• Smart Structures and Systems
• /
• 제12권1호
• /
• pp.1-22
• /
• 2013

Magnetic nanoparticle based bioseparation in microfluidics is a multiphysics phenomenon that involves interplay of various parameters. The ability to understand the dynamics of these parameters is a prerequisite for designing and developing more efficient magnetic cell/bio-particle separation systems. Therefore, in this work proof-of-concept experiments are combined with advanced numerical simulation to design and optimize the capturing process of magnetic nanoparticles responsible for efficient microfluidic bioseparation. A low cost generic microfluidic platform was developed using a novel micromolding method that can be done without a clean room techniques and at much lower cost and time. Parametric analysis using both experiments and theoretical predictions were performed. It was found that flow rate and magnetic field strength greatly influence the transport of magnetic nanoparticles in the microchannel and control the capturing efficiency. The results from mathematical model agree very well with experiments. The model further demonstrated that a 12% increase in capturing efficiency can be achieved by introducing of iron-grooved bar in the microfluidic setup that resulted in increase in magnetic field gradient. The numerical simulations were helpful in testing and optimizing key design parameters. Overall, this work demonstrated that a simple low cost experimental proof-of-concept setup can be synchronized with advanced numerical simulation not only to enhance the functional performance of magneto-fluidic capturing systems but also to efficiently design and develop microfluidic bioseparation systems for biomedical applications.

• 한국군사과학기술학회지
• /
• 제14권4호
• /
• pp.732-739
• /
• 2011

A fuel cell/secondary battery hybrid power generation system could extend well beyond the efficiency and interoperability of the conventional diesel generator. The suggested power source system consists of 2.3 kW class PEMFC, 100 Ah lithium polymer battery, and two DC/DC converters by serial connection type. It was known that interoperability of sub-systems is the key factor for stable and optimal control of the hybrid power generation system. The modeling and simulation methods have been proposed to reduce the number of configurations and performance tests for components selection and select the optimized control condition of the power generation system. The control model for power source system is implemented based on the empirical formulation and carried out in the Matlab/Simulink environment. The results show that the simulation can be used to establish the algorism of prototype and increase the durability of the power source system.

• Nuclear Engineering and Technology
• /
• 제41권10호
• /
• pp.1347-1360
• /
• 2009

A multi-dimensional component for the thermal-hydraulic system analysis code, MARS, was developed for a more realistic three-dimensional analysis of nuclear systems. A three-dimensional and two-fluid model for a two-phase flow in Cartesian and cylindrical coordinates was employed. The governing equations and physical constitutive relationships were extended from those of a one-dimensional version. The numerical solution method adopted a semi-implicit and finite-difference method based on a staggered-grid mesh and a donor-cell scheme. The relevant length scale was very coarse compared to commercial computational fluid dynamics tools. Thus a simple Prandtl's mixing length turbulence model was applied to interpret the turbulent induced momentum and energy diffusivity. Non drag interfacial forces were not considered as in the general nuclear system codes. Several conceptual cases with analytic solutions were chosen and analyzed to assess the fundamental terms. RPI air-water and UPTF 7 tests were simulated and compared to the experimental data. The simulation results for the RPI air-water two-phase flow experiment showed good agreement with the measured void fraction. The simulation results for the UPTF downcomer test 7 were compared to the experiment data and the results from other multi-dimensional system codes for the ECC delivery flow.

• 한국콘텐츠학회논문지
• /
• 제5권6호
• /
• pp.65-73
• /
• 2005

인터넷의 급속한 보급과 대용량 멀티미디어 서비스에 대한 요구가 나날이 증가하고 있다. 기존의 무선랜은 도달거리가 짧아서 가입자가 기지국(Base Station)에서 멀어지면 서비스 품질이 저하되고, 무선인터넷은 사용비용이 높다. 최근에 세계 최초로 국내에서 개발한 휴대 인터넷 시스템인 와이브로(WiBro: Wireless Broadband Internet) 시스템은 휴대폰과 무선 랜의 중간 영역에 위치한 이동초고속인터넷서비스이다. 본 논문에서는 와이브로 시스템의 근간을 이루는 IEEE 802.16 BWA을 기반으로 멀티미디어 서비스를 제공하기 위해서 서비스별 트래픽 모델과 특성을 분석하고, 다양한 트래픽 혼합 비율에 따라 시뮬레이션을 수행하였으며, 이를 토대로 최종적으로는 WiBro 시스템에서 셀 당 수용 가능한 최대 가입자 수를 산출하였다.

• 전기학회논문지
• /
• 제65권12호
• /
• pp.2197-2210
• /
• 2016

Recently, the trend of zero emissions has increased in automotive engineering because of environmental problems and regulations. Therefore, the development of battery electric vehicles (EVs), hybrid/plug-in hybrid electric vehicles (HEVs/PHEVs), and fuel cell electric vehicles (FCEVs) has been mainstreamed. In particular, for light-duty electric vehicles, improvement in electric motor performance is directly linked to driving range and driving performance. In this paper, using an improved design for the interior permanent magnet synchronous motor (IPMSM), the EV driving range for the light-duty EV was extended. In the electromagnetic design process, a 2D finite element method (FEM) was used. Furthermore, to consider mechanical stress, ANSYS Workbench was adopted. To conduct a vehicle simulation, the vehicle was modeled to include an electric motor model, energy storage model, and regenerative braking. From these results, using the advanced vehicle simulator (ADVISOR) based on MATLAB Simulink, a vehicle simulation was performed, and the effects of the improved design were described.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1902-1908
• /
• 2022

