• Korea-Australia Rheology Journal
• /
• v.17 no.4
• /
• pp.157-164
• /
• 2005

Hydrodynamic characteristic of surfactant drag-reducing flows is still not fully understood. This work investigated the temperature and diameter effect on hydrodynamic characteristic of cationic surfactant drag reducing flows in pipes. Solution of oleyl bishydroxyethyl methyl ammonium chloride (Ethoquad O/12), 900 ppm, as a cationic surfactant and sodium salicylate (NaSal), 540 ppm, as a counter-ion was tested at 12, 25, 40, and $50^{\circ}C$ in pipes with diameter of 13, 25, and 40 mm. Drag reduction effectiveness of this surfactant solution was evaluated in 25 mm pipe from 6 to $75^{\circ}C$. Rheological characteristic of this solution was measured by stress control type rheometer with cone-and-plate geometry. Scale-up laws proposed by previous investigators were used to evaluate the flow characteristic of the solution. It was found that this surfactant solution has clear DR capability until $70^{\circ}C$. Result of this work suggested that temperature has a significant influence in changing the hydrodynamic entrance length of surfactant drag reducing flows. From rheological measurement, it was found that the solution exhibits Shear Induced Structure at all temperatures with different degree of peak viscosity and critical shear rate.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.3
• /
• pp.35-41
• /
• 2021

In this study, the effect of zwitterionic surfactant on Cu electrodeposition was investigated through cyclic voltammetry. With the addition of (dodecyldimethylammonio)propanesulfonate (DDAPS) as a representative zwitterionic surfactant in the electrolyte for Cu electrodeposition, the electrochemical Cu²⁺ reduction was inhibited on Cu and glassy carbon electrodes. Its inhibition effect was similar to that of cationic surfactant rather than anionic surfactant. Moreover, DDAPS interacted with chloride ion and exhibited the mass transfer-dependent inhibition behavior, which indicates that its inhibition function is associated with the formation of its surface aggregates on anion-covered Cu surface. In addition, adsorbed DDAPS slightly reduced the surface roughness of Cu electrodeposits. These characteristics were similar to those of cationic surfactant, but less obvious. It means the effect of DDAPS on Cu electrodeposition originates from the cationic head group which is shield by anionic head group.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.6
• /
• pp.38-45
• /
• 2007

Trichloroethylene (TCE) is a representative dense non-aqueous phase liquid (DNAPL) and has contaminated substance environments including soil and groundwater due to leakage and careless. DNPAL, has been treated by surfactant-enhanced aquifer remediation (SEAR). After application of SEAR, groundwater contains still surfactant as well as little amount of residual TCE. Permeable reactive barrier using zero-valent iron (ZW) is a very effective technology to treat the residual TCE in groundwater. In this study, the effect of the residual surfactant on the reductive dechlorination of residual TCE was investigated using ZVI. Mixed surfactant composed of nonioinic surfactant and cationic surfactant was used as a residual surfactant because of toxicity and enhancement of dechlorination rate. Structure of surfactant affected significantly the decrhlorination rate of TCE. Mixed surfactant system with relatively short polyethylene oxide (PEO) chain in nonionic surfactant, cationic surfactant did not affect TCE dechlorination rate. However, mixed surfactant system with relatively long PEO chain in nonionic surfactant shows that TCE dechlorination rate was significantly dependent on fraction of cationic surfactant and HLB of nonionic surfactant. Cationic surfactant with trimethyl ammonium group enhanced reductive dechlorination rate compared to that surfactant with pyridinium group.

• YAKHAK HOEJI
• /
• v.11 no.3_4
• /
• pp.17-21
• /
• 1967

At present, quarternary ammonium salts(cationic surfactant) and Tego compounds (amphoteric surfactant) are used as germicidal agent. In this paper, it was investigated whether their germicidal activities are influenced or not by some suspending agents which are added to them 0.005% benzalkonium chloride aq. solution and 0.05% dodecyl diaminoethyl glycine aq. solution sterilized respectively against Staphylococcus aureus and Escherichia coli within a minute. The solutions aded acacia, carboxymethyl cellulose, sodium alginate solutions to make to 0.005% to above surfactants solution decreased the germicidal activity, not being sterilized bacteria for more than 2 hours however, the solutions decreased the germicidal activity by addition of suspending agents such as acacia, carboxymethyl cellose, sodium alginate and bacteria were survival for more than 2 hrs, 0.05% of benzalkonium chloride and 0.1% dodecyl diaminoethyl glycine respectively would be sterilized within 10 minutes, when added to 5% suspending agents. This result show that bactericidal action of dodecyl diaminoethyl glycine is affected by suspending agents less than that of benzalkonium chloride.

• Food Science and Biotechnology
• /
• v.14 no.1
• /
• pp.131-136
• /
• 2005

The selective extraction behavior of lactoferrin (Lf) from whey protein mixture was examined using reverse micelles formed by the cationic surfactant, cetyldimethylammonium bromide (CDAB). The major whey proteins, including ${\beta}$-lactoglobulin, ${\alpha}$-lactalbumin and bovine serum albumin, were solubilized from aqueous phase to organic phase while Lf was recovered in the aqueous phase. The solubilization behaviors of the proteins were manipulated by the process parameters such as the pH and salt concentration of the aqueous phase and the surfactant concentration in the organic phase. Efficient forward extraction was achieved with sodium borate buffer (50 mM, pH 9) containing 50 mM KCl and organic phase containing 100 mM CDAB. Based on SDS-PAGE and densitometry, about 96% of the initial Lf remained in the aqueous phase after forward extraction. The dialyzed Lf fully maintained its bacteriostatic activity against E. coli O157:H7.

