• Journal of Korean Neurosurgical Society
• /
• v.49 no.6
• /
• pp.351-354
• /
• 2011

Objective : This investigation was conducted to evaluate a new, safe entry point for the C2 pedicle screw, determined using the anatomical landmarks of the C2 lateral mass, the lamina, and the isthmus of the pars interarticularis. Methods : Fifteen patients underwent bilateral C1 lateral mass-C2 pedicle screw fixation, combined with posterior wiring. The C2 pedicle screw was inserted at the entry point determined using the following method : 4 mm lateral to and 4 mm inferior to the transitional point (from the superior end line of the lamina to the isthmus of the pars interarticularis). After a small hole was made with a high-speed drill, the taper was inserted with a 30 degree convergence in the cephalad direction. Other surgical procedures were performed according to Harm's description. Preoperatively, careful evaluation was performed with a cervical X-ray for C1-C2 alignment, magnetic resonance imaging for spinal cord and ligamentous structures, and a contrast-enhanced 3-dimensional computed tomogram (3-D CT) for bony anatomy and the course of the vertebral artery. A 3-D CT was checked postoperatively to evaluate screw placement Results : Bone fusion was achieved in all 15 patients (100%) without screw violation into the spinal canal, vertebral artery injury, or hardware failure. Occipital neuralgia developed in one patient, but this subsided after a C2 ganglion block. Conclusion : C2 transpedicular screw fixation can be easily and safely performed using the entry point of the present study. However, careful preoperative radiographic evaluation, regardless of methods, is mandatory.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12C
• /
• pp.1652-1659
• /
• 2004

In this paper, we propose the algorithm that automatically measures the height of the object to move on the base plane by using the geometric information. To extract a moving object from real-time images creates the background image and each pixel is modeled by the three values. The extracted region is represented by cardboard model and calculates the coordinate center in the each part. The top and bottom point of an object are extracted by the calculated coordinate center and an iterative computation. The two points, top and bottom, are used for measuring the height. Given the vanishing line of the ground plane, the vertical vanishing point, and at least one reference height in the scene; then the height of any point from the ground may be computed by specifying the image of the point and the image of the vertical intersection with the ground plane at that point. Through a confidence valuation of the height to be measured, we confirmed similar actual height and result in the simulation experiment.

• Journal of Korean Society of Rural Planning
• /
• v.24 no.4
• /
• pp.99-119
• /
• 2018

Unit load factor, which is used for the quantification of non-point pollution in watersheds, has the limitation that it does not reflect spatial characteristics of soil, topography and temporal change due to the interannual or seasonal variability of precipitation. Therefore, we developed the method to estimate a watershed-scale non-point pollutant load using seasonal forecast data that forecast changes of precipitation up to 6 months from present time for watershed-scale water quality management. To establish a preemptive countermeasure against non-point pollution sources, it is possible to consider the unstructured management plan which is possible over several months timescale. Notably, it is possible to apply various management methods such as control of sowing and irrigation timing, control of irrigation through water management, and control of fertilizer through fertilization management. In this study, APEX-Paddy model, which can consider the farming method in field scale, was applied to evaluate the applicability of seasonal forecast data. It was confirmed that the rainfall amount during the growing season is an essential factor in the non-point pollution pollutant load. The APEX-Paddy model for quantifying non-point pollution according to various farming methods in paddy fields simulated similarly the annual variation tendency of TN and TP pollutant loads in rice paddies but showed a tendency to underestimate load quantitatively.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.2
• /
• pp.99-110
• /
• 2023

In this paper, we propose a system termed ForestLi that can accurately estimate the diameter at breast height (DBH) and tree height using LiDAR point cloud data. The ForestLi system processes LiDAR point cloud data through the following steps: downsampling, outlier removal, ground segmentation, ground height normalization, stem extraction, individual tree segmentation, and DBH and tree height measurement. A commercial system, such as LiDAR360, for processing LiDAR point cloud data requires the user to directly correct errors in lower vegetation and individual tree segmentation. In contrast, the ForestLi system can automatically remove LiDAR point cloud data that correspond to lower vegetation in order to improve the accuracy of estimating DBH and tree height. This enables the ForestLi system to reduce the total processing time as well as enhance the accuracy of accuracy of measuring DBH and tree height compared to the LiDAR360 system. We performed an empirical study to confirm that the ForestLi system outperforms the LiDAR360 system in terms of the total processing time and accuracy of measuring DBH and tree height.

