• 한국농공학회지
• /
• 제34권E호
• /
• pp.12-19
• /
• 1992

The effects of drainage system on evapotranspiration and drainage flows are studied. Data from drainage field experiment at Castalia in North Central Branch, Ohio Agricultural Research and Development Center were used in this study. A water table management model, ADATP (Agricultural Drainage and Pesticide Transport), which was developed by combining the GLEAMS and the subsurface drainage part of the DRAINMOD model with several modifications, was evaluated and used to predict hydrologic components. The ET is very much affected by the presence of tile drainage system but not significantly affected by the surface drainage system. The combined surface and subsurface drainage system gives the largest total outflow values while the surface drainage only system gives the smallest. Comparisons of model predicted and measured values of surface runoff only, subsurface drainage only, and combined surface runoff and subsurface drainage system are in satisfactory agreement. The model predicted values are within the range of the variations of the observed replications in general. Based on the results of the model evaluation study, it is concluded that ADAPT model can be used to design water table management systems.

• 한국터널지하공간학회 논문집
• /
• 제8권1호
• /
• pp.13-20
• /
• 2006

본 연구에서는 터널구조물 장대화로 인한 기존 배수시스템의 시공상의 어려움과 기능 저하문제 동을 해결하기위하여 바닥배수판을 이용한 새로운 터널배수시스템을 제안하고 성능평가를 위한 기초연구를 수행하였다. 제안된 배수시스템은 기존의 측방향 배수관, 횡방향 배수관 및 유공관 등이 생략 가능한 배수시스템이다. 그러나 바닥배수판의 형상 등을 고려한 통수능분석 및 설계기준 등이 정립되어 있지 않다. 따라서, 본 연구에서는 수리모형 실험을 통하여 바닥배수판의 돌기부 형상 및 위치와 유량조건별 통수능의 상관관계를 분석하였다. 바닥배수판 돌기부의 형상 및 유수방향 간격은 흐름에 대한 저항성 차이로 언하여 통수능에 큰 영향을 미치며, 앞뒤둥근형 돌기부 형상이 가장 통수능 확보에 유리한 것으로 나타났다. 또한 돌기부의 유수방향 간격이 좁을수록 바닥배수판의 통수능을 향상시킬 수 있다.

• Geomechanics and Engineering
• /
• 제17권2호
• /
• pp.181-194
• /
• 2019

Due to the seepage of groundwater, the resisting force of slopes decreases and the sliding force increases, resulting in significantly reduced slope stability. The instability of most natural slopes is closely related to the influence of groundwater. Therefore, it is important to study slope stability under groundwater seepage conditions. Thus, using a simplified seepage model of groundwater combined with the analysis of stresses on the slip surface, the limit equilibrium (LE) analytical solutions for two- and three-dimensional slope stability under groundwater seepage are deduced in this work. Meanwhile, the general nonlinear Mohr-Coulomb (M-C) strength criterion is adopted to describe the shear failure of a slope. By comparing the results with the traditional LE methods on slope examples, the feasibility of the proposed method is verified. In contrast to traditional LE methods, the proposed method is more suitable for analyzing slope stability under complex conditions. In addition, to facilitate the optimization of drainage design in the slope, stability charts are drawn for slopes with different groundwater tables. Furthermore, the study concluded that: (1) when the hydraulic gradient of groundwater is small, the effect on slope stability is also small for a change in the groundwater table; and (2) compared with a slope without a groundwater table, a slope with a groundwater table has a larger failure range under groundwater seepage.

• 대한지리학회지
• /
• 제39권6호
• /
• pp.833-844
• /
• 2004

추가령 열곡에서 열하분출에 의한 용암대지가 형성되면서 기존의 하곡들이 매몰되어 하계망 혼란이 일어나고, 새로운 분수계가 형성과 함께 하계망 재편성이 진행되고 있다. 이 지역은 안변 남대천, 북한강, 임진강, 한탄강 유역이 접하는 복잡한 분수계 혼란 지역으로서 분수계의 핵심 지점은 중심분출 화산인 평강의 오리산(453m)과 680봉이며, 보다 평탄한 곳에서는 하천 쟁탈이 복잡하게 전개되고, 평탄면에서 유역이 가까이 접하면서 쟁탈 전선도 형성된다. 특히 오리산은 4개의 분수계를 가르는 분수점 기능을 한다. 고도가 높은 산록에서는 두부 침식에 의해 하천 쟁탈이 발생한다. 수문지형적으로는 용암이 하곡을 메우면서 범람원의 면적이 줄어들어 호우에 의한 침수 가능성이 높아지게 되며, 보다 활발한 용암대지 개석작용을 유발하는 것으로 판단된다.

