• The Korean Journal of Quaternary Research
• /
• v.21 no.1
• /
• pp.15-26
• /
• 2007

A wide tree-ring data network from Western Himalayan region as well as from Central and Peninsular India have been established by the Indian Institute of Tropical Meteorology (IITM), Pune, India. This includes several ring width and density chronologies of Himalayan conifers (Pinus, Picea, Cedrus, Abies)covering entire area of Western Himalaya and teak (Tectona grandis L.F.) from central and peninsular India. Many of these chronologies go back to $15^{th}$ century. Tree-ring based reconstructed pre-monsoon (March-April-May) summer climate of Western Himalaya do not show any significant increasing or decreasing trend since past several centuries. High altitude tree-ring chronologies near tree line-glacier boundary are sensitive to the winter temperature. Unprecedented higher growth in recent decades is closely associated with the warming trend over the Himalayan region. Dendroclimatic analysis of teak (Tectona grandis) from Central and Peninsular India show significant relationship with pre-monsoon and monsoon climate. Moisture index over the region indicates strong association with tree-ring variations rather than the direct influence of rainfall. It is evident that, two to three consecutive good monsoon years are capable of maintaining normal or above normal tree growth, even though the following year is low precipitation year.

• Journal of the Korean Institute of Rural Architecture
• /
• v.20 no.3
• /
• pp.47-56
• /
• 2018

This study is to research the military remains of Korean War(1950~53) focused on Yeonchen, Cheorwon, and Hwacheon-gun in the central border of DMZ. The Yeoncheon-gun is installing 'Yeolsoe' and 'Taepung' observatory in the frontline battlefield adjacent to Southern Limit Line(SLL), and not only protects many military remains including war memorial and crematory facilities of UN troops, but also utilizes them as active educational places. The Cheorwon-gun is actively making known 'Baengmagoji memorial, 'Labor party office' and other buildings adjacent to 'Tourist security DMZ', but needs to set up many monuments around battlefields of 'Gimhwa' and 'Daeseongsan' adjacent to 'Eco-peace park DMZ'. With the battlefield of 'Paroho' as the center, which our troops made brilliant military gains during the war, the Hwacheon-gun protects and informs military remains such as '643 and 490 battlefields', 'Kkeomeok and Guman bridge'. Developing a network for military remains in connection with the annual local festivals, the experience tour and security will be available at these places.

• Journal of Oral Medicine and Pain
• /
• v.6 no.1
• /
• pp.15-18
• /
• 1981

The author had selected the roots and root-canal as measurable parts and sought the area ratio by measuring the respective areas of the root. Further, heplotted out a root caual index and studied the correlation with age. The teeth used as reserch material were permanent maxillary central incisors of Korean female. Some 296 teeth of known age were selected on condition that there is no caries or filling material and that they were not malformed in showing normal signs in roentgenograms. The $3" {\times} 4"$ printing paper so as to measure easily. On the ocassion of measureing the area of measured parts with a planimeter (Koizumi, type kp-27, Japan), the cervical lines were joined up into a straight line on a photograph (Figure 1) Root canal index = Area of the root / Area of the root canal The results of the root canal index in Korean female age groups were as follows : 1. The root canal index of maxilary central incisor in women was 4.74 im 20 years of age, 5.44 in 30, 5.90 in 40, 6.32 in 50, 6.63 in 60 in the order. 2. Root canal index and age were in positive correlation ; there was a tendency that the root canal index increase as age advances. 3. The regression equation was as follows : Y = 5.36x + 7.71 (r = 0.54, n= 296 ) (Y = estimated age, x = root canal index)

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.57.4-58
• /
• 2018

We explore the role of various environments in triggering star formation (SF) and narrow-line active galactic nucleus (AGN) in SDSS spiral galaxies and the SF-AGN connection, using a volume-limited sample with $M_r$ < -19.5 and 0.02 < z < 0.055 selected from the SDSS Release 7. To avoid the dependency of AGN activity on bulge mass, the central velocity dispersion of the sample galaxies is limited to have a narrow range of $130{\leq}{\sigma}{\leq}200km\;s^{-1}$. We note that in gas sufficient galaxies, AGN feeding lags behind starburst, whereas as the gas exhausts, the SF slows down and AGN seems to even prevent the SF, and thus divide the high-${\sigma}$ sample into two subsamples according to their cold gas content at central region traced by fiber star formation rate, $SFR_{fib}$. We find that a high density (cluster) environment causes a significant increase in AGN activity as well as gas depletion in host galaxies. However, the finding is only noticeable in the high-${\sigma}$ and low $SFR_{fib}$ sample. It seems that a galaxy interaction with the nearest neighbor directly affects the SF of the central region. However, it is unclear whether it directly affects AGN activity.

