• 산업공학
• /
• 제19권2호
• /
• pp.168-173
• /
• 2006

In the Reporting Cell Location Management (RCLM) system, a subset of cells in the network is designated as the reporting cells. Each mobile terminal performs location update only when it enters one of these reporting cells. When a call arrives, the paging is confined to the reporting cell the user last reported and the neighboring bounded non-reporting cells. Frequent location update may result in degradation of quality of service due to interference. Miss on the location of a mobile terminal will necessitate a search operation on the network when a call comes in. We must decide the number of reporting cells and which cell should be reporting cell to balance the registration (location update) and search (paging) operations to minimize the cost of RCLM system. This paper proposes a ranking ant colony system (RACS) for optimization of RCLM system.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.270-273
• /
• 2011

Water management is important in proton exchange membrane fuel cell because the water balance has a significant impact on the overall fuel cell system performance. In fuel cell vehicle, the vehicle's power demand is dynamic; therefore, the dynamic water management system is required. This present study proposes a method to control the humidity of the input air in cathode side of the fuel cell vehicle. The simulation using several driving cycles shows the proposed air humidification control obtains a relatively good result. The liquid saturation level is seen constant at the target level although still there are small deviations at driving cycles which having averagely high power demands.

• 한국통신학회논문지
• /
• 제34권6A호
• /
• pp.445-457
• /
• 2009

본 논문은 펨토셀이 도입된 IEEE 802.16e 시스템에서 효율적인 핸드오버를 위한 이웃 기지국 관리 기법을 제안하고 컴퓨터 모의 실험을 통해 성능을 평가한다. 제안하는 방식에서는 두 가지 기법을 사용하여 단말이 핸드오버를 위해 스캐닝 해야 하는 펨토셀의 수를 줄이고 이를 통해 빠르고 효율적인 핸드오버를 가능하도록 한다. 첫 번째 기법에서 매크로 기지국은 매크로셀을 다수의 구역으로 나누고 각 구역에 속한 펨토셀 정보를 구분하여 방송한다. 이를 수신한 단발은 자신이 속한 구역의 펨토셀만을 대상으로 스캐닝을 수행함으로써 핸드오버 소모 시간 및 전력을 줄일 수 있다. 두 번째 기법에서는 각 펨토셀이 자신으로부터 일정한 거리 내에 존재하는 주변 펨토셀들의 핸드오버 관련 정보를 직접 수집하고 방송함으로써 단말이 스캐닝할 펨토셀의 수를 줄일 수 있다. 컴퓨터 모의 실험 결과는 스캐닝 시 소모 시간 및 사용 전력, 그리고 스캐닝 효율 측면에서 제안한 방식이 기존 방식에 비해 상당한 성능개선이 있음을 보여준다.

• 한국수소및신에너지학회논문집
• /
• 제23권4호
• /
• pp.323-329
• /
• 2012

A thermal management system of a proton exchange membrane fuel cell is taken charge of controlling the temperature of fuel cell stack by rejection of electrochemically reacted heat. Two major components of thermal management system are heat exchanger and pump which determines required amount of heat. Since the performance and durability of PEMFC system is sensitive to the operating temperature and temperature distribution inside the stack, it is necessary to control the thermal management system properly under guidance of operating strategy. The control study of the thermal management system is able to be boosted up with hardware in the loop simulation which directly connects the plant simulation with real hardware components. In this study, the plant simulation of fuel cell stack has been developed and the simulation model is connected with virtual data acquisition system. And HIL simulator has been developed to control the coolant supply system for the study of PEMFC thermal management system. The virtual data acquisition system and the HIL simulator are developed under LabVIEWTM Platform and the Simulation interface toolkit integrates the fuel cell plant simulator with the virtual DAQ display and HIL simulator.

• 한국정보통신학회논문지
• /
• 제19권4호
• /
• pp.794-799
• /
• 2015

인도어 무선 통신 시스템에서 셀 아웃티지를 효율적으로 관리하기 위하여, 갑작스런 네트워크 결함을 신속하게 해결해야 한다. 본 논문에서는, 사용자들에게 끊김없는 서비스 제공을 위하여 근접-최적 셀 아웃티지 관리 (NoCOM: Near-Optimal Cell Outage Management) 기법을 제안한다. 시스템 용량, 사용자 공평성, 사용자 서비스 품질 보장 등을 동시에 고려하여, 제안 기법에서는 non-convex 최적화 문제를 기반으로 근접-최적 서브채널과 파워 해를 찾아 이를 사용자에게 반복적으로 할당한다. 시뮬레이션을 통하여 평균 셀 용량, 사용자 공평성, 계산 복잡도 관점에서 제안하는 기법의 우수성을 증명한다.

• 한국수소및신에너지학회논문집
• /
• 제15권1호
• /
• pp.1-11
• /
• 2004

Hybrid power systems with fuel cells and batteries have the potential to improve the operation efficiency and dynamic response. A proper load management strategy is important to better system efficiency and endurance in hybrid systems. In this paper, a fuzzy logic algorithm has been used to determine the fuel cell output power depending on the external required power and the battery state of charge(SoC). If the required power of the hybrid system is small and the SoC is small, then the greater part of the fuel cell power is used to charge the battery pack. If the required power is relatively big and the SoC is big, then fuel cell and battery are concurrently used to supply the required power. These IF-THEN operation rules are implemented by fuzzy logic for the energy management system of hybrid system. The strategy is evaluated by simulation. The results show that fuzzy logic can be effectively used to optimize the operational efficiency of hybrid system and to maintain the battery SoC properly.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.1071-1072
• /
• 2012

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1994년도 춘계공동학술대회논문집; 창원대학교; 08월 09일 Apr. 1994
• /
• pp.236-243
• /
• 1994

In this paper we consider the part-machine cell formation decision of the generalized Group Technology(GT) problem in which multiple process routes can be generated for each part. The existing p-median model and similarity coefficient algorithm can solve only small-sized or well-structured cases. We suggest an assignment method for the cell formation problem. This method uses an assignment model which is a simple linear programming. Numerical examples show that our assignment method provides good separable cells formation even for large-sized and ill-structured problems.

• 한국경영과학회지
• /
• 제26권2호
• /
• pp.1-11
• /
• 2001

This paper considers the scheduling of cell-based handoffs to balance the traffic in a fiber-optic microcelluar system. In the system depending on the order of cell based handoff, periodical balancing of the traffic among microcells can be achieved. The cell based handoff problem is formulated as a dynamic programming and the computational complexity is analyzed. Since the scheduling problem requires real time solution, heuristic algorithms are proposed and the computational results are discussed.

• 한국경영과학회지
• /
• 제18권3호
• /
• pp.159-177
• /
• 1993

One of major research issues in cellular manufacturing is studing factors that are fovorable or detrimental to the conversion of traditional functional layouts to GT cellular layouts. Among many factors, this paper explored plausible relationships between the scope of plant conversion and the manufacturing cell design processes and outcomes. The cell design practices of 28 U. S. plants were surveyed through a mail questionaire. While most relationships were not statistically significant, some interesting findings and insights could be drawn. With this researhc, we can better understand a part of relationships between the company's conversion strategy and the cell design strategies and outcomes.