• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.269-274
• /
• 2004

The aims of this study were to Investigate the floor impact noise isolation performance of floating floor with isolation materials and propose the improvement direction of floor impact noise measurement method and evaluation classes using impact ball. Reduction of light-weight impact sound pressure level can be achieved by the finishing materials, such as vinyl finishing material and wooden flooring with isolation materials. Floor impact noise Isolation material which satisfy the properties of the floor impact noise isolation materials cause resonance in the low frequency band and worsen heavy-weight impact sound pressure level. Heavy-weight impact sound level can be reduced by using noise reduction flooring, ceiling and increase of slab thickness. Strong impact force in low frequency bang below 63Hz of bang machine is not similar to human impact source and causes some problem in evaluating heavy-weight impact noise but heavy-weight impact noise measurement and evolution using impact ball which is very similar to human impact is more reliable than bang machine. Correction value on the background noise and sensitivity of residents should be considered on the floor impact noise evaluation classes.

• 한국정보통신학회논문지
• /
• 제26권3호
• /
• pp.449-455
• /
• 2022

본 논문에서는 발광 다이오드(LED)의 조도를 기반으로 삼각측량법을 사용한 위치 계측 시스템을 제안한다. 세 개의 LED는 가상공간의 천장에 위치하고 각각의 고정 좌표는 모니터링 프로그램에 입력하여, 조도 값과 길이의 관계식을 통해 각각 LED로부터 조도 센서까지의 길이를 도출하였다. 도출된 길이를 바탕으로 삼각측량법을 사용해 가상공간의 물체 위치 정보를 검출하였다. 삼각측량법으로 도출된 길이의 오차를 최소화하기 위해 최소자승식을 이용하여 오차를 최대한으로 줄였다. 기존의 가시광통신(VLC)을 이용한 실내 위치 측정시스템과는 달리, 제안된 시스템은 송신기와 수신기 사이의 동기화가 필요치 않으므로 시스템을 간결하게 구성할 수 있다.

• Journal of Biosystems Engineering
• /
• 제32권1호
• /
• pp.13-19
• /
• 2007

Storage rough rice in low temperature using the winter cold air avoids rough rice temperature increase which happens from early May, and this is possible by installing a cooling system in the top of a bin, the room between top rice level and bin ceiling. The research objective is to establish low temperature rough rice storage technique, furnishing winter cold air to rough rice, by investigating the cooling system potential of maintaining low rough rice temperature and by analyzing rough rice storage characteristics over a storage period. The rough rice storage characteristics were evaluated from January to August 2003, using a storage and dry bin of 400-ton capacity. Results of this research are as follows: Cooling bin using the cooling system in the top of the bin maintained the rice temperature less than 15$^{\circ}C$ in entire portions in August. Moisture contents and germination rates of rough rice were decreased over the storage period, on the other hand, the rough rice stored in the ambient temperature bin had relatively lower moisture contents and germination rates to compare with the bin using winter cold air. Crack ratio and acid value of brown rice in the ambient temperature bin storage had increased more than the cooling bin storage. The result indicates that the storage bin using winter cold air and the cooling system maintains moisture content and germination of rice, minimizes cracked kernel and acid value, and preserves rice quality as well.

• 한국산학기술학회논문지
• /
• 제14권5호
• /
• pp.2497-2504
• /
• 2013

본 연구는 1975년 서울시 교육위원회에서 발간한 '학교시설 표준설계도'가 중학교 대상 표준도의 초기 사례임에 주목하여 그 계획특성을 살펴보았다. 연구결과를 정리하면 다음과 같다. 첫 째, 평면계획에서는 편복도형 블록플랜이 전형적으로 적용된 가운데 유형별로 복도를 없앤 평면형, 일조조건 개선을 위한 $9.9{\times}6.6m$ 교실 모듈, 수납공간의 적극적 계획 등의 변화도 보인다. 둘 째, 일체의 의장이 배제된, 채광면적의 확보를 우선으로 하는 기능적인 입면계획이 적용되었다. 셋 째, 층고, 천정고, 창틀의 설치 위치 등에서 규준화된 단면 치수들이 적용되었으며 노출 천정 구조, 단열구조의 미비, 초기 유형의 목재 바닥틀 혼용 등과 같은 철근 콘크리트조 교사의 과도기적 특성이 보인다. 넷 째, 체육관 계획에서는 다양한 입면구성과 매스의 조형적 처리로 교사동과 대비되는, 학교건축의 상징성을 표출하고자 하는 의도가 나타난다. 다섯 째, 교사동과 이격 배치를 전제로 하는 화장실과 관리실 등의 별동형 계획에서도 동시대 학교건축으로 전환해 가는 과도기적 특성을 발견할 수 있다. 이와 같은 특성들은 표준도에 의한 과거 학교건축의 전형을 보여주면서도 동시에 당시 학교건축에서 요구되는 조건들에 대한 대응 방식과 변화 과정을 파악할 수 있게 한다. 이는 '75년 서울시 표준도'가 가지는 교육시설사 연구 사료로서의 주요한 가치라고 할 수 있다.