• Journal of Power Electronics
• /
• v.9 no.2
• /
• pp.320-333
• /
• 2009

A Photovoltaic (PV) system's power output varies with the change of climate. Frequency deviations, tie line voltage swings are caused by the varying PV power when large PV power from several PV systems is fed in the utility. In this paper, to overcome these problems, a simple coordinated control method for smoothing the variations of combined PV power from multiple PV systems is proposed. Here, output power command is formed in two steps: central and local. Fuzzy control is used to produce the central smoothing output power command considering insolation, variance of insolation and absolute average of frequency deviation. In local step, a simple coordination is kept between the central power command and the local power commands by producing a common tuning factor. Power converters are used to achieve the same output power as local command power employing PI control law for each of the PV generation systems. The proposed method is compared with the method where conventional Maximum Power Point Tracking (MPPT) control is used for each of the PV systems. Simulation results show that the proposed method is effective for smoothing the output power variations and feasible to reduce the frequency deviations of the power utility.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.5 no.1
• /
• pp.23-32
• /
• 2002

The introduction of hybrid and exploitation of heterosis has played a vital role in Indian sericulture industry, which clearly depicts a quantum jump in silk production during the last four decades. Since, the introduction of heterosis, progress in silkworm breeding has depended on success or failure in identifying better combiners. Systematic procedures developed have enabled the breeders to identify the best combiners by combining ability test, line ${\TIMES}$ tester analysis or $D^2$ analysis for maximum expression of heterosis. The level of heterosis expressed in the crossbreed population is determined by the interaction between genotype and prevailing environmental factors. Except some of the pre and post cocoon parameters, heterosis is invariably higher in single crosses compared to three-way and double crosses. However, during hot and humid season, when rearing of F1 bivoltine hybrid is unsuccessful at field level and indigenous races results in very low and poor quality yield, three-way and double crosses can play an important role as an intermediary technology. The objective of this article is to review briefly the concept and causes of heterosis, utilization of different forms of heterosis in silk production and its significance in silkworm, Bombyx mori breeding.

• Nuclear Engineering and Technology
• /
• v.46 no.2
• /
• pp.183-194
• /
• 2014

Recently, a CANDU digital reactivity computer system (CDRCS) to measure the worth of the liquid zone controller in a CANDU-6 was developed and successfully applied to a physics test of refurbished Wolsong Unit 1. In advance of using the CDRCS, its measureable reactivity range should be investigated and confirmed. There are two reasons for this investigation. First, the CANDU-6 has a larger reactor and smaller excore detectors than a general PWR and consequently the measured reactivity is likely to reflect the peripheral power variation only, not the whole core. The second reason is photo neutrons generated from the interaction of the moderator and gamma-rays, which are never considered in a PWR. To evaluate the limitations of the CDRCS, several tens of three-dimensional steady and transient simulations were performed. The simulated detector signals were used to obtain the dynamic reactivity. The difference between the dynamic reactivity and the static worth increases in line with the water level changes. The maximum allowable reactivity was determined to be 1.4 mk in the case of CANDU-6 by confining the difference to less than 1%.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.3
• /
• pp.37-44
• /
• 2019

In this study, we propose the automatic extraction method of Rescue Requests from Drone Images. A central object is extracted from each image by using central object extraction method[7] before classification. A central object in an images are defined as a set of regions that is lined around center of the image and has significant texture distribution against its surrounding. In this case of artificial objects, edge of straight line is often found, and texture is regular and directive. However, natural object's case is not. Such characteristics are extracted using Edge direction histogram energy and texture Gabor energy. The Edge direction histogram energy calculated based on the direction of only non-circular edges. The texture Gabor energy is calculated based on the 24-dimension Gebor filter bank. Maximum and minimum energy along direction in Gabor filter dictionary is selected. Finally, the extracted rescue requestor object areas using the dominant features of the objects. Through experiments, we obtain accuracy of more than 75% for extraction method using each features.

• Structural Engineering and Mechanics
• /
• v.84 no.5
• /
• pp.591-604
• /
• 2022

A gravity wall combined with an anchoring lattice frame (a combined retaining structure) is adopted at a typical engineering site at Dali-Ruili Railway Line China. Where, the combined retaining structure supports a soil deposit covering on different inclined rock slopes. With an aim to investigate and compare the effects of inclined rock slopes on the response of combined retaining structure under seismic excitation, three groups of shaking table tests are conducted. The rock slopes are shaped as planar surfaces inclined at angles of 20°, 30°, and 40° with the horizontal, respectively. The shaking table tests are supplemented by dynamic numerical simulations. The results regarding the horizontal acceleration response, vertical acceleration response, permanent displacement mode, and axial anchor force are comparatively examined. The acceleration response is more susceptible to outer structural profile of combined retaining structure than to inclined angle of rock slope. The permanent displacement decreases when the inclined angle of the rock slope increases within a range of 20°-40°. A critical inclined angle of rock slope exists within a range of 20°-40°, and induces the largest axial anchor force in the combined retaining structure.

• Journal of the Korea Safety Management & Science
• /
• v.26 no.1
• /
• pp.9-14
• /
• 2024

Restraints of Branch Lines are used as earthquake-resistant support devices for fire-fighting pipes along with sway brace devices. The central types are aligned and fixed in a straight line with center of the pipe, but the eccentric types are fixed to on side of the pipe, so a bending moment occurs. In this study, three specimens each of central type and eccentric type were installed at an angle of 45° from the vertical and a monotonic compression load of 1340N was applied. All central type samples satisfied 17.8mm of the allowable displacement, but all eccentric type samples failed to meet the target load and buckled. Therefore, when considering the performance of eccentric type restraints, both compressive load and bending moment must be considered. Even through material mechanics calculations, the yield stress of eccentric type - 3/8 inch all threaded steel bolt - exceeds 320Mpa of the allowable stress. A experiment standards need to be established for eccentric type restraints.