• Design & Manufacturing
• /
• 제14권3호
• /
• pp.50-56
• /
• 2020

Ceramic tile is widely used as a floor or interior decoration of buildings. The main processes are raw material blending, molding, drying, firing, etc., and since dimensional and quality stability are very important, they are generally molded by a dry press method. In ceramic tile molds, there is a liner that can be easily replaced in case of wear. The liner is constantly abrasion due to a continuous pressing process during tile forming, and it is required to be replaced every certain period. Even in the liner, use a wear-resistant fitting material only in areas where wear is concentrated. However, there was a risk that the fitting material was applied to large-sized tile molding due to problems such as damage to the molding machine and decrease in productivity when detached during the actual tile molding process due to weak fitting strength with the liner. Therefore, in this study, thermal-structural analysis for fitting tolerance analysis and structural analysis for fitting force analysis were performed for the shrink fit process of the fitting material.

• 한국재료학회지
• /
• 제29권11호
• /
• pp.690-696
• /
• 2019

Geopolymer is an alumina silicate-based ceramic material that has good heat-resistance and fire-resistance; it can be cured at room temperature, and thus its manufacturing process is simple. Geopolymer can be used as a reinforcement or floor finish for high-speed curing applications. In this manuscript, we investigate a high-speed curing geopolymer achieved by adding calcium to augment the curing rate. Metakaolin is used as the main raw material, and aqueous solutions of KOH and $K_2SiO_3$ are used as the activators. As a result of optimizing the high bending strength as a target factor for geopolymers with $SiO_2/Al_2O_3$ ratio of 4.1 ~ 4.8, the optimum ranges of the active agent are found to be $0.1{\leq}K_2O/SiO_2{\leq}0.4$ and $10{\leq}H_2O/K_2O{\leq}32.5$, and the optimum range of the curing accelerator is found to be $$0.82{\leq_-}Ca(OH)_2/Al_2O_3{\leq_-}2.87$$. The maximum flexural strength is found to be 1.35 MPa at $Ca(OH)_2/Al_2O_3=2.82$, $K_2O/SiO_2=0.3$, and $H_2O/K_2O=11.3$. The physical and thermal properties are analyzed to validate the applicability of these materials as industrial insulating parts or repairing finishing materials in construction.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2007년도 춘계학술대회 논문집
• /
• pp.81-84
• /
• 2007

The purpose of this study was to grasp actual condition of remodeling elements by specialists' in-depth interviews. The interview has been conducted to interior designer who have a wide experience of apartment remodeling. In-depth interview is a kind of qualitative method in which attention to reply of responses with open-access between interviewer and respondents. According to the results, remodeling elements were generally the renovation of balcony into the livingroom or children room, removal a doorsill, installation of storage furniture, change of lighting fixtures in the all rooms and change equipments of bathroom. Finishing materials were usual used normal wallpaper and normal or low emitting adhesive on ceiling and wall, tempered-flooring on floor, and ceramic tiles on bottom and wall of bath and entrance.

• 한국유체기계학회 논문집
• /
• 제13권4호
• /
• pp.11-17
• /
• 2010

The developed control valves, installed on the hot water distribution manifolds for the floor heating system, consist of the balancing valves and the shut-off valves. The balancing valve was designed to improve the flow control performance and to reduce the noise emitted from the valve by modification of the general V port. The port of the shut-off valve was designed with two ceramic plates, working by rotating upper plate, to improve the duration and to reduce the noise. For the evaluation of the new valves, the flow rate was measured and noise level test was carried out. The test results showed that the error of the flow rate accuracy test for the flow balance of each manifold circuit was less than ${\pm}3%$ and the noise level was less than 35 dB(A).

• 한국세라믹학회지
• /
• 제42권3호
• /
• pp.193-197
• /
• 2005

폐유리와 점토를 이용하여 일축 가압 성형법으로 타익을 제조하였다. 유리함량, 소성온도 및 소성시간에 따른 타일의 흡수율, 밀도, 겉보기 기공률, 압축강도, 마모감량 등을 고찰하였다. 소성온도 및 유리함량이 증가함에 따라 타일의 특성은 향상되었다. 폐유리를 $70wt.\%$ 사용하고 $1,050^{circ}C$에서 소성한 타일이 가장 우수한 특성을 나타내었으며, 이 때의 흡수율, 밀도, 겉보기 기공률, 압축강도, 마모감량은 각각 $0.9\%,\;2.3g/cm^3,\;2.1\%$, 210 MPa, 0.022g이었다. 이는 유리상의 혈성에 의잔 결과로서 타일의 기공 감소 및 치밀화에 기여하기 때문이다. 제조된 타일의 특성은 상용화되고 있는 일반 자기질 타일과 비교하여 우수한 특성을 나타내고 있으며, 바닥 및 내$\cdot$외벽용 무유타일로 적용 가능할 것이다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.829-832
• /
• 2008

1980년대 초반부터 대량 주택 공급과 고층 건축물의 급증으로 주차공간 부족현상이 사회적 문제점으로 지적되어져 왔다. 단적인 예로 서울시의 년간 주차장 개소 통계 연보를 살펴보면 2003년에 206,281 개소인 것이 2006년 237,770 개소로 약 15%의 증가율이 나타났다. 이와같이 매년 많은 주차시설이 확충되고 있는 것에 반하여 주차장 바닥에 사용되어지는 마감 재료의 대부분이 유기계 재료가 시공되어 지고 있다. 그러나 최근 "웰빙적 문화현상"에 따라 유기계 재료의 문제점(환경호르몬 배출, 휘발성유기화합물의 화재 위험 등)이 부각되고 있는 실정이다. 이에 본 연구에서는 작업자 뿐만아니라 사용자의 안전을 고려하여 인체 무해한 친환경 고유동 세라믹 수지 모르타르를 이용한 주차장 바닥 표면 마감재의 재료적 특성 분석 및 물성평가를 통하여 기존 유기계 바닥재의 문제점을 보완하고 새로운 개념의 주차장 바닥 마감재에 대한 현장 적용성을 확인하였다.

