• Journal of Chest Surgery
• /
• v.12 no.4
• /
• pp.429-433
• /
• 1979

Morgagni hernia is a rare condition of the congenital diaphragmatic hernia which Is located at the anteromedial portion of the diaphragm, and is located immediately posterior to the sternum. Its cause is considered by embryologic defect and the abdominal organs are passed through a defect. The incidence is predirected women over 50 years old. Its synonym is hernia of subcostosternal, retrosternal, parasternal, rectocostoxiphoid, anterior diaphragmatic or Larrey`s. This report presents a symptomatic Morgagni hernia of ten months old male child on whom the diagnosis was established and was operated at the Busan Gospel Hospital. This patient was admitted with the chief complaints of mild cyanosis, frequent upper respiratory infections and protrusion of the right lower anterior chest. Herniorrhaphy was performed through the upper abdominal midline incision, hernial contents of the omentum and the colon, and sac as noticed from the Larrey`s space measuring 4 x 2 cm. in diameter and oval in shape. Interrupted sutures without difficulty repaired the defect. The cyanosis was disappeared and the patient had uneventful course of post-operative period. The patient was discharged at 7th. postoperative day. This case presentation with a brief review of literatures is given.

• Journal of Chest Surgery
• /
• v.13 no.1
• /
• pp.34-40
• /
• 1980

Total 193 patients over 16 years of age who have underwent a surgical correction of congenital heart diseases during the period 1964 to September of 1979 were reviewed. 106 patients were male and 87 patients were female. 85 patients were in the ages of 16 years through 20 years. The oldest patient was 54 years old male who had atrial septal defect. The commonest defects were atrial septal defect that accounted for 66 cases [34.2%]. Ventricular septal defect was next one that accounted for 66 cases [34.2%]. Patients with tetralogy of Fallot defects were 34 cases [17.6%]. 25 cases had patent ductus arteriosus [13.0%]. Patients with pulmonary stenosis were 17 cases [8.8%] and transposition of the great arteries cases were 2 cases [1%]. There were 14 cases of operative death in this series. So operative mortality rate was 7.3%. The commonest cause of death was low output syndrome and next was renal failure. This reviewed series reveals the incidence of operable congenital heart defects appearing in adult cardiac surgical patients and an aggressive surgical approach can be justified with low operative mortality like as pediatric age group.

• Journal of Chest Surgery
• /
• v.23 no.6
• /
• pp.1263-1269
• /
• 1990

Two patients with uncorrectable cyanotic cardiac anomalies underwent total cavopulmonary shunt[modified Fontan operation]. Case I was a 14 years old male with dyspnea and cyanosis after birth. Aortogram showed TGA combined with overriding of aorta, pulmonary stenosis, complete atrioventricular septal defect, interruption of inferior vena cava, and situs inversus totalis. We had performed total cavopulmonary shunt using with 16 mm Gortex Graft in single atrium to bypass the hepatic vein to pulmonary artery. Postoperatively, patient sustained low PaCO2 and low cardiac output and then expired at 19th postoperative day. The cause of death of the patient would be low cardiac output. Case II was a 6 years old female with dyspnea and cyanosis after birth. Aortogram showed tricuspid atresia[Type IIb], transposition of great arteries, atrial septal defect, ventricular septal defect and pulmonary stenosis, We had performed total cavo-pulmonary shunt using intraatrial baffle[tunnel] with Goretex patch. The postoperative course of this patient was good without event.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2010.05a
• /
• pp.135-138
• /
• 2010

In the construction industry, construction management system using information technology has been applied diversely to increase productivity. Although IT device such as PDA, RFID, Barcode, wireless network and web camera has been introduced in construction site, the usage of these device is restricted, because these cause engineer to do additional work. The suggested process using Digital Pen in this study, which can lessen engineer's additional work, get defect data promptly. Also accumulated data is utilized effectively for analyzing construction site. The purpose of this study is to introduce Digital Pen System as a means of construction data acquisition for improving productivity.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.2
• /
• pp.143-151
• /
• 2007

One of the treatment methods for maxillary cancers or infections in maxilla is maxillectomy. Palatal defect can be resulted from this operation and it may cause functional problems with swallowing and speech, and psychological problems of patients. After maxillectomy, as rehabilitation, there can be two options. One is a prosthodontic treatment using obturator and the other is surgical reconstruction of defect with graft. As both methods have advantages and disadvantages, in determining treatment method after maxillectomy, various factors have to be considered. The purpose of this study is to compare the prosthodontic group to surgical group after maxillectomy with elapsed days prior to commencement of postoperative oral feeding, and to analyze the results of prosthodontic treatment and surgical treatment. During the period from March of 2000 to June of 2006, 74 patients were treatment by prosthodontic methods for maxillary defect. Among these patients, patients who had only velopharyngeal deficiency after surgery, whose data were incomplete, whose causes of palatal defect were not the treatment of diseases in maxilla, and who already had palatal defect due to previous surgery were excluded in this study. The patients who underwent maxillectomy for the treatment of diseases in the maxilla and were treated immediately after operation using surgical reconstruction or prosthodontic rehabilitation were included in this study. The records of 43 patients were reviewed to compare and to analyze the prosthodontic treatment and surgical reconstruction after maxillectomy. The median of days elapsed prior to commencement of postoperative oral feeding in the prosthodontic group was compared with data of surgical group. The data was analyzed using the Mann-Whitney test (${\alpha}$=.05). Days elapsed prior to postoperative oral feeding commencement in the prosthodontic group were less than those in the surgical group.

