• 산업기술연구
• /
• 제17권
• /
• pp.111-118
• /
• 1997

This thesis is an experimental research of investigating behavior of single pile, subjected to the vertical compression loads, using the centrifuge facility located in the geotechnical engineering laboratory in Kangwon National University. Centrifugal model experiments of model pile were carried out changing diameter of model pile, relative density of sandy ground and the gravitational level applied in the centrifuge. Thus, their effects on the load-settlement behavior and the ultimate bearing capacity of pile were investigated. Experimental results obtained from centrifuge model tests were compared with the theoretical or semi-empirical equations to analyze values of ultimate bearing capacity of model pile. When we compare the ultimate bearing capacity of experimental results with the ultimate bearing capacity of theorical results, the experimental results appear more higher in the De Beer method and Meyerhof. Expecially, Terzaghi method is very same as the experimental results normally.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1060-1067
• /
• 2006

Sandy soils are generally used as a capping material to reduce the pollutants transport from the contaminated dredged sediment. However, dredged material capping is not widely used because regulatory agencies are concerned about the potential for contaminants migration through the cap. Movement of contaminated pore water from sediment into cap is mainly related to sediment consolidation during and after cap placement. To evaluate the significance of consolidation induced transport of contaminants from sediment into cap, research centrifuge tests were conducted. Centrifuge test results illustrate that advection and dispersion are the dominant contaminants transport processes and that capping reduces the potential of contaminant migration from the dredged sediment effectively.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.395-406
• /
• 2008

An excavation with the depth of 32.7m will be constructed as a ventilation shaft in Shanghai metro Line 9. The excavation induced effect on a nearby undercrossing road in operation must be properly evaluated. A centrifuge model test was conducted to study the impact of deep excavation on this existing undercrossing. Detail simulation works are described in this paper. The excavation steps could be simulated in the no-stop state of centrifuge machine. And induced settlements of the undercrossing road in both parallel and vertical directions were analyzed. Protective partition cement soil piles were also simulated in the tests. Simulation test shows deep excavation has a great influence on undercrossing road and the partition pile can obviously deduce the influence.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1988년도 학술세미나 강연집
• /
• pp.3-67
• /
• 1988

Model studies on the response of homgeneous earth embankment dams subjected to strike-slip fault movement have been penomed via centrifuge and finite element analysis. The centrifuge model tests have shown that crack development in earth embankment experiences two major patters: shear failure deep inside the embankment and tension failure near the surface. The shear rupture zone develops from the base level and propagates upward continuously in the transverse direction but allows no open leakage chnnel. The open tensile cracks develop near the surface of the embankment, but they disappear deep in the embankment. The functional relationship has been developed based on the results of the centrifuge model tests incorporating tile variables of amount of fault movement, embankment geometry, and crack propagation extent in earth des. This set of information can be used as a guide line to evaluate a "transient" safety of the duaged embankment subjected to strike-slip fault movement. The finite element analysis has supplemented the additional expluations on crack development behavior identified from the results of the centrifuge model tests. The bounding surface time-independent plasticity soil model was employed in the numerical analysis. Due to the assumption of continuum in the current version of the 3-D FEM code, the prediction of the soil structure response beyond the failure condition was not quantitatively accurate. However, the fundamental mechanism of crack development was qualitatively evaluated based on the stress analysis for the deformed soil elements of the damaged earth embankment. The tensile failure zone is identified when the minor principal stress of the deformed soil elements less than zero. The shear failure zone is identified when the stress state of the deformed soil elements is at the point where the critical state line intersects the bounding surface.g surface.

• 한국지반공학회논문집
• /
• 제36권2호
• /
• pp.29-42
• /
• 2020

본 연구에서는 모래지반에 설치된 해상풍력 지지용 직경 7m 모노파일의 p-y 곡선에 대한 수평하중-모멘트 조합의 영향을 분석하기 위하여 원심모형실험을 수행하였다. 이를 위하여 원심모형실험시스템을 구축하였고, 다수의 게이지를 부착한 계측용 모노파일 모형을 사용하여 68.83g에서 원심모형실험을 수행하였다. 지표면으로부터 직경의 1배와 직경의 5배 높이에서 하중재하를 하는 2개의 수평하중-모멘트 조합으로 재하시험이 수행되었다. 모형지반은 중간밀도의 모래로 조성되었다. 원심모형실험결과로부터 실험 p-y 곡선을 산정하였고 기존 문헌의 p-y 곡선과 비교하였다. 결과적으로 p-y 곡선에 대한 모멘트 조합의 영향이 미미함을 확인하였다. 또한, 근입깊이가 모노파일의 p-y 곡선에 영향을 미치는 것을 확인하였다

• 한국지반공학회논문집
• /
• 제34권5호
• /
• pp.53-63
• /
• 2018

무리말뚝의 내진설계를 수행할 때 지반-말뚝 동적상호작용을 고려하는 것이 중요하다. 특히, 동적하중을 받는 무리말뚝의 횡방향 저항력은 무리말뚝 효과에 의하여 단일말뚝과 비교하여 감소한다. 그러나, 지금까지 지진하중을 받는 무리말뚝의 동적 무리말뚝 효과를 제안한 연구는 매우 부족한 실정이다. 그러므로, 본 연구에서는 건조 모래지반에 설치된 $3{\times}3$ 무리말뚝에 대한 동적 원심모형실험을 수행하여 무리말뚝 효과를 산정하였다. 이 무리말뚝 효과는 동적 p-y 곡선에서 극한 횡방향 지반반력과 지반반력계수에 대한 보정계수(multiplier)를 적용하여 고려하였다. 그리고, 본 연구에서 얻어진 동적 p-y 곡선을 Beam on Nonlinear Winkler Foundation 모델을 이용한 비선형 동해석에 적용하여 그 적용성을 검증하였다. 그 결과, 본 연구에서 제안한 무리말뚝의 보정계수가 원심모형실험 결과를 잘 모사할 수 있는 것으로 나타났다.

