• Animal cells and systems
• /
• 제16권2호
• /
• pp.121-126
• /
• 2012

In this study, a neural network (NN) modeling approach has been used to predict the mechanical and geometrical behaviors of mouse embryo cells. Two NN models have been implemented. In the first NN model dimple depth (w), dimple radius (a) and radius of the semi-circular curved surface of the cell (R) were used as inputs of the model while indentation force (f) was considered as output. In the second NN model, indentation force (f), dimple radius (a) and radius of the semi-circular curved surface of the cell (R) were considered as inputs of the model and dimple depth was predicted as the output of the model. In addition, sensitivity analysis has been carried out to investigate the influence of the significance of input parameters on the mechanical behavior of mouse embryos. Experimental data deduced by Fl$\ddot{u}$ckiger (2004) were collected to obtain training and test data for the NN. The results of these investigations show that the correlation values of the test and training data sets are between 0.9988 and 1.0000, and are in good agreement with the experimental observations.

• Journal of Communications and Networks
• /
• 제17권3호
• /
• pp.231-240
• /
• 2015

To facilitate the base station planning in high speed railway communication systems, it is necessary to consider the functional relationships between the base station transmit power and space parameters such as train velocity and cell radius. Since these functions are able to present some inherent system properties determined by its spatial topology, they will be referred to as the power-space functions in this paper. In light of the fact that the line-of-sight path persists the most power of the received signal of each passing train, this paper considers the average transmission rate and bounds on power-space functions based on the additive white Gaussian noise channel (AWGN) model. As shown by Monte Carlo simulations, using AWGN channel instead of Rician channel introduces very small approximation errors, but a tractable mathematical framework and insightful results. Particularly, lower bounds and upper bounds on the average transmission rate, as well as transmit power as functions of train velocity and cell radius are presented in this paper. It is also proved that to maintain a fixed amount of service or a fixed average transmission rate, the transmit power of a base station needs to be increased exponentially, if the train velocity or cell radius is increased, respectively.

• 대한골관절종양학회지
• /
• 제10권1호
• /
• pp.29-33
• /
• 2004

원위 요골의 거대 세포종은 빈도가 많지는 않다. 통상적으로 골 소파술 및 골 시멘트 충전술로 치료하지만, 재발한 경우나 처음부터 골피질 파괴가 심하고 관절 침범이 있을 경우에는 일괄 절제(en bloc resection) 후 근위 비골을 이용하여 재건하는 술 식이 많이 이용되어 왔다. 본 연구는 고식적 술 식으로 치료한 후 국소 재발한 원위 요골의 거대 세포종 환자에서, 근위 비골을 이용한 재건술을 시행하여도 일차 술 식 시 오염의 범위가 심하여 다시 재발할 가능성이 높아 초고분자량 폴리에틸렌(ultrahigh molecular weight polyethylene, UHMWPE)과 골수강내 고정물 및 골 시멘트를 조합하여 원위 요골을 재건한 1례를 보고 하고자 한다.

• 대한전자공학회논문지TC
• /
• 제49권2호
• /
• pp.56-66
• /
• 2012

단위 셀의 길이를 고정시키고 단위 셀의 폭과 via를 변화시켜 수평방향 방사가 억제되고 전방방향 방사가 증가하여 방사특성이 향상되는 inductive loaded 패치 안테나에 대하여 연구하였다. Inductive loaded 전송선을 구성하는 단위 셀의 구조 파라미터인 via 반경과 단위 셀 패치의 면적에 따라 분산 특성을 살펴보았다. 수평방향의 방사를 억제시키기 위해 inductive loaded 패치 안테나의 유효유전상수를 1과 가깝게 만드는 via의 반경과 단위 셀 패치의 폭을 결정하는 방법을 체계적으로 설명하였다. 5 GHz에서 동작하는 $5{\times}1$ inductive loaded 패치 안테나를 설계하여 방사특성을 전산모의한 결과 유효유전상수가 1보다 다소작을 때 E-평면 방향 수평 방사가 약 -15 dBi 이하로 크게 억제됨을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.968-970
• /
• 1999

The trend of increasing of portable electric devices and demand for global environmental conservation have demands the development of high energy density rechargeable batteries. Lithium polymer battery has excellent theoretical energy density and energy conversion efficiency. Lithium polymer battery, included solid polymer electrolyte(SPE), can be viewed as a system suitable for wide applications from thin film batteries for microelectronics to electric vehicle batteries. The purpose of this paper is to research and development of flyash anode for lithium polymer battery. We investigated AC impedance response and charge/discharge characteristics of flyash/SPE/Li cells. The radius of semicircle associated with the interfacial resistance of flyash/SPE/Li cell increased very slowly during discharge process from 3.11V to 0.478V. And then the cell resistance was decreased at discharge process from 10% SOC to 0% SOC. Also, The radius of semicircle associated with the interfacial resistance of flyash/SPE/Li cell decreasing very slowly during charge process. And then the cell resistance was increased after 20th discharge precess. The discharge capacity based on flyash of 1st and 20th cycles was 276mAh/g and 143mAh/g.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권3호
• /
• pp.886-900
• /
• 2015

