• Journal of Chest Surgery
• /
• v.33 no.6
• /
• pp.445-468
• /
• 2000

Background: Retrograde cerebral perfusion(RCP) is currently used for brain protection during aorta surgery, however, for the safety of it, various data published so far are insufficient. We performed RCP using pig and investiaged various parameters of cerebral metabolism and brain injury after RCP under deep hypothermia. Material and Method: We used two experimental groups: in group I(7 pigs, 20 kg), we performed RCP for 120 minutes and in group II (5 pigs, 20 kg), we did it for 90 minutes. Nasopharyngeal temperature, jugular venous oxygen saturation, electroencephalogram were continuously monitored, and we checked the parameters of cerebral metabolism, histological changes and serum levels of neuron-specific enolose(NSE) and lactic dehydrogenase(LDH). Central venous pressure during RCP was mainained in the range of 25 to 30 mmHg. Result: Perfusion flow rates(ml/min) during RCP were 130$\pm$57.7(30 minutes), 108.6$\pm$55.2(60 minutes), 107.1$\pm$58.8(90 minutes), 98.6$\pm$58.7(120 minutes) in group I and 72$\pm$11.0(30 minutes), 72$\pm$11.0(60 minutes), 74$\pm$11.4(90 minutes) in group II. The ratios of drain flow to perfusion flow were 0.18(30 minutes), 0.19(60 minutes), 0.17(90 minutes), 0.16(120 minutes) in group I and 0.21, 0.20, 0.17 in group II. Oxygen consumptions(ml/min) during RCP were 1.80$\pm$1.37(30 minutes), 1.72$\pm$1.23(60 minutes), 1.38$\pm$0.82(90 minutes), 1.18$\pm$0.67(120 minutes) in group I and 1.56$\pm$0.28(30 minutes), 1.25$\pm$0.28(60 minutes), 1.13$\pm$0.26(90 minutes). We could observe an decreasing tendency of oxygen consumption after 90 minutes of RCP in group I. Cerebrovascular resistance(dynes.sec.cm-5) during RCP in group I incrased from 71370.9$\pm$369145.5 to 83920.9$\pm$49949.0 after the time frame of 90 minutes(p<0.05). Lactate(mg/min) appeared after 30 minutes of RCP and the levels were 0.15$\pm$0.07(30 minutes), 0.18$\pm$0.10(60 minutes), 0.19$\pm$0.19(90 minutes), 0.18$\pm$0.10(120 minutes) in group I and 0.13$\pm$0.09(30 minutes), 0.19$\pm$0.03(60 minutes), 0.29$\pm$0.11(90 minutes) in group II. Glucose utilization, exudation of carbon dioxide, differences of cerebral tissue acidosis between perfusion blood and drain blood were maintained constantly during RCP. Oxygen saturation levels(%) in drain blood during RCP were 22.9$\pm$4.4(30 minutes), 19.2$\pm$4.5(60 minutes), 17.7$\pm$2.8(90 minutes), 14.9$\pm$2.8(120 minutes) in group I and 21.3$\pm$8.6(30 minutes), 20.8$\pm$17.6(60 minutes), 21.1$\pm$12.1(90 minutes) in group II. There were no significant changes in cerebral metabolic parameters between two groups. Differences in serum levels of NSE and LDH between perfusion blood and drain blood during RCP showed no statistical significance. Serum levels of NSE and LDH after resuming of cardipulmonary bypass decreased to the level before RCP. Brain water contents were 0.73$\pm$0.03 in group I and 0.69$\pm$0.06 in group II and were higher than those of the controls(p<0.05). The light microscopic findings of cerebral neocortex, basal ganglia, hippocampus(CA1 region) and cerebellum showed no evidence of cerebral injury in two groups and there were no different electron microscopy in both groups(neocortex, basal ganglia and hippocampus), but they were thought to be reversible findings. Conclusion: Although we did not proceed this study after survival of pigs, we could perform the RCP successfully for 120 minutes with minimal cerebral metabolism and no evidence of irreversible brain damage. The results of NSE and LDH during and after RCP should be reevaluated with survival data.

