• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.18-18
• /
• 2003

Natural clays are composed of oxide layers whose thickness is about 1nm and cations existing between the layers. A number of these layers makes primary particles with a height of about 8∼10nm and these primary particles make aggregates with a size of about 0.1∼10$\mu\textrm{m}$. When layered silicate was made to be organophilic, by exchanging the interlayer cations with organic cationic molecules, the matrix polymer can penetrate between the layers to give a nanocomposite, where 1nm-scal clay layers exist separately in a continuous polymer matrix. These nanostructured hybrid organic-inorganic composites have attracted the great interest of researchers over the last 10 years. They exhibit improved performance properties compared with conventional composites, because their unique phase morphology by layer intercalation or exfoliation maximizes interfacial contact between the organic and inorganic phases and enhances interfacial properties. Since the advent of nylon-6/montmorillonite nanocomposite developed by Toyota Motor Co., the studies on layered silicate-polymer nanocomposites have been successfully extended to other polymer systems. They greatly improved the thermal, mechanical, barrier, and even the flame-retardant properties of the polymers.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.150-153
• /
• 2009

Anion exchange polymer electrolyte pore-filling membranes consisting of the whole hydrocarbon materials were prepared by photo polymerization with various quaternary ammonium cationic monomers and characterized on the properties for applying to solid alkali fuel cell (SAFC). Hydrocarbon porous substrates such as polyethylene were used for the preparation of the pore-filling membranes. The hydroxyl ion conductivity of the polymer electrolyte membranes prepared in this research was dependent on the composition ratio of an electrolyte monomer and crosslinking agents used for polymerization. Furthermore, these pore-filling membranes have commonly excellent properties such as smaller dimensional affects when swollen in solvents, higher mechanical strength, lower fuel crossover through the membranes, and easier preparation process than those of traditional cast membranes.

• 한국환경보건학회지
• /
• 제40권2호
• /
• pp.137-146
• /
• 2014

Objectives: Feasibility of electrochemical oxidation of the aqueous non-biodegradable wastewater such as cationic dye Rhodamine B (RhB) has been investigated in an electrochemical reactor with solid polymer electrolyte (SPE). Methods: Nafion 117 cationic exchange membrane as SPE has been used. Anode/Nafion/cathode sandwiches were constructed by sandwiching Nafion between two dimensionally stable anodes (JP202 electrode). Experiments were conducted to examine the effects of applied current (0.5~2.0 A), supporting electrolyte type (0.2 N NaCl, $Na_2SO_4$, and 1.0 g/L NaCl), initial RhB concentration (2.5~30.0 mg/L) on RhB and COD degradation and $UV_{254}$ absorbance. Results: Experimental results showed that an increase of applied current in electrolysis reaction with solid polymer electrolyte has resulted in the increase of RhB and $UV_{254}$ degradation. Performance for RhB degradation by electrolyte type was best with NaCl 0.2 N followed by SPE, and $Na_2SO_4$. However, the decrease of $UV_{254}$ absorbance of RhB was different from RhB degradation: SPE > NaCl 0.2 N > $Na_2SO_4$. RhB and $UV_{254}$ absorbance decreased linearly with time regardless of the initial concentration. The initial RhB and COD degradation in electrolysis reaction using SPE showed a pseudo-first order kinetics and rate constants were 0.0617 ($R^2=0.9843$) and 0.0216 ($R^2=0.9776$), respectively. Conclusions: Degradation of RhB in the electrochemical reactor with SPE can be achieved applying electrochemical oxidation. Supporting electrolyte has no positive effect on the final $UV_{254}$ absorbance and COD degradation. Mineralization of COD may take a relatively longer time than that of the RhB degradation.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권5호
• /
• pp.326-331
• /
• 2001