• 한국산업융합학회 논문집
• /
• 제21권3호
• /
• pp.141-147
• /
• 2018

In a time when product development cycles are getting shorter and shorter, many companies are making efforts to develop products with high reliability in a short period of time, accelerated life test is widely used as a method to quickly evaluate reliability. Accelerated life test reduces the test life or the life of the product from the observed data by shortening the lifetime of the product or abruptly lowering the performance under the worse condition than the actual condition in order to shorten the test cost or the test time. In this paper, BL3640A-06P+RB35, DC12V model, which is used in the support device of an automatic rotation type digital signage, which display various information such as textures and images on a display screen in a public place or a commercial space, BLDC motors were subjected to a constant stress test and at the rotational speed of 1rpm, $180^{\circ}$ rotation and reverse rotation under actual use conditions, the stress was imposed on the rotating speed of 2rpm and the weight of the actual installed product from 22.2kgf to 10kgf were installed. The lifetime of the actual use environment condition is 23,545 hours and the rotation speed is accelerated. The life time of the acceleration condition with the additional weight is 1,380 hours. The acceleration factor is calculated as 17.06, the one year guarantee test day is 235 days to 14 days, of the period from 470 days to 28 days, and the third year from 704 days to 42 days. The test date of the BLDC motor was tested on the shortened test date, and the rotational speed and the current value were measured. It is found that there is no defect even if it operates as the test date corresponding to the specified one year warranty period and the 3 year accelerated life test which is experimented. Using the statistical technique of the regression analysis the expected time for the motor to defect to #4 samples was 20 years.

• 한국산업보건학회지
• /
• 제32권4호
• /
• pp.381-392
• /
• 2022

Objectives: Objective of this study is to review briefly exposure characteristics, monitoring instruments and threshold limit values for extremely low frequency-magnetic field (ELF-MF) methods. This study was undertaken through brief literature review. We performed a literature search in PubMed to identify ELF-MF studies conducted in workplaces. Initial search keywords such as 'extremely low frequency-magnetic field (ELF-MF)' and 'electromagnetic fields (EMF)' combined or singly. We limited our review to occupational rather than general nonworkplace environmental exposures. Methods: The contents we reviewed: key industry and occupations generating ELF-MF, several direct-reading instruments monitoring ELF-MF and threshold limit values (TLV) preventing health effects may be caused by the exposure to ELF-MF. Results: The industries related to the generation and supply of electricity, electrolytic installations, welding, and induction heating and more were regarded as high ELF-MF exposure industries. All jobs handling or employed performed in power cable lines, electrical wiring, and electrical equipment are found to be exposed to ELF-MF. Threshold or ceiling limit, 1,000 µT, is established to prevent acute effects of exposure to low-frequency EMFs on the nervous system: the direct stimulation of nerve and muscle tissues and the induction of retinal phosphenes. The International Agency for Research on Cancer (IARC) has classified ELF-MF as possibly carcinogenic to humans chiefly based on epidemiological studies on childhood leukemia. However, a causal relationship between magnetic fields and several types of cancer including childhood leukemia has not been established nor has any other long-term effects. Risk management using precautionary measures, has been initiated by the US and EU to prevent chronic health effects related to ELF-MF exposure in workplaces. Conclusion: This study recommends the implementation of various measures such as theestablishment of occupational exposure limit values for ELF-MF and precautionary principle to prevent potential chronic occupational health effects may be caused by ELF-MF in Korea.

• 한국산업보건학회지
• /
• 제32권1호
• /
• pp.10-20
• /
• 2022

Objectives: The aim of this study is to evaluate exposure levels of the extremely low frequency magnetic fields(ELF-MF) radiated from various electric facilities in Liquid Crystal Display(LCD) manufacturing processes. Methods: This study measured the exposure levels of personal and local ELF-MF for the electronic facilities installed in two LCD manufacturing companies. Samplers were installed around workers' waist during working hours to identify personal exposure levels, and direct reading equipment were located at 3 cm, 10 cm, and 30 cm away from the surface of the electronic facilities to measure local exposure levels. Average and maximum(ceiling) values were calculated for personal and local exposure levels. Results: Average and maximum of personal exposure levels for each worker were 0.56(mean) ± 0.02(SE) µT and 6.31 ± 0.75 µT, respectively. Statistical analyses of the study found that maximum of the personal exposure levels for engineers was significantly higher than that for operators since engineers spend more time near the electronic facilities for repairing. The range of maximum personal exposure levels was 0.50 ~ 43.50 µT and its highest level was equivalent to 4.35 % of ACGIH(American Conference of Governmental Industrial Hygienists) exposure limit value(1 mT). Maximum of local exposure levels was 8.18 ± 0.52 µT and the electronic facilities with higher exposure levels were roof rail and electric panel, which were not related to direct manufacturing. The range of maximum local exposure levels was 0.60 ~ 287.20 µT and its highest level was equivalent to 28.7 % of the ACGIH exposure limit value. Lastly, the local exposure levels significantly decreased as the measurement distance from the electronic facilities increased. Conclusions: Maximum of personal and local exposure levels did not exceed the exposure limit value of ACGIH. However, it is recommended to keep the workers as far as possible from the sources of ELF-MF.