• The Journal of Advanced Prosthodontics
• /
• 제3권2호
• /
• pp.96-100
• /
• 2011

An 18-year-old male presented severe hypodontia due to hypohidrotic ectodermal dysplasia was treated with Le Fort I maxillary osteotomy with simultaneous sinus floor augmentation using the mixture of cortical autogenous bone graft harvested from iliac crest and organic Bio-Oss to position the maxilla in a right occlusal plane with respect to the mandible, and to construct adequate bone volume at posterior maxilla allowing proper implant placement. Due to the poor bone quality at other sites, ridge augmentation with onlay graft was done to construct adequate bone volume allowing proper implant placement, using tissue harvested from the iliac bone. Seven implants were placed in the maxilla and 7 implants were inserted in the mandible and screw-retained metal ceramic FPDs were fabricated. The two year follow up data showed that dental implants should be considered as a good treatment modality for patients with ectodermal dysplasia.

• 한국물환경학회지
• /
• 제22권3호
• /
• pp.534-539
• /
• 2006

The supply of oxygen for aeration is the largest energy consumer at activated sludge wastewater treatment plants. Replacement of less efficient aeration systems with fine pore aeration devices can save up to 50 percent of aeration energy costs. The purpose of this study was the diagnosis and evaluation of a domestic wastewater aeration system by the off-gas method which had been studied by US EPA and ASCE. For this study, an off-gas analyzer and its hood were made to collect off-gas. Also, a vacuum pump was connected to the analyzer to make suction of off-gas. Experiments were conducted at a domestic activated sludge wastewater treatment plant which had a single spiral roll aeration system installed with P.E tube diffuser. Data on OTE(f), SOTE(pw), OUR, and air flow rate were obtained from these experiments. In case of replacing an aeration system, it is recommended that it should be replaced with perforated membrane disc or ceramic disc fine bubble diffusers installed in a full floor coverage or grid pattern.

• 융합신호처리학회논문지
• /
• 제25권1호
• /
• pp.39-45
• /
• 2024

최근 국내뿐만 아니라 전 세계적으로 항공기 산업의 패러다임이 4차 산업혁명시대를 기점으로 하여 크게 변화하고 있으며 ICT 및 AI 신기술이 융합되고 군수 중심으로 형성되어 있던 드론 시장이 민수시장까지로 서비스가 전반적으로 확대되고 있다. 또한 드론은 배터리를 장착하여 작동하며 배터리를 사용하는 제품군은 제품의 경량화가 중요한 요소 중에 하나이다. 가벼운 만큼 배터리의 소모가 작으며, 효율을 극대화할 수 있기 때문이다. 따라서 최근에는 이러한 경량화하기 위해서 복합소재를 활용하고 있다. 경량화뿐만 아니라 고기능성(난연, 염수 등)을 위해서 프로펠러뿐만 아니라 기체, 내장재, 바닥판, 구동장치, 배터리 하우징 등 대부분의 영역에 적용되고 있으며 핵심기술로 부각되고 있다. 따라서 본 논문에서는 최근 경량화의 목적으로 부각되고 있는 세라믹섬유 복합소재를 활용하여 드론의 가장 핵심 요소인 프로펠러를 대상으로 소음 및 강도를 개선하고자 하며, 이와 더불어 저소음의 기능적인 디자인을 채택하여 제작함으로써 프로펠러의 성능을 검증하고자 한다.

• 한국물환경학회지
• /
• 제22권6호
• /
• pp.1119-1122
• /
• 2006

Aeration by using diffusers usually requires approximately 50~90% of the total electricity needed to operate WWTP (WasteWater Treatment Plant)s. Accurate evaluation of the oxygen transfer efficiency for an aeration system, and recommendation of a better alternative may help saving WWTP operational costs. Appropriate techniques and methods to achieve this purpose have not been introduced in Korea. In this study, in-process analysis was performed for a coarse bubble aeration system by the off-gas method to evaluate its applicability in Korea. To accomplish this analysis, an off-gas test, unsteady-state clean water test and steady-state off-gas column test was conducted and comparisons to other aeration systems were made. The ${\alpha}$ and the F estimated from the results of the unsteady-state clean water test and the steady-state off-gas column test were 0.61 and 0.90 respectively in a coarse bubble aeration system. The comparison of P.E tube diffusers laid out single spiral roll and ceramic dome diffusers laid out full floor coverage showed that the oxygen transfer efficiency of the coarse bubble aeration system was less than or similar to other aeration systems. But, airflow rates per unit area were 4~5 times greater than other aeration systems. In regards to the oxygen transfer efficiency for airflow rates per unit area, a retrofit to higher efficiency diffusers was urgently needed. This study showed proved that off-gas methods can apply to evaluate diffuser performances to estimate operating factors and to compare other aeration systems in Korea.