• Journal of Korean Dental Science
• /
• v.2 no.2
• /
• pp.53-55
• /
• 2009

A foreign body may present diagnostic difficulties. If the foreign body has been in existence for a long time, the diagnosis may be even more complex. This report shows an unusual foreign body that turned out to be the cap of a ball point pen.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.311-313
• /
• 2003

There have been public attraction and studies about distributed generation systems. But protective relay must be installed between utility system and customer owned distributed generation system has not been developed. So this paper describes the development of a digital protective relay for interconnection. The developed protective relay includes protective elements required by KEPCO at the interconnection point.

• Proceedings of the KIEE Conference
• /
• 2004.11b
• /
• pp.211-213
• /
• 2004

실시간 데이터를 대상으로 하는 전력 계통응용 프로그램을 개발하기 위해서는 SCADA 시스템이 다루는 Point Data를 Device Level의 속성으로 해석할 수 있어야 한다. 본 논문에서는 이러한 관계를 나타낼 수 있는 Mapping 기법을 제안하고 실제 응용 프로그램에 적용한 사례를 소개하고자 한다.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.4
• /
• pp.289-299
• /
• 1996

This study has been performed to investigate into some effects of power density and traverse speed of laser beam on the microstructure, hardness and residual stress of AISI 4140 treated by laser surface hardening technique. Optical micrograph has shown that large martensite and a small amount of retained austenite in outermost surface layer and fine lath martensite in inner surface hardened layer are formed under the condition of a given power density and traverse speed. Hardness measurements have revealed that as the power density increases at a given 2.0m/min of the traverse speed, the maximum hardness values of outermost surface hardened layer is increased from Hv=635 to Hv=670. X-ray analysis for residual stress has exhibited that low compressive residual stress values are obtained in center point of the cress section of surface hardened layer with in mid point between the edge and the center point, about 1.5mm from the center point, due simply to a difference in self-quenching rate. It has been shown that the higher the power density at a given traverse speed and the olwer the traverse speed at a given power density, the more the compressive residual stress values are increased due to an increase in the input heat of laser beam.

• Journal of Broadcast Engineering
• /
• v.17 no.5
• /
• pp.808-816
• /
• 2012

Face recognition has been actively studied and developed in various fields. In recent years, interest point extraction algorithms mainly used for object recognition were being applied to face recognition. The SURF(Speeded Up Robust Features) algorithm was used in this paper which was one of typical interest point extraction algorithms. Generally, the interest points extracted from human faces are less distinctive than the interest points extracted from objects due to the similar shapes of human faces. Thus, the accuracy of the face recognition using SURF tends to be low. In order to improve it, we propose a face recognition algorithm which performs interest point extraction by SURF and the Gabor wavelet transform to extract descriptors from the interest points. In the result, the proposed method shows around 23% better recognition accuracy than SURF-based conventional methods.

• Korean Journal of Acupuncture
• /
• v.33 no.2
• /
• pp.75-83
• /
• 2016

Objectives : A previous study demonstrated that the connecting points of three yang meridians attenuated changes of nNOS, and Norepinephrine(NE) in rats. The current study investigated the changes in nNOS, NO and NE upon the needle insertion at varying depths at the connecting point of three yin meridians of the hand. Methods : Needles were inserted into rats, on both left and right sides of the connecting point, including the LU7, HT5 and PC6 acupoints which are three yin meridians of the hand. After insertion, needles were retained for five minutes. Each acupuncture groups were treated acupuncture at each acupoint and at the depths of superficial, middle and deep layer. After the retention, blood was drawn via cardiac puncture, and tissues of each point near meridian vessel was extracted to examine the changes in the expression of nNOS, NO and NE. Results : Compared with the superficial layer group, nNOS production significantly decreased in the middle and deep layer at LU7 acupoint group and in the deep layer at HT5, PC6 acupoint group. The tissue NE decreased in the deep layer on PC6 acupoint and the plasma NE increased at the middle layer at LU7 acupoint group but decreased at the deep layer on at LU7 acupoint group. Conclusions : Acupuncture at connecting points of three yin meridians of the hand can regulate the activities of nNOS, and NE.