• Archives of Reconstructive Microsurgery
• /
• v.20 no.1
• /
• pp.8-13
• /
• 2011

Purpose: A palatal defect following maxillectomy can cause multiple problems like the rhinolalia, leakage of foods into the nasal cavity, and hypernasality. Use of a prosthetic is the preferred method for obturating a palate defect, but for rehabilitating palatal function, prosthetics have many shortcomings. In a small defect, local flap is a useful method, however, the size of flap which can be elevated is limited. In 12 cases of palatomaxillary defect, we used various microvascular free flaps in reconstructing the palate and obtained good functional results. Method: Between 1990 and 2004, 12 patients underwent free flap operation after head and neck cancer ablation, and were reviewed retrospectively. Among the 12 free flaps, 6 were latissimus dorsi myocutaneous flaps, 3 rectus abdominis myocutaneous flaps, and 3 radial forearm flaps. Result: All microvascular flap surgery was successful. Mean follow up time was 8 months and after the follow up time all patients reported satisfactory speech and swallowing. Wound dehiscence was observed in 4 cases, ptosis was in 1 case and fistula was in 1 case, however, rhinolalia, leakage of food, or swallowing difficultly was not reported in the 12 cases. Conclusion: We used various microvascular flaps for palatomaxillary reconstruction. For 3-dimensional flap needs, we used the latissimus dorsi myocutaneous flap to obtain enough volume for filling the defect. Two-dimensional flaps were designed with latissimus dorsi myocutaneous flap, rectus abdominis flap and radial forearm flap. For cases with palatal defect only, we used the radial forearm flap. In palatomaxillary reconstruction, we can choose various free flap techniques according to the number of skin paddles and flap volume needed.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.3 s.25
• /
• pp.128-134
• /
• 2005

Up to now, the various water proofing methods and materials have been developed. For the water proofing methods, poly-urethane membrane method is one of the commonly used and increase market share in water proofing industry due to it's many advantages. However, in spite of it's many advantages over other water proofing methods, water proofing defect occurs frequently. With this respect, the study investigate water proofing defect causes in roof water proofing. The study investigate 13 water proofing construction site in Sunchon city in oder to find urethane membrane defection causes and their type. As a results of the study, the followings are founded. 1) Among various water proofing defection causes, problems of water remain phenomenon due to surface horizontal level defect which occupy $25\;\%$ of total defect causes is the most commonly occur. 2) The second defect cause which occupy $15\;\%$ of total defect causes is the swell up phenomenon due to surface dry problem. For the prevention of water proofing defection in roof using urethane membrane, the followings are recommended. 1) Faultless surface treatment before using urethane membrane 2) Develop improved urethane membrane material 3) Improve urethane membrane construction technique

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.4
• /
• pp.34-42
• /
• 2018

Apartment is a typical type of housing preferred by the majority of people. However, and defect disputes occur because various defects such as cracks, subsidence, breakage, water leakage, dew condensation and dropout are confirmed with numerous structures and finishing materials. From this point of view, this paper analyzes defect frequency and costs of each warranty period by work types, and estimates defect risks by using defect dispute cases. It examined about 5,337 defect items for 32 apartment over ten years old. In this paper, there are 10 types of work types and the warranty liability period is divided into 6 categories. Based on these categories, defect frequency and costs are investigated, and finally defect risk of the warranty liability period by work types confirmed. As a result of this analysis, it was found that defect risk in RC and finishing work is very high. Especially the RC work revealed that there is a high risk of trying from the third year onwards and it was found that the defect risk up to the second year is high in the finishing work. Due to aging of RC structure, the defect risk gradually increases, and finishing work initially cause defect disputes because of the housing environment.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.2298-2304
• /
• 2023

Titanium alloys are expected to become one of the candidate materials for nuclear-powered spacecraft due to their excellent overall performance. Nevertheless, atomistic mechanisms of the defect accumulation and evolution of the materials due to long-term exposure to irradiation remain scarcely understood by far. Here we investigate the heavy irradiation damage in a-titanium with a dose as high as 4.0 canonical displacements per atom (cDPA) using atomistic simulations of Frenkel pair accumulation. Results show that the content of surviving defects increases sharply before 0.04 cDPA and then decreases slowly to stabilize, exhibiting a strong correlation with the system energy. Under the current simulation conditions, the defect clustering fraction may be not directly dependent on the irradiation dose. Compared to vacancies, interstitials are more likely to form clusters, which may further cause the formation of 1/3<1210> interstitial-type dislocation loops extended along the (1010) plane. This study provides an important insight into the understanding of the irradiation damage behaviors for titanium.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.6
• /
• pp.1157-1162
• /
• 2001

This paper deals with inspect algorithm using visual system. One of the major problems that arise during polymer production is the estimation of the noise of the color product.(bad pallets) An erroneous output can cause a lot of losses (production and financial losses). Therefore new methods for real-time inspection of the noise are demanded. For this reason, we have presented a development of vision system algorithm for the defect inspection of PE color pallets. First of all, in order to detect the edge of object, the differential filter is used. And we apply to the labelling algorithm for feature extraction. This algorithm is designed for the defect inspection of pallets. The labelling algorithm permits to separate all of the connected components appearing on the pallets. Labelling the connected regions of a image is a fundamental computation in image analysis and machine vision, with a large number of application. Also, we suggested vision processing program in window environment. Simulations and experimental results demonstrate the performance of the proposal algorithm.