• 대한토목학회논문집
• /
• 제28권4C호
• /
• pp.221-230
• /
• 2008

캐나다 서부 밴쿠버 지역의 Fraser강 바닥의 사질토 지반에 위치한 George Massey 침매터널이 지진 시에 어떻게 거동하는 지를 연구하였다. 지진으로 발생하는 간극수압을 계산할 수 있는 유효응력모델인 UBCSAND모델을 이용하여 지진하중으로 인한 지반의 변위와 침매터널의 거동을 예측하였으며, 이를 미국 Rensselaer Polytechnic Institute(RPI)에서 실시한 원심모형실험 결과와 비교하였다. 본 연구에서 해석한 George Massey 침매터널의 원심모형실험은 2개의 모델로 구성되었으며, Model 1은 기본 모델로서 원상태 지반을, Model 2는 다짐공법으로 지반개량을 실시한 지반을 모델링하였다. 원심모형실험 Model 1에서 설계지진으로 인한 주변 지반의 액상화로 모형터널의 변위가 크게 발생하였다. Model 2에서 다짐공법으로 터널 주변 지반을 개량하였을 때 모형터널의 수직 및 수평 변위는 Model 1보다 50% 정도 감소하였다. UBCSAND모델은 원심모형실험에서 계측된 과잉간극수압, 가속도, 변위를 비교적 잘 예측할 수 있었다. 이와 같이 검증된 수치해석방법은 유사한 지반에 설치된 침매터널의 지진 시 변위와 거동을 예측할 수 있으며, 액상화에 대한 지반개량공법과 개량범위를 체적화할 수 있을 것으로 판단된다.

• Coupled systems mechanics
• /
• 제4권1호
• /
• pp.37-65
• /
• 2015

Modeling and simulation of mechanical response of infrastructure object, solids and structures, relies on the use of computational models to foretell the state of a physical system under conditions for which such computational model has not been validated. Verification and Validation (V&V) procedures are the primary means of assessing accuracy, building confidence and credibility in modeling and computational simulations of behavior of those infrastructure objects. Validation is the process of determining a degree to which a model is an accurate representation of the real world from the perspective of the intended uses of the model. It is mainly a physics issue and provides evidence that the correct model is solved (Oberkampf et al. 2002). Our primary interest is in modeling and simulating behavior of porous particulate media that is fully saturated with pore fluid, including cyclic mobility and liquefaction. Fully saturated soils undergoing dynamic shaking fall in this category. Verification modeling and simulation of fully saturated porous soils is addressed in more detail by (Tasiopoulou et al. 2014), and in this paper we address validation. A set of centrifuge experiments is used for this purpose. Discussion is provided assessing the effects of scaling laws on centrifuge experiments and their influence on the validation. Available validation test are reviewed in view of first and second order phenomena and their importance to validation. For example, dynamics behavior of the system, following the dynamic time, and dissipation of the pore fluid pressures, following diffusion time, are not happening in the same time scale and those discrepancies are discussed. Laboratory tests, performed on soil that is used in centrifuge experiments, were used to calibrate material models that are then used in a validation process. Number of physical and numerical examples are used for validation and to illustrate presented discussion. In particular, it is shown that for the most part, numerical prediction of behavior, using laboratory test data to calibrate soil material model, prior to centrifuge experiments, can be validated using scaled tests. There are, of course, discrepancies, sources of which are analyzed and discussed.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제8권1호
• /
• pp.35-41
• /
• 2003

캡이 설치된 준설퇴적토층에서 확산에 의한 오염물질이동을 측정할 수 있는 실내 실험방법들이 있지만, 확산에 의한 오염물질이동은 캡핑효과에 큰 영향을 미치지 않는다. 반면, 캡이 설치되는 동안이나 후에 퇴적층의 압밀에 의해 오염물질이 훨씬 더 많이 이동한다. 이것을 증명하기 위해, 원심모형시험기를 이용한 모형실험이 실시되었다. 본 연구에서 22.5시간 100 g에 대해 축소모형실험을 실시하였는데, 이것은 실제로 25년의 오염원이동시간과 축소모형의 100배 규모에 해당되는 모델링이라고 할 수 있다. 원심모형 실험결과 압밀에 의한 이류와 분산이 오염원 이동의 주 원인임을 알 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.26-43
• /
• 2010

To determine the effect of draining for the drainage layer in CFGD(Concrete Faced Gravel Dam) body, centrifuge model tests were performed. Also, soil compaction works are essential to construction of dams in order to avoid unexpected settlement of superstructures. Taking advantage of oscillating accelerometer, this research was made to complement existing methods for assessment of soil stiffness. In order to examine the validity of compaction-degree suggested in the study, tests on vibration characteristics using accelerometers was also performed.