• 한국지반공학회논문집
• /
• 제22권11호
• /
• pp.151-158
• /
• 2006

균일한 모래지반을 이용한 원심모형실험에서는 지표면근처에서 액상화가 발생한 후에 점차적으로 깊은 곳으로 전파되는 경향을 보였다. 이와 같은 현상은 실내실험에서 상재하중효과를 고려했을 때 관찰되는 액상화현상과 상반되는 것처럼 보인다. 그러나, 응력증가에 따른 모형지반의 상대밀도증가가 구속압증가에 따른 액상화저항감소를 상쇄시킨다. 이와 같은 응력증가에 따른 상대밀도증가는 실제 원심모형실험에서 발생하고 있으나, 모형지반성형법에서는 고려되고 있지 않다. 따라서, 본 논문에서는 원심모형실험에서 발생할 수 있는 상대밀도증가를 고려한 새로운 원심모형지반성형법을 제안하였다. 새로운 모형지반성형법은 액상화에 관한 $K_0$ 효과를 연구하는데 사용될 수 있으며, 본 연구에서는 수치해석방법을 이용하여 그 실용성을 증명하였다.

• 산업기술연구
• /
• 제32권A호
• /
• pp.87-94
• /
• 2012

For soils with high void ratios, the inverse method of utilizing results obtained from centrifuge model test was used to find the constitutive relation of effective stress - void ratio - permeability whereas conventional oedometer test and constant rate of strain consolidation(CRS) test about settlement of interface and pore pressure and distribution with time were compared with numerically estimated values to confirm such a constitutive relation as obtained from the inverse method. As results of numerical method, the volumetric ratio and reclamation velocity were obtained for the reclamation condition.

• 대한토목학회논문집
• /
• 제26권5C호
• /
• pp.351-358
• /
• 2006

본 연구의 목적은 원심모형실험으로 담수에 따른 CFRD 차수벽의 거동을 모사하는 방법 및 절차를 제시하고, 실험결과로 부터 콘크리트차수벽의 휨강성이 차수벽의 변위에 미치는 영향을 살펴보고, 원심모형실험으로 검증된 수치해석을 통하여 차수벽지지죤 강성이 차수벽콘크리트의 변위와 모멘트에 미치는 영향을 평가하는 것이다. 이를 위하여 실제 운영 중인 D댐에 대해 차수벽의 강성을 2가지로 변화시킨 원심모형실험을 수행하였고, 모형체의 축조재료에 대한 삼축압축실험을 수행하고 그 결과를 입력치로 한 수치해석을 통해 원심모형실험을 모사하였다. 모사된 수치해석 결과를 실험결과와 비교하여 수치모형의 적정성을 확인하고 확인된 수치모형에 대해 지지죤 강성을 변화시킨 수치해석을 수행하여 지지죤 강성변화에 따른 콘크리트 차수벽의 연직변위 및 모멘트 발생 양상을 분석하였다. 차수벽 두께를 2가지로 달리한 원심모형실험 결과, CFRD 차수벽 변위는 차수 목적의 콘크리트 두께 범위 내에서는 두께의 영향이 거의 없는 것으로 나타났다. 원심모형실험과 수치해석 결과로부터 담수 시 CFRD 차수벽의 변위 및 최대변위 발생위치는 콘크리트차수벽 휨강성에는 영향이 거의 없고, 차수벽지지죤의 강성이 큰 영향을 주는 것으로 나타났다.

• 산업기술연구
• /
• 제24권B호
• /
• pp.107-116
• /
• 2004

This thesis is results of experimental works on the behavior of the cut-and-cover tunnel. Centrifuge model tests were performed to simulate the behavior of the cut-and-cover tunnels having cross sections of national road and subway tunnels. Model experiments were carried out with changing the cut slope and the slope of filling ground surface. Displacements of tunnel lining resulted from artificially accelerated gravitational force up to 40g of covered material used in model tests, were measured during centrifuge model tests. In model tests, Jumunjin Standard Sand with the relative density of 80 % and the zinc plates were used for the covered material and the flexible tunnel lining, respectively. Basic soil property tests were performed to obtain it's the property of Jumumjin Standard Sand. Shear strength parameters of Jumunjin Standard Sand were obtained by performing the triaxial compression tests. Direct shear tests were also carried out to find the mechanical properties of the interface between the lining and the covered material. Compared results model tests estimation with respect to displacements of the lining.

• 산업기술연구
• /
• 제24권A호
• /
• pp.239-250
• /
• 2004

Numerical analysis were performed to investigate the stability and internal movement of tunnel located beneath the base of abutment of bridge according to the method of supporting tunnel. Two supporting methods of the multi-staged grouting method with steel pipes and the large diameter of pipe supporting method were used in the centrifuge model tests. The slip form of model lining, specially built to simulate the process of tunnel excavating under the condition of accelerated g-level, was used in the centrifuge model tests. Four centrifuge model tests were performed, changing the supporting methods of the multi-staged grouting method with steel pipes and the large diameter of pipe supporting method and the location of model abutment base of bridge. For internal displacement of tunnel, movements of the crown. The left and the right sides of spring line were measured during the proceeds of excavating tunnel in centrifuge model tests. Test results were compared with numerically estimated values of internal displacement of tunnel by using the commercially available FEM software of PENTAGON-3D. It was found that they were in good agreements and the large diameter of pipe supporting method was more stable than the multi-staged grouting method with steel pipes with respect to the internal movement of tunnel.