• YAKHAK HOEJI
• /
• v.21 no.3
• /
• pp.135-140
• /
• 1977

Solubilization of cholesterol, its fatty acid esters and gallstones were undertaken employing nonionic, anionic and cationic surfactants. Cholesterol was effectively solubilized by all of these surfactants. Cationic surfactants were most effective. However, cholesteryl myristate was not solubilized at all. In the dissolution test of gallstones in surfactant solutions, cationic surfactant solutions were exceptionally effective in dissolving gallstones. These results suggest the possible existence of interaction between alkylammonium radical and cholesterol on micellar surface.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.4
• /
• pp.419-429
• /
• 2014

Recent studies have been reported the presence of Endocrine Disrupting Compounds, Pharmaceuticals and Personal Care Products (EDC/PPCPs) in surface and wastewater, which could potentially affect to the complicate behavior in coupled presence of nano-colloid particles and surfactants (adsorption, dispersion, and partitioning). In this study, the adsorption of EDC/PPCPs by Single Walled Carbon Nanotubes (SWNTs) as a representative of nano-particles in cationic surfactant solutions were investigated. Hydrophobic interactions (${\pi}-{\pi}$ Electron Donor-Acceptor) have been reported as a potential adsorption mechanisms for EDC/PPCPs onto SWNTs. Generally, the adsorptive capacity of the relatively hydrophobic EDC/PPCPs onto SWNTs decreased in the presence of cationic surfactant (Cetyltrimethyl Ammonium Bromide, CTAB). This study revealed that the competitive adsorption occurred between CTAB cations and EDC/PPCPs by occupying the available SWNT surface (CTAB adsorption onto SWNTs shows five-regime and maximum adsorption capacity of 370.4 mg/g by applying the BET isotherm). The adsorption capacity of $17{\alpha}$-ethinyl estradiol (EE2) on SWNT showed the decrease of 48% in the presence of CTAB. However, the adsorbed naproxen (NAP) surely increased by forming hemimicelles and resulted in a favorable media formation for NAP partition to increase SWNTs adsorption capacity. The adsorbed NAP increased from 24 to 82.9 mg/g after the interaction of CTAB with NAP. The competitive adsorption for EDC/PPCPs onto SWNTs is likely to be a key factor in the presence of cationic surfactant, however, NAP adsorption showed a slight competition through $CH_3-CH_3$ interaction by forming hemimicelles on SWNT surface.

• Elastomers and Composites
• /
• v.50 no.4
• /
• pp.265-273
• /
• 2015

In this work, the emulsified asphalt with high phase stability and storage stability was prepared by using phase inversion emulsification and the surfactant mixed with cationic and nonionic surfactants. It was found that the asphalt together with Span 20, nonionic surfactant and DDA (Dimethyl Dodecyl Amine), cationic surfactant showed the most stable phase. The phase stability of the emulsified asphalt, therefore, was investigated through the particle size with mixed surfactant content, rheology behavior and Zeta potential value; the particle size decreased with the increase of the mixed surfactant content but the viscosity increased. The shear thinning behaviors and the Zeta potential value with 50 mV~60 mV were shown, which was found to be considered stable. In addition, SBR latex(Styrene-butadiene-rubber) and water dispersed Epoxy (EPD) were used to enhance the physical properties of the emulsified asphalt. The swelling and adhesion features of the emulsified asphalt were also studied with $CaCO_3$, Silica, and Montmorillonite (MMT). It was shown that the addition of SBR latex and MMT can be another way to improve the physical properties of the emulsified asphalt in that the lowest swelling feature was found.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.4
• /
• pp.667-674
• /
• 2007

Phase behavior for the mixed aqueous surfactant systems of cationic octadecyl trimethyl ammonium chloride (OTAC)/anionic ammonium dodecyl sulfate (ADS)/water was examined. Below the total surfactant concentrations of 1.5 m molal, mixed micelles were formed. At the total surfactant concentrations higher than 1.5 m molal, there appeared a region where mixed micelles and vesicles coexist. As the surfactant concentration increased, the systems looked very turbid and much more vesicles were observed. The vesicles were spontaneously formed in this system and their existence was observed by negative-staining transmission electron microscopy (TEM), small-angle neutron scattering (SANS) and encapsulation efficiency of dye. The vesicle region was where the molar fraction α of ADS to the total mixed surfactant was from 0.1 to 0.7 and the total surfactant concentration was above 5 × 10-4 molality. The size and structure of the vesicles were determined from the TEM microphotographs and the SANS data. Their diameter ranged from 450 nm to 120μm and decreased with increasing total surfactant concentration. The lamellar thickness also decreased from 15 nm to 5 nm with increasing surfactant concentration and this may be responsible for the decrease in vesicle size with the surfactant concentration. The stability of vesicles was examined by UV spectroscopy and zeta potentiometry. The vesicles displayed long-term stability, as UV absorbance spectra remained unchanged over two months. The zeta potentials of the vesicles were large in magnitude (40-70 mV) and the observed longterm stability of the vesicles may be attributed to such high ζ potentials.

• YAKHAK HOEJI
• /
• v.28 no.5
• /
• pp.275-282
• /
• 1984

The interaction between azo dyes and cationic surfactant was studied by absorption spectroscopy and fluorescent Rayleigh scattering. In order to presume the structure of formed micelle, methyl orange and ethyl orange as azo dyes and cetyltrimethylammonium bromide (CTAB) as cationic surfactant were used. Infomations about interaction parameter including absorption maxima, optimal conditions, and intensity of fluorescent Rayleigh scattering were obtained. When azo dyes and CTAB are formed 1 : 1 complex, it showed the strongest intensity of fluorescent Rayleigh scattering. On going from mixed micelle to homomicell, It suggests successively several intermediate steps of complex structure which can be distinguished clearly from one another.