• 한국유체기계학회 논문집
• /
• 제19권3호
• /
• pp.19-24
• /
• 2016

Oil sands are a mixture of sand, clay, and a high-viscosity petroleum called bitumen. Steam-Assisted Gravity Drainage (SAGD) is the most viable and environmentally safe recovery technology for extracting bitumen. It extracts the viscosity-lowered bitumen by high pressure, high temperature steam injected into the bitumen reservoir. The steam is produced at the Central Processing Facility (CPF). Typically, more than 90% of the energy consumed in producing bitumen are used to generate the steam. Fuels are employed in the process, which cause economic and environmental problems. This paper explores the retrofit of heat exchanger network to reduce the usage of hot and cold utilities. The hot and cold utilities are reduced respectively 6% and 37.3% which in turn resulted in 5.3% saving of total annual cost by improving the existing heat exchanger network of the CPF.

• International Journal of Advanced Culture Technology
• /
• 제8권2호
• /
• pp.260-269
• /
• 2020

The Steam Assisted Gravity Drainage (SAGD) process is an enhanced method to extract oil from bitumen which involves surface and central process facilities. This paper describes the Central Process Facilities (CPF) of SAGD and proposes several retrofit plans to the Heat Exchanger Network (HEN). In this approach, the process integration scheme is applied to estimate the energy saving in HENs, and various cases are modeled in favor of a commercial simulator. Throughout this work, a minimum approach temperature of 10℃ is assumed. The results reveal that, due to the HEN optimization using process integration, the heating and cooling duties can be reduced to 29.68MW and 1.886MW, respectively. Compared with the Husky case, all cases considered in this study indicate a potential reduction of at least 6% in total cost, including investment and operation costs.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권11호
• /
• pp.4875-4883
• /
• 2016

Background and objective: Breast cancer-related lymphoedema (BCRL) is a disabling complication with long term impact on quality on life after breast cancer treatment. Its management remains a major challenge for patients and health care professionals; the goal of this overview was to summarize effects of different treatment strategies for patients with BCRL. Methods: A thorough search was undertaken to allow a systematic review or meta-analysis of treatments for BCRL. Two investigators independently selected studies and abstracted the data. Results: Combined physical therapy (CPT) with different combinations of surgery, oral pharmaceuticals, low-level laser therapy, weight reduction, mesenchymal stem cell therapy, kinesio tex taping, and acupuncture might be effective in reducing lymphoedema, but exercise demonstrated no obvious benefit. The results of direct comparisons showed CPT might be more effective than standard physiotherapy (ST). Manual lymphatic drainage (MLD) may not offer additional benefits to ST for swelling reduction, but could facilitate compression bandaging. MLD seemed to have similar effects with self-administered simple lymphatic drainage (SLD) or using an intermittent pneumatic compression pump (IPC). IPC might also not be associated with additional effectiveness for CPT. Efficacy of stem cell therapy vs. compression sleeve or CPT, as well as the effects of daflon and coumarin could not be established. Conclusion: Although many treatments for BCRL might reduce lymphoedema volume, their effects were not well established. The quality of many of the original studies in the included reviews was not optimal, so that in future randomized control trials are a high priority.

• 대한지리학회:학술대회논문집
• /
• 대한지리학회 2004년도 추계학술대회
• /
• pp.47-47
• /
• 2004

• 대한치과의사협회지
• /
• 제5권1호
• /
• pp.63-66
• /
• 1964

A case of 20-year-old man involving a dens in dents with dentoalveolar abscess in the symphysis has been presented. 1. The patient pressented free drainage through the fistulous opening onn labial gingiva in area of left mandibular dentral and lateral incisors. 2. Roentgenographs revealed roentgenolucent shadows around left mandibular central and lateral incisors, dens in dente, was noticed.

• BMB Reports
• /
• 제39권2호
• /
• pp.178-182
• /
• 2006

Four strains of Acidithiobacillus ferrooxidans with different iron oxidation capacity were isolated from different mine drainage stations. The 16S rRNA gene of these strains were cloned and sequenced. Based on our sequences analysis on the four strain and the data on the other strains deposited in Genbank, all A. ferrooxidans may be classified into three phylogenetic groups. The analysis data showed that nucleotide variables (signature sites) were detected in 21 positions, and most of them were found in the first 800bp from 5' terminal except position 970 and 1375. Interestingly, the first 13 signature sites were located in two main regions:the first region (position 175-234) located in V2 while the second region (position 390-439) were detected in constant region between V2 and V3. Furthermore, the secondary structure and minimal free energy were determined in two regions among strains of three groups. These results may be useful in characterizing the microevolutionary mechanisms of species formation and monitoring in biohydrometallurgical application.