• Journal of the Korean Chemical Society
• /
• v.55 no.5
• /
• pp.776-780
• /
• 2011

A mild and efficient procedure for the synthesis of various 1,5-benzothiazepines were developed. This method provides an easy access for preparation of 1,5-benzothiazepine derivatives in the presence of 10 mol% catalyst of CAN under ultrasonic irradiation. This method provided clean conversion, mild reaction condition, no use of toxic solvent and shorter reaction time compared to other reported method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.7 no.1
• /
• pp.11-16
• /
• 1983

Variance of whiteness after graft copolymerization of acrylonitrile, methylmethacrylate and acrylamide onto bleached cellulose using Ce(IV) salt as initiators and the effect of homopolymer on the grafted fibers by photo-irradiation were studied. Also, the development of Yellowing were determined after carbon-arc radiation in a Fade-o-meter. The results were as follows: (1) Variation of whiteness of grafted cellulose fibers were influenced by graft-ratio, Inorganic-Organic Balance (IOB) of functional group in used monomers and adhering homopolymers on the grafed fibers. (2) Yellowing was not affected by the concentration of Ceric Ammonium Nitrate directly during reaction (eg. 0.008>0.006>0.014 M).

• Journal of Sericultural and Entomological Science
• /
• v.20 no.2
• /
• pp.40-44
• /
• 1978

Cerium (IV) ion-initiated graft copolymerizations of acrylonitrile to raw silk were investigated in an effort to carry out sericine-fixation. The change in ceric ammonium nitrate concentration exhibited a maximum in percentage of grafting at 0.003M. Also observed was that the change in nitric acid content in reaction media gave a maximum in percentage of grafting at 0.1M. Percentage of grafting was increased generally with increase in acrylonitrile concentration, reaction time and reaction temperature. Raw silk sericin grafted with acrylonitrile was not de gummed by boiling off test and optimum graft percentage was considered at 20%.

• Applied Chemistry for Engineering
• /
• v.5 no.3
• /
• pp.524-536
• /
• 1994

Chitosan is known to be a good biocompatible natural polymer. Polyethyleneglycol monomethacrylates(PEGM) were grafted onto chitosan and their reaction conditions and properties of the graft polymers obtained were estimated. Using ceric ammonium nitrate(CAN) as the initiator, the optimum condition for graft polymerization was determined amount of the initiator and monomer concentrations and reaction time. Grafting yields such as total conversion, the percentage of grafting and the efficiency of grafting were calculated and examined the optimum reaction condition for high grafting yields. The percentage of grafting and total conversion were maximum at condition that the concentration of initiator was $4{\sim}5{\times}10^{-3}M$, the concentration of monomer was 0.5~0.6M, the reaction time was 2~3 hours and the reaction temperature was about $40^{\circ}C$. Thermal characteristics, solubility for chitosan solvents and inherent viscosity of synthesized graft copolymers were investigated. In high initiator concentration, characteristics of chitosan were greatly diminshed. In case of inherent viscosities, chitosan-g-PE-90 was 2.81 dl/g, chitosan-g-PE-200, 3.01dl/g and chitosan-g-PE-350, 4.93dl/g. And a tendency of viscosity increase depending on the length of ethylene oxide residue was confirmed. Degree of swelling, tensile strength, elongation of membrane prepared from graft copolymers were determined. Properties of graft copolymers were affected by percentage of grafting and length of ethylene oxides residue in polyethylene glycol monomethacrylates. Tensile strength, elongation and degree of swelling of graft copolymers were remarkably improved than chitosan. As percentage of grafting increased, the amount of drug permeation was also increased.

• BMB Reports
• /
• v.38 no.6
• /
• pp.668-675
• /
• 2005

A full-length cDNA encoding taxadiene synthase (designated as TmTXS), which catalyzes the first committed step in the Taxol biosynthetic pathway, was isolated from young leaves of Taxus media by rapid amplification of cDNA ends (RACE). The full-length cDNA of TmTXS had a 2586 bp open reading frame (ORF) encoding a protein of 862 amino acid residues. The deduced protein had isoelectric point (pI) of 5.32 and a calculated molecular weight of about 98 kDa, similar to previously cloned diterpene cyclases from other Taxus species such as T. brevifolia and T. chinenisis. Sequence comparison analysis showed that TmTXS had high similarity with other members of terpene synthase family of plant origin. Tissue expression pattern analysis revealed that TmTXS expressed strongly in leaves, weak in stems and no expression could be detected in fruits. This is the first report on the mRNA expression profile of genes encoding key enzymes involved in Taxol biosynthetic pathway in different tissues of Taxus plants. Phylogenetic tree analysis showed that TmTXS had closest relationship with taxadiene synthase from T. baccata followed by those from T. chinenisis and T. brevifolia. Expression profiles revealed by RT-PCR under different chemical elicitor treatments such as methyl jasmonate (MJ), silver nitrate (SN) and ammonium ceric sulphate (ACS) were also compared for the first time, and the results revealed that expression of TmTXS was all induced by the tested three treatments and the induction effect by MJ was the strongest, implying that TmTXS was high elicitor responsive.

• Korean Journal of Medicinal Crop Science
• /
• v.21 no.1
• /
• pp.7-19
• /
• 2013

This study was carried out to select new pelleting binder and material for seeds from Fraxinus rhynchophylla Hance and Alnus sibirica Fisch. ex Turcz. The optimum treatments of the various concentrations and species of priming agents to improve seed germination of both woody medicinal plants were also estimated. Germinability was increased when the seeds of Fraxinus rhynchophylla Hance was soaked in -1.0 MPa of PEG6000 solution at $15^{\circ}C$ for 4 days significantly, the optimum treatment for improving germination of Alnus sibirica Fisch. ex Turcz was observed when the tested seeds was soaked in 100 mM of KCl at $15^{\circ}C$ for 4 days. The influence of physical and chemical properties of pelleting solid materials, the mixture of gypsum, diatomaceous earth, dalma ceramic and vermicuolite (6:1:1:1 ratio) were found as the best pelleting materials for Fraxinus rhynchophylla Hance and Alnus sibirica Fisch. ex Turcz. seeds. To satisfy the requirements of absorption and compatibility for multi-layer seed pelleting, SGPA (Starch-grafted cross-linked polyacrylates) hydrogel was prepared using starch, acrylonitrile, ceric ammonium nitrate, nitric acid, methyl alcohol and potassium hydroxide. The resulting SGPA hydrogel showed high water absorption but not plant compatibility. It suggested that seed pelleting using pelleting materials and SGPA hydrogel (multi-layer coating) after priming agent treatment is to increase germinability and seedling growth and it can reduced irrigation labours and can also save seed.