• 디지털융복합연구
• /
• 제11권12호
• /
• pp.685-696
• /
• 2013

본 연구는 우리나라 교육계열 전공 여성 박사의 학교와 직장의 진로성취과정에서 겪는 진로개발 및 진로장애를 탐색하는데 그 목적이 있다. 연구의 목적을 수행하기 위하여 최근 5년 이내의 교육계열 전공 여성 박사 42명을 대상으로 질적 연구를 진행하였다. 그 결과 교육계열 여성 박사들은 교수와의 학술활동을 통해서 자신의 진로개발에 영향을 가장 많이 받고 있었으며 둘째, 직장 내에서 유리창효과를 경험한 것으로 나타났다. 셋째, 결혼이라는 것이 기혼 및 미혼 여성 박사 모두 진로개발 시 장애요인이라고 인식했다. 기혼은 자신의 가정과 육아에 대한 책임감과 미혼은 유교적 가치관 속에서 사회적 약자로 인식하고 있었다. 이러한 다양한 경험들은 여성 박사들에게 진로개발을 저해하는 요인으로 나타났지만 주변인의 지지와 자신의 자아실현에 대한 강한 목표의식은 진로장벽을 타계하는 방편으로 나타났다. 본 연구는 여성 박사의 진로개발에는 다양한 관점에서의 맥락이 여성의 진로개발에 영향을 주는 것으로 발견되었다. 여성 박사를 위한 진로지도는 학생들의 요구와 사회 변화에 따라 유동적이고 다각적인 방향에서 접근 하는 것이 필요하다.

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.242-246
• /
• 2017

In this study, it was investigated about optical simulation in high brightness and high uniformity general lighting using glass light guide plate. And we adopt edge-light emission type light plate. Edge-light type lighting has been used LCD application, especially note PC or smart phone backlight unit. Because it had the good properties such as slim shape and light weight. We thought this type was suitable for general lighting application such as wall attached type or ceiling mount type. But many of edge-light type lighting had problems. It called slanted output light rays. That was main key parameter how could control the direction of output light rays. We investigated the solution of this problems, using ray tracing method, we recognized the major fact of the solution relied on the geometric structure of diffusing dot shape. We set the conditions of aspect ratio in diffusing dot shape such as 0.5 to 1. And, at first, we designed diffusing dots shape based on the results of optical simulation and made specimen. as above condition, and acquired good result in confirming dots shape such as the value of the output rays's peak angle was around 75 degrees. And good light distribution characteristics were measured by slated spectro-radiometer. It was shown that the effective ways of designing light distribution characteristics using optical simulation such as ray tracing linear method for making general lighting using glass light guide plate.

• 한국산업보건학회지
• /
• 제18권1호
• /
• pp.32-40
• /
• 2008

Methyl bromide has been used as a representative fumigant for quarantine, and several poisoning cases have occurred recently by this chemical in Korea. The purpose of this study is to evaluate workers' exposures to airborne methyl bromide in the importing and exporting plant products quarantine companies. Air samples were collected 400/200 mg Anasorb 747TM and were analyzed by gas chromatograph /flame ionization detector according to the Occupational Safety and Health Agency (OSHA) Method PV2040. Geometric mean (GM) and arithmetic mean (AM) of total 27 workers' exposure concentrations to airborne methyl bromide were 1.12 ppm and 0.24 ppm, respectively. Two exposures(12.1 ppm and 12 ppm as 8hr-TWA) of total 27 workers' exposures exceeded the Korean standard (5 ppm) of Ministry Labor, while 4 exposures (15%) exceeded the Threshold Limit Value (TLV) (1 ppm) of American Conference of Governmental Industrial Hygienists (ACGIH). Seven samples (11%) of total 63 short-term air samples exceeded the OSHA Permissible Exposure Limit (PEL) 20 ppm (Ceiling). The opening (management) task in wood fumigation by tent showed the highest short-term exposure concentrations (AM: 18.6 ppm, GM: 0.58 ppm, maximum: 340.7 ppm). The maximum level in treatment task of the same process was 2.01 ppm. Methyl bromide concentrations in opening operation was significantly higher than that in treatment operation (p<0.05). In conclusion, the GM of workers' 8hr-TWA exposures to airborne methyl chloride in the importing/exporting plant quarantine industry was estimated below the ACGIH TLV (1 ppm). However, opening task in the fumigation of wood being covered with tent or fumigation of pant products in container showed the levels exceeding ACGIH TLV (1 ppm), and opening task in the fumigation of wood being covered with tent showed the level exceeding the Korean standard of Ministry of Labor (5 ppm).