With the aim of developing of pH-sensitive controlled drug release system, a poly(Llysine) (PLL) based cationic semi-interpenetrating polymer network (semi-IPN) has been synthesized. This cationic hydrogel was designed to swell at lower pH and de-swell at higher pH and therefore be applicable for achieving regulated drug release at a specific pH range. In addition to the pH sensitivity, this hydrogel was anticipated to interact with an ionic drug, providing another means to regulate the release rate of ionic drugs. This semi-IPN hydrogel was prepared using a free-radical polymerization method and by crosslinking of the polyethylene glycol (PEG)-methacrylate polymer through the PLL network. The two polymers were penetrated with each other via interpolymer complexation to yield the semi-IPN structures. The PLL hydrogel thus prepared showed dynamic swelling/de-swelling behavior in response to pH change, and such a behavior was influenced by both the concentrations of PLL and PEG-methacrylate. Drug release from this semi-IPN hydrogel was also investigated using a model protein drug, streptokinase. Streptokinase release was found to be dependent on its ionic interaction with the PLL backbones as well as on the swelling of the semi-IPN hydrogel. These results suggest that a PLL semi-IPN hydrogel could potentially be used as a drug delivery platform to modulate drug release by pH-sensitivity and ionic interaction.

• 한국응용과학기술학회지
• /
• 제23권4호
• /
• pp.290-299
• /
• 2006

This article investigated to polymer-clay nanocomposite, especially in interfacial respect clay structure, its dispersion into polymer matrix, and clay modification is studied. The cationic exchange of surfactants with clay gallery results in preparing organo-clay capable of compatiblizing to monomer or polymer and increasing interlayer adhesion energy due to expansion of interlayer spacing. The orientation of surfactant in clay gallery is affected by chemical structure and charge density of clay, and interlayer spacing and volume is increased with alkyl chain length of surfactant, or charge density of clay. Also, the interaction between clay and polymer in preparing polymer-clay nanocomposite is explained thermodynamically. In the future, the study and development of polymer-clay nanocomposite is paid attention to the interfacial adhesion, clay dispersion within polymer, mechanism of clay intercalation or exfoliation.

• 폴리머
• /
• 제26권3호
• /
• pp.344-352
• /
• 2002

본 연구에서는 두 가지 열잠재성 양이온 촉매인 triphenyl benzyl phosphoinium hexa-fluoroantimonate (TBPH)와 benzyl 2-methylpyrazinium hexafluoroantimonate (BMPH)를 새로이 합성하였다. 그리핀 TBPH 혹은 BMPH 1 phr에 의해 개시되어진 이관능성 에폭시 수지(diglycidylether of bisphenol A, DGEBA)의 열 및 기계적 특성들을 연구하였다. 그 실험적인 결과들로서, 에폭시/TBPH 시스템은 에폭시/BMPH 시스템 보다 더 높은 경화 온도와 임계응력 세기인자 ($K_{IC}$) 값을 보였다. 이것은 TBPH에서 4개의 페닐기의 느린 열확산 속도와 벌크 구조 때문으로 사료된다. 그러나, Coats-Redfern 방법에 의하여 결정된 분해 활성화 에너지는 TBPH의 경우가 더 낮게 나타났다. 이러한 결과는 TBPH의 입체장애에 의해서 끊어진 짧은 사슬 구조가 발달되었기 때문인 것으로 사료된다.

• Journal of Microbiology and Biotechnology
• /
• 제26권5호
• /
• pp.953-958
• /
• 2016

Chitosan-based film-forming gel is regarded as a promising vehicle for topical delivery of antimicrobial agents to skin wounds, since it protects from microbial infection and the cationic polymer itself possesses antibacterial activity. In this study, possible synergistic interaction against common skin pathogens between the cationic polymer and tyrothricin (TRC), a cyclic polypeptide antibiotic, was investigated, by determining the concentration to inhibit 90% of bacterial isolates (MIC). The addition of the polysaccharide to TRC dramatically reduced the MIC values of TRC by 1/33 and 1/4 against both methicillin-resistant and methicillin-susceptible Staphylococcus aureus, respectively. The synergism of TRC and chitosan combination against both strains was demonstrated by the checkerboard method, with a fractional inhibitory concentration index below 0.5. Moreover, co-treatment of TRC and chitosan exhibited antibacterial activity against Pseudomonas aeruginosa, due to the antibacterial activity of chitosan, whereas TRC itself did not inhibit the gram-negative bacterial growth. These findings suggested that the use of chitosan-based film for topical delivery of TRC could be an alternative to improve TRC antimicrobial activity against strains that are abundant in skin wounds.