• 산업기술연구
• /
• 제23권A호
• /
• pp.119-130
• /
• 2003

This thesis is results of experimental works on the behavior of the cut-and-cover tunnel. Centrifuge model tests were performed to simulate the behavior of the cut-and-cover tunnels having cross sections of national road and subway tunnels. Model experiments were carried out with changing the cut slope and the slope of filling ground surface. Displacements of tunnel lining resulted from artificially accelerated gravitational force up to 40g of covered material used in model tests, were measured during centrifuge model tests. In model tests, Jumunjin Standard Sand with the relative density of 80 % and the zinc plates were used for the covered material and the flexible tunnel lining, respectively. Basic soil property tests were performed to obtain it's the property of Jumumjin Standard Sand Shear strength parameters of Jumunjin Standard Sand were obtained by performing the triaxial compression tests. Direct shear tests were also carried out to find the mechanical properties of the interface between the lining and the covered material. Compared results model tests estimation with respect to displacements of the lining.

• 산업기술연구
• /
• 제30권B호
• /
• pp.25-32
• /
• 2010

In this paper stability about lateral soil movement of bridge abutment constructed on the soft ground, reinforced with the sand compaction pile (SCP) and the preconsolidaton methods, was evaluated by using the centrifuge testing facility which stress conditions in field could be reconstructed in the laboratory. The layouts of model such as ground condition, sand compaction piles and abutment was determined on the basis of similitude law with the reduced scale of 1/200. Construction sequences of installing SCP, preparing reclaimed ground, preconsolidating ground and building the piled bridge abutment were reconstructed during centrifuge modelling and measurements of movement were followed in each sequence. From analyzing the results of measuring movements of the model abutment and the ground, measured lateral movement of model abutment was found to be within the allowable value so that stability of abutment against lateral sliding was secured.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.521-528
• /
• 2002

This paper presents the results of centrifuge model tests on the reinforced slope by pressure grouting. Tests were performed to investigate the reinforcing effect of grouting. In the tests, slopes of scale factor 1/10 were used changing the space and number of reinforcing bar. Test results are as tile follows; 1. The reinforcing effect increase rapidly with reinforcement area ratio at low value of reinforcement area ratio. 2. At high reinforcement area ratio the increase ratio of reinforcing effect decrease. 3. At same reinforcement area ratio, the reinforcing effect of double reinforcing bar was larger than the single reinforcing bar due to arching effect.

• Geomechanics and Engineering
• /
• 제33권4호
• /
• pp.415-425
• /
• 2023

Pile-supported wharves, port structures that support the upper deck, are installed on sloping ground. The sloping ground should be covered with a rubble mound or artificial blocks to protect the interior material from erosion caused by wave force. The behavior of the pile may vary during an earthquake if a rubble mound is installed on the slope. However, studies evaluating the effect of rubble mound on the pile during an earthquake are limited. Here, we performed dynamic centrifuge model tests to evaluate the dynamic behavior of piles installed in a slope reinforced with rubble mound. In the structure, some sections (single-pile, 2×2 group-pile) were selected for the experiment. The moment of the group-pile decreased by up to 26% upon installation of the rubble mound, whereas the moment of the single-pile increased by up to 41%, thus demonstrating conflicting results.

• 한국지반공학회논문집
• /
• 제21권1호
• /
• pp.59-67
• /
• 2005

본 논문은 모래다짐말뚝의 대체재로 제강슬래그를 다짐말뚝으로 사용하여 그에 따른 지반공학적 거동을 조사하기 위하여 원심모형 실험을 수행한 실험적 수치적 연구 결과이다. 제강슬래그의 상대밀도를 변화시킨 원심모형실험을 수행하여 그의 지지력 변화, 말뚝과 점토지반 사이의 응력분담비, 침하특성, 파괴메카니즘에 대하여 조사하였다. 원심모형실험결과, 슬래그다짐말뚝의 상대밀도가 증가할수록 지지력이 증가함을 확인하였으며 동일조건의 모래다짐말뚝 보다 약 $30\%$ 정도 항복하중강도가 크게 나타나 모래 대체 재료로서 효과가 있을 것으로 나타났다. 또한, 슬래그다짐말뚝의 상대밀도가 증가할수록 응력분담비는 증가하였으며 재하시험후 활동선 관찰결과 말뚝상부로 부터 $2D{\sim}2.5D$ 깊이에서 말뚝의 명료한 전단면이 발생하였다. 한편, 수정 Cam-clay 모델을 사용한 상용프로그램 CRISP을 이용하여 원심모형실험결과를 모사하였다. 하중-침하 곡선과 응력분담비의 특성에 대한 해석결과는 실험결과와 비교적 근접하였다.