• 마이크로전자및패키징학회지
• /
• 제9권4호
• /
• pp.17-23
• /
• 2002

최근 반도체 소자의 고속화 및 고집적화에 따라 배선 패턴이 미세화 되고 다층의 금속 배선 공정이 요구됨에 따라 단차를 줄이고 표면을 광역 평탄화 시킬 수 있는 STI-CMP 공정이 도입되었다. 그러나, STI-CMP 공정이 다소 복잡해짐에 따라 질화막 잔존물, 찢겨진 산화막 결함들과 같은 여러 가지 공정상의 문제점들이 심각하게 증가하고 있다. 본 논문에서는 이상과 같은 CMP 공정 결함들을 줄이고, STI-CMP 공정의 최적 조건을 확보하기 위해 트렌치 깊이와 STI-fill 산화막 두께가 리버스 모트 식각 공정 후, 트랜치 위의 예리한 산화막의 취약함과 STI-CMP공정 후의 질화막 잔존물 등과 같은 결함들에 미치는 영향에 대해 연구하였다. 실험결과, CMP 공정에서 STI-fill의 두께가 얇을수록, 트랜치 깊이가 깊을수록 찢겨진 산화막의 발생이 증가하였다. 트랜치 깊이가 낮고 CMP 두께가 높으면 질화막 잔존물이 늘어나는 반면, 트랜치 깊이가 깊어 과도한 연마가 진행되면 활성영역의 실리콘 손상을 받음을 알 수 있었다

• 대한안전경영과학회지
• /
• 제20권2호
• /
• pp.9-20
• /
• 2018

This study is empirically intended to look into the effects of HVAC management on condensation cause and prevention in indoor swimming pools. The findings are summarized as follows. First, the experience of condensation in indoor swimming pools showed that 132 out of 142 people in total experienced the condensation in indoor swimming pools, which they had a high experience rate of 92.3%. For the location of condensation, the wall joints were 46.8% and the windows were 34.5%, which a total of 72.3% occurred in the wall joints and windows. Second, the effect of construction design, HVAC management and building construction on the cause of condensation in indoor swimming pools showed that building construction had an effect on the cause and location of condensation depending on the seasonal time, partially adopting hypothesis 1. Third, the effect of condensation-causing factors on condensation-preventing factors in indoor swimming pools showed that condensation had a close relationship with air and temperature conditions depending on the time and location of condensation, adopting hypothesis 2. As for the above-stated findings, the HVAC management in indoor swimming pools is an important concern factor that continues to cause condensation despite the development of advanced construction materials. Especially, building construction is a main factor that has a direct effect on condensation in the HVAC management of facilities. This implies that the window management is important in maintaining the wall joints - which can suppress the selective use and defect occurrence of construction materials - or confined spaces for a long time.

• Journal of Microbiology
• /
• 제44권5호
• /
• pp.523-529
• /
• 2006

OSH3 is one of the seven yeast homologues of the oxysterol binding proteins (OSBPs) which have the major binding affinity to the oxysterols and function as regulator of cholesterol biosynthesis in mammals. Mutational analysis of OSH3 showed that OSH3 plays a regulatory role in the yeast-to-hyphal transition through its oxysterol-binding domain in Saccharomyces cerevisiae. The OSH3 gene was also identified in the pathogenic yeast Candida albicans. Deletion of OSH3 caused a defect in the filamentous growth, which is the major cause of the C. albicans pathogencity. The filamentation defect of the mutation in the MAPK-associated transcription factor, namely $cph1{\Delta}$ was suppressed by overexpression of OSH3. These findings suggest the regulatory roles of OSH3 in the yeast filamentous growth and the functional conservations of OSH3 in S. cerevisiae and C. albicans.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제12권3호
• /
• pp.63-67
• /
• 1990

Electrical burns of the lips are most frequently seen in small children, who are apt to chew on electrical cord or plug, the ends of extension cords in their mouth, saliva creates a short circuit across the terminals within the plug, causing an electrical burn. Tissue destruction with electrical burns is sudden and extensive. Extensive, deep coagulation necrosis is instaneously produced by the extreme temparatures of electrical arc. If the child is well grounded, the circuit flow through his body may cause cardiac arrest. The purpose of this report is to document two cases of electrical lip burn and reconstruction of the lip defect with some local flap techniques. For case 1, Z plasty & V-Y plasty and lengthening of the commissure and in case 2, Abbe flap technique was used and scar was revised later. Z-plasty and V-Y plastry were used for scar release and Abbe flap was designed on lower lip to meet the need of upper lip. For short of right lip width, lengthening of the commissure was done. We are to report the improvement with forementioned operation on the patient of electrical burn upon the lip.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.269-270
• /
• 2021

As the era of the Fourth Industrial Revolution arrives and the culture of contact-less was established due to the long-term COVID-19, the construction industry is striving to develop smart home services to expand the scope of information and communications technology (ICT) to provide convenience to residents. However, various defects are occurring in information and communications technology facilities in apartments, and related research is lacking. In this study, case studies and research methods of related prior studies are analyzed as a basis for identifying the types and causes of defects that occur in information and communications technology facilities. To analyze various studies, we divided them into studies on smart home Internet of Things (IoT), information and communications technology construction of apartments, and investigated their features and limitations. Plus, future research will be conducted on apartments within 10 years of completion among apartments completed by domestic construction companies to supplement the limitations of prior research. In addition, we will prepare basic data on defects of ICT construction by analyzing the major causes of defect types through the analysis of defect types and frequency by detailed work type of information and communications technology construction.