• 한국염색가공학회지
• /
• 제14권2호
• /
• pp.94-94
• /
• 2002

A number of studies have been introduced on the use of quaternary cationic agents having various reactive groups, which can improve the substantivity of anionic dyes, specially direct dyes, towards cotton. In the case of direct dyes, it is well known that they are widely used due to their convenience to apply and low cost, whilst they display poor levels of fastness properties to washing. Thus many applications using direct dyes in the textile fields have been still enjoyed in the areas where a higher level of wet fastness is specially not required. This work herein comprises that in order to improve the substantivity of direct dyes towards cotton, cellulose-reactive allylamine polymer namely, triazinyl N,N′-dimethyl-N,N′-diallyl ammonium chloride was prepared and treated onto cotton to provide cationic properties within substrates. This application showed that even low concentration of electrolytes being present, the direct dyes were exhausted well on the cationized cotton and that the rate of dye uptake by treated cotton was faster than that of untreated sample. Furthermore the antimicrobial properties were observed from the cationized samples.

• 폴리머
• /
• 제26권1호
• /
• pp.80-87
• /
• 2002

전자선 및 열경화 방법을 사용한 에폭시 수지의 경화거동과 열안정성 효과를 알아보기 위하여 비교 연구를 수행하였다. 본 연구에서는, benzylquinoxalinium hexafluoroantimonate(BQH)가 에폭시 수지의 잠재성 양이온 촉매로서 사용되었다. 열중량분석(TGA)에 의하면, Coats-Redfern 방법에 기초한 분해활성화 에너지는 열경화 방법의 경우가 더 높게 나타났다. 이것은 열로 경화되어진 에폭시 수지의 높은 가교 밀도로 인해 열확산 속도가 느려졌기 때문으로 사료된다. 그러나, 전자선 방법으로 경화되어진 에폭시 수지에서는 안정한 짧은 고리구조, 적분열분해온도, 그리고 높은 충격강도를 위한 최종적인 연성 특성을 향상시키는 수산화기의 증가가 근적외선 분광기(NIRS) 측정으로 관찰되었다.

• Bulletin of the Korean Chemical Society
• /
• 제22권1호
• /
• pp.46-52
• /
• 2001

To evaluate the non-ionic polymer, poly(ethylene glycol) (PEG), as a component in cationic copolymers for non-viral gene delivery systems, PEG was coupled to polyethylenimine (PEI). We present the effects of different degrees and shapes of pegylation of PEI on cytotoxicity, water solubility and transfection efficiency. This work reports the synthesis and characterization of a series of cationic copolymers on the basis of the conjugates of PEI with PEG. The modified molecules were significantly less toxic than the original polymer. Moreover, the chemical modification led to enhancement of their solubility. The comparison of pegylated PEIs with different degrees of derivation showed that all the polymers tested reached comparable levels of transgene expression to that of native PEI. As assessed by agarose gel electrophoresis, even highly substituted PEI derivatives were still able to form polyionic complexes with DNA. However, aside from an increase in solubility and retention of the ability to condense DNA, methoxy-PEG-modified PEIs resulted in a significant decrease in the transfection activity of the DNA complexes. In fact, the efficiency of the copolymer was compromised even at a low degree of modification suggesting that the PEG action resulting from its shape is important for efficient gene transfer. The mode of PEG grafting and the degree of modification influenced the transfection efficiency of PEI.