In many of the complex systems modeled in the field of nuclear engineering, it is often useful to use linear regression-based analyses to analyze relationships between model parameters and responses of interests. In cases where the response of interest is calculated by a simulation which uses Monte Carlo methods, there will be some uncertainty in the responses. Further, the reduction of this uncertainty increases the time necessary to run each calculation. This paper presents some discussion on how the Monte Carlo error in the response of interest influences the error in computed linear regression coefficients. A mathematical justification is given that shows that when performing linear regression in these scenarios, the error in regression coefficients can be largely independent of the Monte Carlo error in each individual calculation. This condition is only true if the total number of calculations are scaled to have a constant total time, or amount of work, for all calculations. An application with a simple pin cell model is used to demonstrate these observations in a practical problem.

• 인터넷정보학회논문지
• /
• 제18권6호
• /
• pp.15-23
• /
• 2017

Wireless power transmission (WPT) for wireless charging is currently attracting much attention as a promising approach to miniaturize batteries and increase the maximum total range of an electric vehicle. The main advantage of the laser power beam (LPB) approach is its high power transmission efficiency (PTE) over long distance. In this paper, we present the design of a laser power beam based WPT system, which has a best WPT channel selection technique at the receiver end when multiple power transmitters and single power receiver are operated simultaneously. The transmitters send their transmission channel information via optically modulated laser pulses. The receiver uses the received signal strength indicator and digitized data to choose an optimum power transmission path. We modeled a vertical multi-junction photovoltaic cell array, and conducted an experiment and simulation to test the feasibility of this system. From the experimental result, the standard deviation between the mathematical model and the measured values of normalized energy distribution is 0.0052. The error between the mathematical model and measured values are acceptable, thus the validity of the model is verified.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권11호
• /
• pp.4203-4223
• /
• 2021

Accelerated by the Internet of Things (IoT), the need for further technical innovations and developments within wireless communications beyond the fifth generation (B5G) networks is up-and-coming in the past few years. High altitude platform station (HAPS) communication is expected to achieve such high levels that, with high data transfer rates and low latency, millions of devices and applications can work seamlessly. The HAPS has emerged as an indispensable component of next-generations of wireless networks, which will therefore play an important role in promoting massive IoT interconnectivity with 6G. The performance of communication and key technology mainly depend on the characteristic of channel, thus we propose an efficient Markov chain based channel model, then analyze the HAPS communication system's uplink capability and swing effect through experiments. According to the simulation results, the efficacy of the proposed scheme is proven to meet the requirements of ubiquitous connectivity in future IoT enabled by 6G.

• 전자공학회논문지S
• /
• 제36S권6호
• /
• pp.87-95
• /
• 1999

본 논문에서는 ATM망에서 3차원 동영상 데이터의 시뮬레이션 모델을 제시한다. 이 모델은 슬라이스 레벨에 기초를 두며, PVAR(Projected Vector Autoregressive)모델이라고 명한다. PVAR 모델은 자기상관성(Autocorrelation)과 히스토그램(Histogram)특성을 만족하기 위해 AR(Autoregressive)모델에 기초로 모델링 되고 프로젝션 함수(Projection function)에 의해 실제 데이터를 매핑 한다. 프로젝션 함수로는 CDPF(cumulative distribution probability function)를 사용한다. 이때 과정은 슬라이스 단위로 수행된다. 제안된 모델은 자기 상관성과 히스토그램을 만족시키는데 좋은 성능을 보여주고, 네트워크 성능 분석에 중요하다. 이어서 이것을 주기적 평균값에 의한 Smoothing 방법에 적용한다. 일반적으로 QoS는 버퍼(buffer)에서의 셀 손신과 최대 지연에 관계된 CLR에 달려 있다. 따라서 제안한 Smoothing 기법은 QoS를 향상시키는데 이용할 수 있다.

• Korean Chemical Engineering Research
• /
• 제45권1호
• /
• pp.93-102
• /
• 2007

본 연구에서는 직접 메탄올 연료전지의 전기 화학 반응에 의해 발생하는 이산화탄소와 물의 조절을 위해 기체 발생과 흐름 현상을 관찰할 수 있는 3차원 모델을 개발하였다. 산화극 쪽에 발생한 기체의 조절은 직접 메탄올 연료전지를 설계하는데 중요한 문제이며, 연료 전지의 성능에 커다란 영향을 준다. 유로는 기체의 조절과 아주 밀접한 관계가 있으나 다양한 유로를 설계하고 실험하여 최적의 디자인을 찾는 것은 어렵고 바이폴라 플레이트의 높은 가격 때문에 많은 비용이 필요하다. 이 문제를 해결하기 위해 전산 유체역학 모델링 기법을 도입하였다. 전산 유체역학을 기반으로 하여 개발된 two-fluid 모델을 이용하여 유체의 흐름 패턴을 시각화 하여 분석함으로써 실험의 횟수를 줄일 수 있었고, 대표적인 4가지 연료전지 유로인 serpentine, zigzag, parallel, semi-serpentine 형태에 개발된 모델을 적용하여 속도, 압력, 메탄올 몰분율, 기체 몰분율 등을 계산하였다. 계산 결과를 이용하여 각 형태의 특성과 장단점을 파악하였고, 이를 바탕으로 가스를 효율적으로 제거할 수 있는 최적 유로를 설계 하였다.