• Progress in Medical Physics
• /
• v.10 no.3
• /
• pp.133-140
• /
• 1999

In this paper, as a preliminary study for developing a full 3D electron dose calculation algorithm, We developed 2.5D electron dose calculation algorithm by extending 2D pencil-beam model to consider three dimensional geometry such as air-gap and obliquity appropriately. The dose calculation algorithm was implemented using the IDL5.2(Research Systems Inc., USA), For calculation of the Hogstrom's pencil-beam algorithm, the measured data of the central-axis depth-dose for 12 MeV(Siemens M6740) and the linear stopping power and the linear scattering power of water and air from ICRU report 35 was used. To evaluate the accuracy of the implemented program, we compared the calculated dose distribution with the film measurements in the three situations; the normal incident beam, the 45$^{\circ}$ oblique incident beam, and the beam incident on the pit-shaped phantom. As results, about 120 seconds had been required on the PC (Pentium III 450MHz) to calculate dose distribution of a single beam. It needs some optimizing methods to speed up the dose calculation. For the accuracy of dose calculation, in the case of the normal incident beam of the regular and irregular shaped field, at the rapid dose gradient region of penumbra, the errors were within $\pm$3 mm and the dose profiles were agreed within 5%. However, the discrepancy between the calculation and the measurement were about 10% for the oblique incident beam and the beam incident on the pit-shaped phantom. In conclusions, we expended 2D pencil-beam algorithm to take into account the three dimensional geometry of the patient. And also, as well as the dose calculation of irregular field, the irregular shaped body contour and the air-gap could be considered appropriately in the implemented program. In the near future, the more accurate algorithm will be implemented considering inhomogeneity correction using CT, and at that time, the program can be used as a tool for educational and research purpose. This study was supported by a grant (＃HMP-98-G-1-016) of the HAN(Highly Advanced National) Project, Ministry of Health & Welfare, R.O.K.

• Progress in Medical Physics
• /
• v.26 no.1
• /
• pp.12-17
• /
• 2015

The purpose of the Monte Carlo simulation study was to provide the optimized nozzle design to satisfy the beam conditions for biomedical researches in the Korean heavy-ion accelerator, RAON. The nozzle design was required to produce $C^{12}$ beam satisfying the three conditions; the maximum field size, the dose uniformity and the beam contamination. We employed the GEANT4 toolkit in Monte Carlo simulation to optimize the nozzle design. The beams for biomedical researches were required that the maximum field size should be more than $15{\times}15cm^2$, the dose uniformity was to be less than 3% and the level of beam contamination due to the scattered radiation from collimation systems was less than 5% of total dose. For the field size, we optimized the tilting angle of the circularly rotating beam controlled by a pair of dipole magnets at the most upstream of the user beam line unit and the thickness of the scatter plate located downstream of the dipole magnets. The values of beam scanning angle and the thickness of the scatter plate could be successfully optimized to be $0.5^{\circ}$ and 0.05 cm via this Monte Carlo simulation analysis. For the dose uniformity and the beam contamination, we introduced the new beam configuration technique by the combination of scanning and static beams. With the combination of a central static beam and a circularly rotating beam with the tilting angle of $0.5^{\circ}$ to beam axis, the dose uniformity could be established to be 1.1% in $15{\times}15cm^2$ sized maximum field. For the beam contamination, it was determined by the ratio of the absorbed doses delivered by $C^{12}$ ion and other particles. The level of the beam contamination could be achieved to be less than 2.5% of total dose in the region from 5 cm to 17 cm water equivalent depth in the combined beam configuration. Based on the results, we could establish the optimized nozzle design satisfying the beam conditions which were required for biomedical researches.

