• 자원환경지질
• /
• 제32권3호
• /
• pp.307-315
• /
• 1999

Four organic polymers were mixed with mothmorillonite. Two cationic polymers a hi로 molecular weight polyacrylamide (494C) and a low molecular weight polymer (587C).Two anionic polymers include a high molecular weight polymer (aerotil). Each clay supension series were allowed to stand for 24 hours and were centrifuged, and the clay plugs were washed and dried. The dried samples investigated by XRD, IR and CEC measurement. The suspended clay containing anionic polymers was not flocculated at any concentratuons of polymer. But the suspendions containing two cationic polymers were rapidly flocculated at almost all concentrations. the d(001) spacings of Na-montmorillonite after being with cationic polymer 587C show about 15$\AA$ suggesting the polymers may have entered the interlayer spaces. The polymer 494C-treated sample produced double peaks of about 12 and 15$\AA$ in XRD. It indicates that the high molecular weight polymer. And cationic polymer 494C may be adsorbed mainy on the outside surface of clay, and some polymers may peretrate into olny interlayers in the margin of montmorillonite particles because of its high molecular weught. CEC of polumer 587-treated sample was reduecd mmarkedly suggesting polymer blocks CEC sites. The d(001) spacings of Ca-montmorillonite after being treated with cationic polymers show about 15$\AA$ suggesting that the interlayer spaces have not been expanded. In the experiment using a dilute Ca-bearing solution, the suspended caly containinf anionic polymers was flocculated. The results indicate that the flocculation behavior of montmorillonite-polymer supension depends on not only polymer properties such as concentration, electric charge and molecular weight but also compositions of solvent.

• 펄프종이기술
• /
• 제40권1호
• /
• pp.1-8
• /
• 2008

It is essential to use base papers having proper surface characteristics in coating operation for improving coated paper quality and coater runnability. To fulfill these purposes, surface sizing of coating base stock with oxidized starch is commonly practiced. Use of cationic starch for surface sizing improves coated paper quality since cationic starch penetrates less into paper structure. The immediate objective of this study was to examine the influence of surface sizing with starch solutions containing cationic polymers on the rheology of coating colors and the effect on physical properties of coated papers. Changes of rheological characteristics of coating colors placed on the plastic substrate surface sized with cationic and anionic starch were determined. Results of rheological test showed that cationic polymer surface sizing agent increased electrostatic interaction with coating colors and increased storage modulus. This new technology of using cationic polymer as surface sizing additive was considered to be advantageous for base papers at low basis weights since it would improve the coverage and optical properties of coated papers.

• 한국환경보건학회지
• /
• 제30권3호
• /
• pp.253-258
• /
• 2004

Synthetic organic polyelectrolytes can be used to condition sludges to enhance their dewaterability. Intermittent aerobic digestion is an useful digestion technology and has many advantages like neutral pH, low installation cost and easiness to operation. The objectives of this study were to investigate the dewaterability of intemittent aerobic digestion sludge and to find the relationship between dewaterability and particle size distribution change under the conditioning of intermittent aerobic digestion sludge by cationic polyelectrolyte. Digested sludge from intermittent aerobic digestion was used and cationic polyacrylamide polymer was added as a conditioner. CST(capillary suction time), TTF(time-to-filtration) were tested as a dewaterability index and the number of particle distribution was analyzed using particle size analyzer. The results indicate that cationic polyelectrolytes is useful to enhance dewaterability of intermittent aerobic digestion sludge. Mean particle diameter was increased as polymer dosage increased and its value was reached up to 100 mm on the condition of optimal cationic polymer dosage. CST and TTF are well correlated with mean particle diameter when the weighting order is 1.7. By the optimal conditioning with cationic polymer, particles in the filtrate are also reduced significantly and this means that conditioning is helpful to main stream by reducing SS loading from return flow.

• Bulletin of the Korean Chemical Society
• /
• 제34권7호
• /
• pp.2016-2022
• /
• 2013

Ionically modified ${\beta}$-cyclodextrins, which have excellent water-solubility, have been interested in purification technology as well as drug carrier system. The present study summarizes the synthesis and characterization of cationic and anionic ${\beta}$-cyclodextrin (${\beta}$-CyD) products using by polycondensation. The oligo (${\beta}$-CyD)s are synthesized from ${\beta}$-CyD, epichlorohydrin (EP) and choline chloride (CC; for cationic polymer) or chloroacetic acid (CAA; for anionic polymer) through one step polycondenstaion process. Unlike the previous studies, we successfully purified the ionic ${\beta}$-CyD condensation products from the ${\beta}$-CyD reaction mixtures and accomplished a great level of structural analysis. The detailed structural analysis of these ionic ${\beta}$-CyD compounds is done by $^1H$ NMR, MALDI-TOF as well as GPC analysis and confirms the formation of oligomers with a few units of ${\beta}$-CyD. We found that the sequence of reactant addition also could effect on the molecular weight of the resulting product as well as the molar ratio of the reactants. Finally, we used the cationic and anionic ${\beta}$-CyD oligomers for fabricating multilayer films by layer-layer process.

• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3593-3596
• /
• 2012

The water-soluble conjugated polymer with fluorescence quenching as a result of electrostatic interaction and aggregation was synthesized through Suzuki polymerization. The absorption and emission of anionic polymer (a-PFP) is blue shifted as compared with cationic polymer (c-PFP) although getting same backbone, and the absolute PL quantum efficiency of a-PFP in water is over 90% due to good solubility in aqueous solution. We anticipate that the fluorescence quenching of anionic and cationic polymers, with same conjugated backbone, could be shown in aqueous solution.

• 폴리머
• /
• 제28권6호
• /
• pp.502-508
• /
• 2004

암을 치료하기 위한 양이온성 리포솜은 화학치료요법의 분야에서 발전되어 왔다. 양이온성 리포솜은 음이온성의 세포 표면에 정전기적 상호작용에 의해 결합이 된다. 본 연구의 목적은 음이온성 세포와 이온결합을 할 수 있는 양이온성 리포솜을 제조하는 것이다. 양이온성 리포솜은 지질인 1,2-디스테로일-sn-글리콜-3-포스포에탄올아민 (DSPE)과 양이온성 고분자인 폴리에틸렌이민 (PEI)을 그라프트 중합으로 합성된 물질로부터 제조하였다. 리포솜 표면의 이온 특성은 제타 포텐셜을 측정하여 확인하였다. 소 혈청 수용액에서 리포솜의 혈장 단백질 흡착 특성은 입자 크기와 탁도 변화를 측정하여 확인하였다. 완충 용액 속에서 리포솜 안정성을 예측하기 위하여 입자 크기를 7일 동안 상온에서 측정하였다. 양이온성 리포솜은 소 혈청 수용액에서 많은 양의 혈장 단백질이 흡착되었다. 이는 혈장 단백은 음전하를 가지고 있어서 양이온성 리포솜의 표면과 잘 붙기 때문이다. 양이온성 폴리에틸렌이민을 이용한 리포솜의 표면 변형은 소 혈청 수용액 내에서 단백질 흡착을 강화시킨다는 것을 예상하게 한다. 또한, 제조된 리포솜의 완충 용액 내에서 7일 동안 안정한 상태임을 관찰하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권7호
• /
• pp.2187-2192
• /
• 2012

This study presents a facile way synthesizing disc-like lipid bilyaer nanostructures with a cationic amphiphilic polyelectrolyte. The cationic amphiphilic polyelectrolyte was in a form of partially quarternized copolymer and was synthesized with 2-(dimethylamino)ethyl methacrylate and stearyl methacrylate. At some concentration ranges of the polymer, the addition of the polymer to lipid components during the preparation of bilayer nanostructures resulted in discs with a fairly high yield (~99%). The mechanism for the formation of the nanostructures was discussed based on the physical properties of these nanostructures and by comparing the nanostructures obtained with an anionic amphiphilic polyelectrolyte.

• Macromolecular Research
• /
• 제9권4호
• /
• pp.206-209
• /
• 2001

One of the approaches to obtain functional polymer is polymerization of a monomer having two functional groups. Although polymerization of a monomer having two different types of functional group is general, the author has been interested in the polymerization of a monomer having two similar types of functional group. This work shows the preparation and selective polymerization of 4-methylene-2-styryl-1,3-dioxolane having two similar reactive double bonds via cationic polymerization at ambient temperature. Cationic ring-opening polymerization of 4-methylene-2-styryl-1,3-dioxolane using benzylsulfonium salt as a photo-initiator quantitatively afforded high molecular weight of poly(keto-ether).

• 대한화장품학회지
• /
• 제36권2호
• /
• pp.93-97
• /
• 2010

본 연구에서는 샴푸에 널리 사용되는 양이온성 폴리머 중, 양이온성 구아 폴리머를 선택적으로 사용하여, 다양한 성능평가를 통해 0.7 % 질소함량 이상의 치환도와 190~200 cps사이의 점도를 가지는 새로운 양이온성 구아 폴리머를 개발하였다. 성능평가로는 헹굼 시 모발 부드러움(Wet combing ability), 폴리머의 잔존정도와 실리콘의 흡착정도를 측정하였으며 최종적으로 관능평가를 실시하였다. 본 연구에서 개발된 양이온성 구아 폴리머를 배합하면 샴푸 사용감을 최적화할 수 있을 것이다.

• Journal of Pharmaceutical Investigation
• /
• 제26권2호
• /
• pp.119-124
• /
• 1996

To develop oral controlled release dosage forms, ionic interactions between polymers and drugs were evaluated. Hydroxypropylmethyl cellulose and carboxymethylene were used as model nonionic and ionic polymers, respectively. 5-fluorouracil, propranolol-HCl and sodium salicylate were selected as model nonionic, cationic and anionic, respectively. Polymer-drug mixtures were compressed into tablets and drug release kinetics from these tablets were determined. Drug release from the tablets made of the nonionic polymer was not affected by the charge of drugs, rather, was regulated by the solubility of drugs in different pH releasing media. However, drug release kinetics were significantly affected when drug-polymer ionic interactions exist. Enhanced drug release was observed from anionic drug-anionic polymer tablets due to ionic repulsion, whereas drug release was retarded in cationic drug-anionic polymer tablets owing to ionic attractive force. Therefore, the results suggested that the polymer-drug interactions are important factors in designing controlled release dosage forms.