, and inner length were selected as the main design variables of the fiber chain and were analyzed to increase the breaking strength. Orthogonal array experiments were conducted, and the results were analyzed with respect to the breaking strength. The analysis revealed that the pick count and wrapping count had meaningful effects at significance levels within 5%. The main effect analysis revealed that a smaller pick count, larger wrapping count, and longer inner length caused the breaking strength to increase. With the wrapping count fixed at 1, a pick count less than -0.65, and an inner length greater than 0.38, the breaking strength was calculated to be greater than 300 kN. These results are expected be important factors in the derivation of an optimal combination of design variables to attain a fiber chain with a targeted strength.

• Bulletin of the Korean Chemical Society
• /
• 제12권6호
• /
• pp.666-673
• /
• 1991

The elongation of the chain length at 2'position of aminothiazolylacetamido group of cephalosporin antibiotics was achieved. The derivatives with elongated side chain at 2'position were successfully synthesis and their in vitro activities were evaluated. It is indicated that there is an optimum range of the chain length in order to exhibit higher biological activities. This result could open a possibility for the development of the cephalosporin antibiotics with higher activities by further variation of the substituents at other positions. The cephalosporin derivatives with a simple (relatively non-functionalized) side chain as well as with a linear extended side chain were also prepared. Low activities of these derivatives led to a conclusion that either simple (non-functionalized) change or linear elongation of the side chain does not enhance the antibacterial activities.

• International Journal of Quality Innovation
• /
• 제9권3호
• /
• pp.57-69
• /
• 2008

This paper posits that arm's length buyer-supplier relationship as the intermediate type between market exchange relations and strategic partnership might be advisable, and information technology may have a role as a mechanism actualizing the effects of such arm's length relationship by strategic supply-line diversification. Based on the theoretical analysis on interactive feedback relationships among IT level, buyer-supplier relationships, and supply chain structure, we suggest a set of advisable buyer-supplier relationship type for efficient supply chain management. Also, doing so would be helpful in suggesting a dynamic IT investment and adoption model appropriate for the establishment of productive buyer-supplier relationship, and further in providing theoretical foundations and practical guidelines on the role and function of B-to-B E-commerce for efficient SC integration.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.56-56
• /
• 2010

Using first-principles density-functional theory calculations, we find dramatically different electronic states in the C chains generated on the H-terminated C(111) surface, depending on their length and parity. The infinitely long chain has $\pi$ electrons completely delocalized over the chain, yielding an equal C-C bond length. As the chain length becomes finite, such delocalized $\pi$ electrons are transformed into localized ones. As a result, even-numbered chains exhibit a strong charge-lattice coupling, leading to a bond-alternated structure, while odd-numbered chains show a ferrimagnetic spin ordering with a solitonlike structure. These geometric and electronic features of infinitely and finitely long chains are analogous to those of the closed (benzene) and open (polyacetylene) chains of hydrocarbons, respectively.

• 대한수학회보
• /
• 제33권3호
• /
• pp.393-395
• /
• 1996

Let P be a finite poset and let $\mid$P$\mid$ be the number of vertices in pp. A Subposet of P is a subset of P with the induced order. A chain C in P is a subposet of P which is a linear order. The length of the chain C is $\mid$C$\mid$ - 1. A poset is bipartite if the length of each maximal chain is one.

• 멤브레인
• /
• 제28권1호
• /
• pp.67-74
• /
• 2018

고분자 분리막의 분자동역학 연구에서는 구성 원자 개수가 많고 투과 거동 계산시 긴 시간을 필요로 하기 때문에 적절한 고분자 주쇄의 길이를 선택하는 것이 매우 중요하다. 본 연구에서는 이러한 고분자 주쇄 길이와 투과 거동 간의 상관관계가 실제 분자동역학에서 어떻게 나타나는지 조사를 하고자 하였다. 널리 알려진 상용 고분자 Kapton(R) 폴리이미드 구조를 이용하여 분자동역학을 수행하였고 기체 투과 거동을 분석하였다. 고분자 주쇄의 움직임은 그 길이와 큰 연관성이 없었으며, 일반적인 인식과 달리 짧은 주쇄 길이를 갖고 있다고 해서 더 활발하게 움직이는 것은 아니라는 것을 확인할 수 있었다. 또한, 고분자 주쇄의 말단기는 상대적으로 움직이기 쉬울 것이라는 예상과 달리, 말단에 위치하지 않은 경우라도 말단기에 위치한 원자보다 더 높은 움직임을 보이는 경우도 많았다. 최종적으로 기체 분자의 투과 성능에서도 고분자 주쇄의 길이 및 말단기에 따른 영향은 관찰되지 않았다. 이는 기체 투과 전산모사에서 많이 언급되는 말단기 효과를 실제 전산모사에 적용할 경우, 각각의 모델 특성에 따라 제한적으로 적용을 하고 이에 대한 검증 과정을 반드시 수행하여야 한다는 것을 의미한다.