• Progress in Medical Physics
• /
• v.24 no.1
• /
• pp.48-53
• /
• 2013

Monte Carlo method has been known as the most accurate method for calculating absorbed dose in the human body, and an anthropomorphic phantom has been mainly used as a method of simulating internal organs for using such a calculation method. However, various efforts are made to extract data on several internal organs in the human body directly from CT DICOM files in recent Monte Carlo calculation using Geant4 code and to use by converting them into the geometry necessary for simulation. Such a function makes it possible to calculate the internal absorbed dose accurately while duplicating the actual human anatomical structure. Thus, this study calculated the absorbed dose in the human body by using Geant4 associating with DICOM files, and aimed to confirm the usefulness by compare the result with the measured dose using a Gafchromic EBT2 film. This study compared the dose calculated using simulation and the measured dose in beam central axis using the EBT2 film. The results showed that the range of difference was an average of 3.75% except for a build-up region, in which the dose rapidly changed from skin surface to the depth of maximum dose. In addition, this study made it easy to confirm the target absorbed dose by internal organ and organ through the output of the calculated value of dose by CT slice and the dose value of each voxel in each slice. Thus, the method that outputs dose value by slice and voxel through the use of CT DICOM, which is actual image data of human body, instead of the anthropomorphic phantom enables accurate dose calculations of various regions. Therefore, it is considered that it will be useful for dose calculation of radiotherapy planning system in the future. Moreover, it is applicable for currently-used several energy ranges in current use, so it is considered that it will be effectively used in order to check the radiation absorbed dose in the human body.

• Journal of Technology Innovation
• /
• v.20 no.2
• /
• pp.75-107
• /
• 2012

Previous researches on technological innovation have several limitations such as lack of general mechanism for technological innovation(inputs, throughputs and outputs of technological innovation), large company oriented studies, and ignoring importance of technology management capabilities. So, this study suggested a new model using resource-based theory and system theory, and empirically applied that to SMEs. Structural equation model analysis by using 223 SMEs in Daegu region provided a support for most of hypotheses. Research results showed that all of factors on technological innovation were significantly and positively related with each other: inputs(R&D leadership, innovation strategy, R&D investment, R&D human resource management, external network), throughputs(portfolio management, project management, technology commercialization) and output(technological innovation). In case of technological innovation inputs, R&D leadership influenced on innovation strategy positively and significantly. And R&D leadership and innovation strategy had positive and significant effects on R&D investment, R&D human resource management and external network. R&D human resource management and external network exerted positive and significant influences on technological innovation throughputs such as portfolio management and project management. But R&D investment did not significant impacts on technological innovation throughputs. Among technological innovation throughputs, both portfolio management and project management had positive and significant effect on technology commercialization. In addition, technology commercialization acted positively and significantly technological innovation output. This study suggests necessary of efforts to implement innovation strategy and manage R&D human resource effectively based on CEO's innovativeness and entrepreneurship. Also, if SMEs want to develop technology and commercialize it, they have to cooperate with external technology resources and informations. Research results revealed that proper level of R&D investment, internal and external communication, information sharing, and learning and cooperative culture were very important for improvement of technological innovation performance in SMEs. Especially, this research suggested that if SMEs manage technological innovation process effectively based on resource-based and system approaches, then they can overcome their resource limitations and gain high technological innovation performance. Also, useful policy support for technological innovation of central or regional government by this research model is important factor for SMEs' technological innovation performance.

• 한국해양학회지
• /
• v.22 no.3
• /
• pp.130-142
• /
• 1987

Sedimentological characteristics of the surface sediments in the southern sea off Cheju Island are described from analyses of bottom sediments. The sediments are subdivided into seven textural classes, muddy sand, slightly gravelly muddy sand, sand, clayey sand, sandy clay, sandymud, silty sand. Sand-size sediments are distributed in the southeastern part and/or around the Island, whereas sandy and muddy sediments are mainly distributed in the central and southern parts of the study area. A small portion of mud patch is located in the southwestern part of the area. According to the textural parameters analysis, sediments in the study area are poorly sorted(av.2.52 ), positive skewed(av.1.61 ), leptokurtic(av.1.74 ), transported by saltation and/or suspension, and roundness of quartz is varied from angular to surrounded, which suggesting that the depositional environment is not simple. The calcium carbonate content is on the average 26.99%, and commonly abundant in sand-size sediments, whereas organic matter content in the bulk sediment is on the average 6.70% and usually dominant in fine-grained sediments.Light minerals consist of quartz(av56.01%),Na-Ca feldspar(av.6.15%),K-feldspar(av.9.22%) and rock fragments(av28.11%).The contect onquartz and K-feldspar increases continuously away from the Cheju Island. As a result of geochemical analysis,concentrations of the elements are as follow:Zn:19.42-43.52 ppm (av.30.67ppm),Mn:50-304 ppm(av139.39ppm),Cr:3.54-10.68ppm(av6.50ppm),Pb:5.52-41.68ppm(av.15.60ppm), Co:7.08-14.68ppm (av.10.78ppm),Ni:19.70-42.42ppm(av.29.57ppm),Cu:3.14-9.12ppm(av.5.14ppm),Fe:0.48-2.08% (av1.22%),Ca:0.32-13.16%(av6.60%),Al:0.06-0.08%(av.0.27%),Mg:0.12-0.76%(av.0.53%)na:0.11-0.51%(av.0.36%) Ag:0.48-4.08ppm(av.1.22ppm).Among these elements,the content of Zn,Cu,Cr,Mn,Fe,Al,Mg,Pb and Na increase toward the southwestern area,while the content of Ca and Ag SHOWS the reversed distribution trend.Such a distribution pattern seems to imply that spatial distrivution of heavy metals is closely related to the variation in grain size. X-ray diffractogram show that the minerals in clay from the southwestern mud patch are illite ,chlorite, kaolinte,feldspar and calcite.The bulk of illite in th mud zone is believed to be originated from Huanghe and Yangytze River.The mud patch in this region contains the diagnostic calcite peak,and the concentration of Ca,ni,Pb,Ag are similar to Huanghe type,which indicates that the greater part of these clay fractions may have been derived from the Huanghe River.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.3
• /
• pp.214-219
• /
• 2010

