• 한국주조공학회지
• /
• 제29권1호
• /
• pp.33-37
• /
• 2009

Cartesian grid system has mainly been used in the casting simulation even though it does not nicely represent sloped and curved surfaces. These distorted boundaries cause several problems. A special treatment is necessary to clear these problems. In this paper, we propose a new method that can consider the cutting cells which are cut by casting and mold based on the partial cell treatment (PCT). This method provides a better representation of geometry surface and will be used in the computation of velocities that are defined on the cell boundaries in the Cartesian grid system. Various test examples for several casting process were computed and validated. The analysis results of more accurate fluid flow pattern and less momentum loss owing to the stepped boundaries in the Cartesian grid system were confirmed. By using the cut cell method, performance of computation gets better because of reducing the whole number of meshes.

• 한국수소및신에너지학회논문집
• /
• 제18권4호
• /
• pp.422-431
• /
• 2007

Polymer electrolyte membrane fuel cell(PEMFC) is very interesting power source due to high power density, simple construction and operation at low temperature. But it has problems such as high cost, improvement of performance and effect of temperature. These problems can be approached to be solved by using mathematical models which are useful tools for analysis and optimization of fuel cell performance and for heat and water management. In this paper, the present work is to develop an electrochemical model to examine the electrochemical process inside PEM fuel cell. A complete set of considerations of mass, momentum, species and charge is developed and solved numerically with proper account of electrochemical kinetics. When depth of gas channel becomes thinner, diffusion of reactant makes well into gas diffusion layer(GDL) and the performance increases. Although at low current region there is little voltage difference between experimental data of PEM fuel cell and numerical data. When the porosity size of gas diffusion layer for PEM fuel cell is bigger, oxygen diffusion occurs well and oxygen mass fraction appears high in catalyst layer.

• 한국수소및신에너지학회논문집
• /
• 제19권3호
• /
• pp.232-238
• /
• 2008

Research has been proceeded on fuel cell which is fueled by hydrogen. Polymer electrolyte membrane fuel cell (PEMFC) is promising power source due to high power density, simple construction and operation at low temperature. But it has problems such as high cost, temperature dependent performance. These problems could be solved by experiment which is useful for analysis and optimization of fuel cell performance and heat management. In this paper, when hydrogen flows constantly at the stoichiometry of ${\xi}=1.6$, the performance of the fuel cell stack was increased and the voltage difference between each cells was decreased according to the increase of air stoichiometry by 2.0, 2.5, 3.0. Therefore, the control of air flow rate in the same gas channel is important to get higher performance. Purpose of this research is to expect operation temperature, flow rate, performance and mass transportation through experiment and to help actual manufacture of PEM fuel cell stack.

• 한국과학교육학회지
• /
• 제7권1호
• /
• pp.1-17
• /
• 1987

The rectnt studies on the learning of the scientific concepts have suggested that most students have misconceptions related to the contents to be learned and that those misconceptions exert their influences on the subsequent learning of the content Those facts necessitate the identification of the misconceptions before the instructions and the preparation of the instructional materials based on those misconceptions identified. Several studies also revealed that such biological areas as cell division, reproduction and fertilization were ranked among the most difficult areas for high school students to learn. Therefore, this study had its triple objectives as follows: (1) Identification of misconceptions in such areas as cell division, reproduction and fertilization. (2) Investigation of the current high school biology textbook I's as the sources of those misconceptions. (3) Development of teaching materials based on the misconceptions identified and the problems in the textbooks analyzed. This study identified several misconceptions held by high school students of biological concepts related to the conceptual areas of life-continuity, and found the problems in learning of the high school biology textbooks. Based on the misconceptions and the problems, a teaching/learning model and its content material were developed at the final course of this study.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1994년도 춘계공동학술대회논문집; 창원대학교; 08월 09일 Apr. 1994
• /
• pp.236-243
• /
• 1994

In this paper we consider the part-machine cell formation decision of the generalized Group Technology(GT) problem in which multiple process routes can be generated for each part. The existing p-median model and similarity coefficient algorithm can solve only small-sized or well-structured cases. We suggest an assignment method for the cell formation problem. This method uses an assignment model which is a simple linear programming. Numerical examples show that our assignment method provides good separable cells formation even for large-sized and ill-structured problems.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.515-516
• /
• 2008

We studied about new module technology to solve warpage problems that produce bending of cell in the LCD (Liquid crystal display). Characteristics of cell gap and glass bending of applying heat Panel's PAD part and cell at various temperature was investigated. When applies heat and compresses PAD party only in case of compressing COG(Chip on Glass), uniformity of cell gap that happen by glass bending by temperature of these compressing COG in the PAD party is decreased.

• 한국경영과학회지
• /
• 제17권2호
• /
• pp.25-33
• /
• 1992

Manufacturing cell formation is one of the most important problems faced in designing cellular manufacturing systems. The purpose of this study is to design effective manufacturing cell systems by developing a method which forms machines/parts into optimal machine cells/part families. The 0-1 data matrix structure is used to form a basis for manufacturing cell formation. In this paper, we propose a CE method to reorder the 0-1 data matrix for manufacturing cell formation. The resulting solutions are shown to demonstrate the effectiveness of the CE method.

• 대한기계학회논문집A
• /
• 제31권3호
• /
• pp.388-394
• /
• 2007

Many engineering problems require the calculation of effective material properties of a structure which is composed of repeated micro-structures. The homogenization method has been used to calculate the effective (homogenized) properties of composites and several homogenization procedures for different physical fields have been introduced. This research describes the modified homogenization technique for magnetostatic problems. Assuming that the material is periodically repeated, its effective permeability can be prescribed by calculating the homogenized magnetic reluctivity using the finite element analysis of the micro unit cell. Validity of the suggested method is confirmed by comparing the results by the energy based method as well as the widely known homogenization method.

• 한국통신학회논문지
• /
• 제21권5호
• /
• pp.1317-1324
• /
• 1996

An angular spectral inverse technique, applying the moment method procedure with a series expansion for the induced field in each enlarged cell, is suggested to reconstruct permittivity profiles of inhomogeneous dielectric objects and to reduce the ill-posedness inherent to inverse scattering problems. The angular spectral inverse scattering using the pulse basis function in enlarging the scatterer has the ill-posedness due to the input data of higher spectra. To reduce the number of higher spectra, enlarging the cell size and averaging over the cell with a suitable weighting function are found to play improtant roles for the reduction of ill-posedness of the angular spectral inverse scattering problems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1258-1260
• /
• 1997

The metallic interconnector has a superior property than the ceramic interconnector in the point of the cell performance, but has problems to form oxide films on the interconnector surface during cell operation and induce cracking in the cell due to the stress by the thermal expansion coefficient difference with stabilized Zr electrolyte. For solving the problems in the metallic interconnector, new and modified materials have been investigated. In this paper, $LaCrO_3$ dispersed Cr was evaluated in high temperature oxidized characteristics, sintering density, electrical conductivity and various thermochemical properties. The test results show that $LaCrO_3$ dispersed Cr has more superior properties than that of conventional alloy interconnector and $LaCrO_3$ dispersed Cr can be used as an interconnector in SOFC.