• 한국멀티미디어학회논문지
• /
• 제23권11호
• /
• pp.1383-1387
• /
• 2020

Recently, a 4-col 7-row LED Screen that provides various information of major roads and local governments has been installed and operated. However, due to deterioration due to changes in temperature and humidity, deterioration due to static electricity, and mechanical stress, partial module failure of the display may occur, which is a major cause of missing information of vitally given to citizens. However, there have been frequent cases where the 4-col and 7-row LED Screen that have failed due to reasons such as installed location where the signboards are installed on the road and outdoor, the lack of monitoring means at all times, and the lack of manpower is often neglected for a long time. Following this flow, this paper proposes a method to detect defective modules by analyzing the images collected through the camera fixed to the front part of the LED display.

• 전자공학회논문지
• /
• 제52권10호
• /
• pp.47-55
• /
• 2015

전자 산업의 발달과 함께 많은 전자 제어 장치가 차량 내부에 탑재됨에 따라 차량의 기능을 검증하는 것은 더더욱 어려워지고 있다. 차량의 기능 오작동은 인명손실의 우려가 있기 때문에 차량에 있어서 신뢰성은 무엇보다 중요하게 고려되어야 한다. 본 논문에서는 차량의 신뢰성 향상을 위한 CAN 통신 기반의 고장 진단 플랫폼을 제안한다. 양산 이후에도 독립적인 테스트 경로를 통한 구조적 테스트를 실시함으로써 차량의 신뢰성은 크게 증가할 것이다. 또한, 별도의 테스트 핀이 필요하지 않기 때문에 테스트 비용을 절감할 수 있다.

• Smart Structures and Systems
• /
• 제24권6호
• /
• pp.803-812
• /
• 2019

Triplex composite is an epoxy-bonded joint structure, which constitutes the secondary barrier in a liquefied natural gas (LNG) carrier. Defects in the triplex composite weaken its shear strength and may cause leakage of the LNG, thus compromising the structural integrity of the LNG carrier. This paper proposes an autonomous triplex composite inspection (ATCI) system for visualizing and classifying hidden defects in the triplex composite installed inside an LNG carrier. First, heat energy is generated on the surface of the triplex composite using halogen lamps, and the corresponding heat response is measured by an infrared (IR) camera. Next, the region of interest (ROI) is traced and noise components are removed to minimize false indications of defects. After a defect is identified, it is classified as internal void or uncured adhesive and its size and shape are quantified and visualized, respectively. The proposed ATCI system allows the fully automated and contactless detection, classification, and quantification of hidden defects inside the triplex composite. The effectiveness of the proposed ATCI system is validated using the data obtained from actual triplex composite installed in an LNG carrier membrane system.

• Journal of Korean Neurosurgical Society
• /
• 제54권4호
• /
• pp.355-358
• /
• 2013

Spinal extradural arachnoid cyst (SEAC) is a rare disease and uncommon cause of compressive myelopathy. The etiology remains still unclear. We experienced 2 cases of SEACs and reviewed the cases and previous literatures. A 59-year-old man complained of both leg radiating pain and paresthesia for 4 years. His MRI showed an extradural cyst from T12 to L3 and we performed cyst fenestration and repaired the dural defect with tailored laminectomy. Another 51-year-old female patient visited our clinical with left buttock pain and paresthesia for 3 years. A large extradural cyst was found at T1-L2 level on MRI and a communication between the cyst and subarachnoid space was illustrated by CT-myelography. We performed cyst fenestration with primary repair of dural defect. Both patients' symptoms gradually subsided and follow up images taken 1-2 months postoperatively showed nearly disappeared cysts. There has been no documented recurrence in these two cases so far. Tailored laminotomy with cyst fenestration can be a safe and effective alternative choice in treating SEACs compared to traditional complete resection of cyst wall with multi-level laminectomy.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1999년도 춘계학술발표회 초록집
• /
• pp.97-97
• /
• 1999

Dross formation in the zinc bath is inevitable under any condition as long as coating process on steel strip continues. Thus, bath aluminum and temperature are precisely managed to suppress the increase of dross. Also, excessive dross for normal coating process is generally eliminated physically by bubbling and skimming. Total amount of dross in the bath can be sometimes high enough to cause coating defect. On the other hand, local concentration of dross can make coating defect even with satisfactory level of total amount of dross. Reduction of dross in the bath was attempted by using ceramic foam filter made of mainly alumina. Dross in molten zinc was almost reduced to the levels of solubility of iron and aluminum in molten zinc at $450~460^{\circ}C$. Their solubility levels were confirmed by thermodynamic calculations or DEAL program. Two kinds of filters were tested for dross reduction. One was #20 ppi, porous per inch, and the other #30 ppi filter. Both were effective in reducing the bath dross to the solubility levels at the static state. Bath iron was reduced by 24 wt% and 19 wt% with #20 filter, and by 35 wt% and 29 wt% with #30 filter for GI and GA pot, respectively. Also, ceramic foam filter did not make any harm to the zinc bath composition after filtering test.