In order to evaluate the benefits of global warming on the double cropping with staple crops in North-Korea, four aspects such as the increasing rate of air temperature, the wintering temperatures for winter crops, the causing temperature of cool injury to rice and the securing of accumulated temperature for the double cropping in the different agricultural climate zones were analyzed by comparing the differences between the past 22 years from 1973 to 1994 and the recent 5 years from 2002 to 2006. The warming rate in recent daily mean air temperature of $8.96^{\circ}C$ in North Korea was higher by $0.64^{\circ}C$ than that in the past with large regional variations ranging from $1.06^{\circ}C$ in Samjiyeon of northern inland semi-alpine zone to $12.26^{\circ}C$ in Jangjeon of east central coastal zone. With the accumulated temperatures of more than $3,150^{\circ}C$ and $2,650^{\circ}C$, it was possible to apply the double cropping patterns with winter wheat and for cropping patterns with spring potato, respectively, to the whole region except for the northern inland semi-alpine zone. However, the wintering temperature higher than $-15^{\circ}C$ of average daily minimum air temperature of January, cropping patterns were impossible to northern inland semi-alpine zone and most regions of the northern mountainous zone. The days passed by below $17^{\circ}C$ in daily mean air temperature, causing the spikelet sterility at meiotic stage of rice in July, were a lot recorded from 21 to 29 days in northern inland semi-alpine zone and from 2 to 10 days in east-northern coastal zone, respectively. Therefore, a reasonable utilization of heat / temperature resources would relieve the limiting factors in double cropping for stable production of staple crops in North-Korea.

• Economic and Environmental Geology
• /
• v.44 no.4
• /
• pp.313-320
• /
• 2011

The Taebaegsan Mineralized District is the most prospective region for the useful mineral commodities such as a coal, non-metallic, metallic mineral in South Korea. From a general point of view, Cambro- Ordovician limestone formations, Myobong slate and Pungchon (Daegi) limestone, are the most fertilizable formations in the Taebaegsan Mineralized District. The geology around Weondong mine area consists mainly of Carboniferous-Triassic formations and Cambro-Ordovician formations intruded by rhyolite/quartz porphyry. The great overthrusted fault of N40~$50^{\circ}E$ direction, so called Weondong overthrust fault, is observed in the central part of the mine area and the NS fault system cuts the overthrusted fault. By postulating from the favorable geological and structural condition around Weondong area, the possibility of deep seated hidden ore bodies is expected. In 2010, on the basis of the results of LOTEM and CSAMT survey, the cross-hole survey was performed for the investigation of the hidden polymetallic ore body in the deep parts of the Weondong mine area and the grade of the newly-discovered orebody is as follows; (1) The cut-off grade for lead-zinc 3%; an weighted average grade 5.50% (2.7 m), (2) The cutoff grade for copper 0.1%; an weighted average grade 0.91% (14.65 m), (3) The cut-off grade for iron 30%; an weighted average grade 38.18% (3.3 m), (4) $WO_3$ for each cut-off grade(0.01%, 0.05%, 0.1%); an weighted average grade 0.29 wt. % (8.8 m), 1.15 wt. % (2.1 m), 1.97 wt. % (1.2 m), (5) $MoS_2$ for each cut-off grade(0.01%, 0.1%); an weighted average grade 0.15 wt. % (6.3S m), 0.28 wt. % (3.15 m), (6) $Ta_2O_5$ for each cut-off grade (0.01%, 0.1%); an weighted average grade 0.13% (19.S m), 1.11% (1.8 m), (7) $Nb_2O_5$ for each cut-offgrade (0.01%, 0.1%); an weighted average grade 0.06% 11.5 m), 0.15% (3.0 m).