Small cells are deployed in Heterogeneous Networks (HetNet) to improve overall performance. These access points can provide high-rate mobile services at hotspots to users. In a Small Cell Network (SCN), the good deployment of small cells can guarantee the performance of users on the basis of average and cell edge spectrum efficiency. In this paper, the performance of small cell deployment is analyzed by using system-level simulations. The positions of small cells can be adjusted according to the deployment radius and angle. Moreover, different Inter-Cell Interference Coordination (ICIC) techniques are also studied, which can be implemented either in time domain or in frequency domain. The network performances are evaluated under different ICIC techniques when the locations of Small evolved Nodes (SeNBs) vary. Simulation results show that the average throughput and cell edge throughput can be greatly improved when small cells are properly deployed with the certain deployment radius and angle. Meanwhile, how to optimally configure the parameters to achieve the potential of the deployment is discussed when applying different ICIC techniques.

• Transactions on Electrical and Electronic Materials
• /
• 제16권3호
• /
• pp.146-150
• /
• 2015

Insulation breakdown voltage and insulation lifetime were investigated in straight lines or twisted pairs with polyesterimide-polyamideimide enameled round wires (EI/AIW ). The enamel thickness was 50 μm and the conducting copper radius was 0.50, 0.75, 1.09, and 1.50 mm, respectively. There were many air gaps in a twisted pair therefore, when voltage was applied to the twisted pair, enamel erosion took place in the air gap area because of partial discharge according to Paschen's law. Insulation breakdown voltage and insulation lifetime were highest in the sample of 0.75 mm conductor radius, which was higher than those values for 0.50 mm or 1.09 and 1.55 mm.

• 한국통신학회논문지
• /
• 제30권6A호
• /
• pp.499-509
• /
• 2005

위성 DMB (Digital Multimedia Broadcasting) 시스템은 도심 환경에서 위성으로부터의 감쇄된 신호를 증폭하기 위하여 별도의 수신신호 증폭을 위한 지상 중계기(Gap-filler)를 필요로 한다. 따라서 Gap-filler를 통해 증폭된 신호는 위성으로부터 직접 수신된 신호에 비하여 위성 DMB 시스템 간에 보다 더 큰 간섭을 야기한다. Gap-filler를 통해 발생된 위성 DMB 시스템 간의 간섭에 의해 위성 DMB 시스템의 Outage Capacity가 제한될 수 있기 때문에, 위성 DMB 시스템 간의 상호간섭 효과를 최소화 하여야 각 시스템의 기대 Outage Capacity를 얻을 수 있다. 본 논문에서는 ITU-R BO. 1130-4를 토대로, 보다 정확한 파라미터를 사용한 시스템 레벨 시뮬레이션을 통해 위성 DMB 시스템간의 상호간섭을 분석하고, 각 시스템의 Gap-filer에서 설정한 Spectrum Mask를 이용하여 간섭을 최소화하고 Outage Capacity를 극대화하기 위한 Gap-filler를 이용하는 위성 DMB 시스템간의 보호대역 및 적정 셀 반경을 제안한다.

• 한국통신학회논문지
• /
• 제25권4A호
• /
• pp.481-488
• /
• 2000

The demands for mobile communication service are growing rapidly. In heavily populated areas, cell split is unavoidable to increase the capacity of the cellular system. Cell splitting makes a cellular system to have mixed cell sizes. For cell planning, it is necessary to analyze the reverse link capacity of a CDMA cellular system with mixed cell sizes. In this paper, we propose a method to calculate the reverse link capacity of a CDMA cellular system with mixed cell sizes. When a macro cell is split into three micro cells, as an example, we calculate the reverse link capacities for the three micro cells and the neighboring macro cells. The results show that as the radius of a micro cell decreases, the reverse link capacity of the micro cell increases, while those of the neighboring macro cells decrease.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2008년도 춘계학술발표대회 논문집
• /
• pp.46-49
• /
• 2008

This research does Complexity form, Interior epidermis cell re-organization, Object discovery that have correct numerical value concept by purpose. Research applied by Grid re-organization in form generation, Parameter variation of cell unit (morphor, tweener), Symbol, pattern of variation, self-organization cell substitution order. Representation through 3d digital modeler of polygon, Nurbs and street-sheet program(x,y,z coordinates & Network way of points) etc. of main work. Investigator specified numbers of U profiles*30, V point-20 that is 600 Paramaters individual in volume, and define circle radius of lighting in object, Projection size variously and tried difference. Transposition cell to point and Heightened brightness of color using pointillism of painting. Led lighting cell object is expressed being decoded by digital code.