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.2
• /
• pp.132-139
• /
• 2017

This study was conducted to find out the effects of over seeding using new grass varieties orchardgrass 'Kordione' and 'Onnuri', and tall fescue 'Greenmaster' on botanical composition and dry matter productivity from 2013 to 2016 in low productivity hilly pasture, middle area of Korea. There were used 3 grass seed mixture types made of different compositions and amounts {T1: control - no over seeding, T2: tall fescue (TF) 'Greenmaster' $18kg\;ha^{-1}$, orchardgrass (OG) 'Kordione' $9kg\;ha^{-1}$, Perennial ryegrass (PRG) 'Linn' $5kg\;ha^{-1}$, and Kentucky bluegrass (KBG) 'Kenblue' $2kg\;ha^{-1}$, T3: TF 'Greenmaster' $9kg\;ha^{-1}$, OG 'Kordione' $18kg\;ha^{-1}$, PRG 'Linn' $5kg\;ha^{-1}$, and KBG ' Kenblue' $2kg\;ha^{-1}$, T4: TF 'Greenmaster' $9kg\;ha^{-1}$, OG 'Onnuri' $18kg\;ha^{-1}$, PRG 'Linn' $5kg\;ha^{-1}$, and KBG 'Kenblue' $2kg\;ha^{-1}$}. In the botanical composition of grassland, T1 nearly remained constant in other seasons while ratio of weeds were increased in summer season. T2 was better than control (T1) in portion of grass ratio, which has increased by 80%. In the early time of establishment, the portions of OG were increased in T2, but TF rate was increased after 3 years later when grass was established. T3 and T4 showed a very similar patterns, grass ratio had increased by 80% and the portion of KBG had increased as time passed. T2 ($129,763kg\;ha^{-1}$) was showed the highest dry matter yield than other treatments (T1: $6,756kg\;ha^{-1}$, T3: 9641, and T4: 10,738) in 2016.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.3
• /
• pp.259-263
• /
• 1997

To investigate chemical changes of agricultural water in Nam river used for the basic information. Samples were collected from seven sites along the Nam river and were analyzed for inorganic content from April to September in $1994{\sim}1995$. Average value of analyzed inorganic concentrations at seven sampling sites were pH 7.9, COD 7.3mg/l, $NO_3-N$ 1.2mg/l, $Na^+$ 6.2mg/l, $Cl^-$ 14.8mg/l, EC 0.13dS/m, $PO_4\;^{3-}$ 0.21mg/l, $K^+$ 2.6mg/l, $Ca^{2+}$ 10.8mg/l,$Mg^{2+}$ 2.9mg/l, $SO_4\;^{2-}$ 10.5mg/l, $Fe^{3+}$ and $Zn^{2+}$ 0.02mg/l. The monthly average value of COD, $NO_3-N$, $Na^+$ and $Cl^-$ showed highest peak in July $8.4{\sim}11.6$, $1.1{\sim}1.7$, $5.4{\sim}13.1$ $18.9{\sim}27.9mg/l$. The highest region of average COD, $NO_3-N$, $Na^+$ and $Cl^-$ were Weola pumping station, $8.8{\sim}11.3$, $1.6{\sim}2.4$, $9.0{\sim}10.2$ and $21.7{\sim}23.0mg/l.$ The ionic $copmposition({\Sigma}A/{\Sigma}C)$ : ratio between total equivalant of anions and canon) of Nam river was higher at Weola pumping station than other topography. The EC was positively correlated with $K^+$, $Ca^{2+}$, $Mg^{2+}$, $Na^+$, $Cl^-$ and $SO_4\;^{2-}$.