• 펄프종이기술
• /
• 제42권4호
• /
• pp.71-77
• /
• 2010

To utilize modified pulp fibers in papermaking system, it is necessary to evaluate the interaction between modified fibers and papermaking additives. Fluorescent whitening agent (FWA) is an important additive which has been widely used for production of writing and printing paper. We modified pulp fiber surface by Layer-by-Layer multilayering of polyelectrolytes, and investigated the interaction between these fibers and FWA used in internal addition or surface treatment. Pulp fiber with cationic surface charge showed a good affinity to internal FWA. For FWA in surface sizing agent, whiteness and brightness of paper was dependent on pickup weight and polyelectrolyte type. Pulp fibers with C-starch/PSS multilayer showed better optical properties than poly-DADMAC/PSS treatment. It indicated that polyelectrolyte type in Layer-by-Layer multilayering as well as a good affinity to FWA is important to get better whiteness and brightness.

• Fibers and Polymers
• /
• 제7권2호
• /
• pp.117-122
• /
• 2006

The dye-resist effect and leveling properties of hetero-mulifunctional dye-resist agents in acid dyeing of wool were investigated. The dye-resist agent with dichlorotriazinyl group achieved better resist effectiveness than those with monochlo-rotriazinyl group. The resist effectiveness was improved by increasing the number of sulfonate group in dye-resist agents. Also, the resist agents with more sulfonate groups showed better dye-assist effectivness, attributable to the increased electrostatic attraction between dye-resist agents and the cationic dye. However, the leveling properties of dye-resist agents decreased with the number of sulfonate groups in the molecule.

• 대한화장품학회지
• /
• 제14권1호
• /
• pp.16-37
• /
• 1988

A new quaternary ammonium compound, hydrolyzed ginseng-sapoin quaternary (HGSQ), from hydrolyzed Korean ginseng-saponin and 2, 3-epoxypropyltrimethyl ammonium chloride has been developed as a conditioning agent for hair care products. This structure has the hydrophilic group from the introduced cationic and the hydrophobic group from the aglycone of ginseng saponin. Its properties: surface tension, conductivity, critical micelle concentration, eye irritation, sorption onto hair, force reduction (%) for 20% extension and moisture retention effect comparing with the commercial standards. Also half-head tests of HGSQ-containing shampoo were carried out to compare the conditioning effects in shampoos.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제26회 춘계학술대회논문집
• /
• pp.229-232
• /
• 2006

Tetrahydrofuran(THF)과 Ethylene oxide(EO) 또는 EO를 단량체로 하여 양이온 개환중합을 이용한 새로운 합성방법으로 random 또는 tri-block HTPE(Hydroxyl-terminated polyether)를 합성할 수 있었다. 합성된 random과 tri-block HTPE를 IPDI/N-100혼합 디이소시아네이트 경화제와 촉매로 TPB(triphenylbismuth)를 사용하여 폴리우레탄을 제조하였으며, 혼합 이소시아네이트 화합물의 비율에 따른 폴리우레탄의 기계적 특성을 연구하였다. 그리고 폴리 우레탄 추진제 바인더 제조를 위한 prepolymer인 합성된 HTPE의 최적 경화 조건을 찾기 위해 HTPE의 후처리 과정, 우레탄 합성시 사용되는 촉매의 양 등의 영향에 대해 알아보았다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.221-226
• /
• 2008

Hydroxy-terminated polyether의 새로운 합성방법인 양이온 개환 공중합에 의해서 Ethylene oxide와 Tetrahydrofuran을 공중합 하였다. 중합은 1,4-Butandiol 존재 하에 $BF_3$ THF를 촉매로 반응이 진행되어 잘 제어된 Polyetherdiol을 합성할 수 있었다. Polyurethane 반응은 Polyetherdiol과 경화제로써 I-PDI/N-100 혼합물을 사용하였고, 경화촉매로 TPB/MA 혼합물을 사용하여 합성하였다. 이렇게 합성된 Polyurethane은 현재 미국에서 시판중인 ATK HTPE를 이용한 Polyurethane과 기계적 특성과 경화 거동을 비교 분석하였다.

• 펄프종이기술
• /
• 제45권4호
• /
• pp.21-26
• /
• 2013

The effect of esterified starch as surface sizing agent for inkjet printing paper has been evaluated and compared with oxidized starch. Also the influence of various additives including cationic poly-DADMAC, stearic acrylic copolymer, calcium chloride, and GCC was examined. Results showed that starch ester gave higher ink density than oxidized starch. Addition of poly-DADMAC improved water fastness. In general, low molecular weight poly-DADMAC performed better than high molecular weight one, and it was attributed to the fact that it gave more uniform film forming characteristics in surface sizing. Use of styrene acrylic acid copolymer increased hydrophobicity of the paper surface, but it did not increase the ink density. Use of GCC and calcium chloride had only marginal effect on printing quality.

• 펄프종이기술
• /
• 제32권4호
• /
• pp.27-33
• /
• 2000

A new technique for fractionating pulp stock into a long fiber portion and fines fraction was developed by KRICT in order to enhance the drainage and strength properties of recycled OCC pulp. In order to investigate the effect of fines contents in stock and stages of flotation on fractionation efficiency, flotations were performed at varied fines contents and flotation stages. Based on the result of multi-stage flotation fractionation it could be said that fines smaller than 15${\mu}{\textrm}{m}$ stabilize flotation froth of OCC. Although the amounts and the fines contents of flotation reject could be increased by multi-stage flotation fractionation of OCC, flotation stages more than 3 times were found to be inefficient in terms of fines concentrating degree. In order to satisfy the both conditions of reducing long fiber loss and of increasing flotation reject, several kinds of fractionating promoters were searched and investigated. And high molecular weight cationic polyacrylamide was chosen as a long fiber flocculating and flotation froth-stabilizing agent.

• Environmental Engineering Research
• /
• 제11권4호
• /
• pp.208-216
• /
• 2006

In order to create a single flocculant/dual flocculation system, polyacrylamide-co-trimethyl ammonium ethyl acrylate chloride (TAEAC) polymers with varying molecular weights and structures were prepared for use of flocculants. The higher the cationic density of the polymer is higher, the higher was the conversion rate and the ratio of monomer. An acrylamide as nonionic monomer was less reactive than a TAEAC as cationic monomer. The branched polymer which was polymerized with a cross-linking agent, N, N-methylene bis-acrylamide had a higher stability and higher viscosity than a linear polymer but its dewatering efficiency was poor in a single flocculation system. In the case of single flocculant/dual flocculation, the branched polymer has better flocculation efficiency and the water content of the dewatered cakes was lower than the others, as the result of a re-flocculation effect. The optimum conditions for dual flocculation are a sequence in which the $1^{st}$ and $2^{nd}$ dosage are 75% and 25%/total dosage of a single flocculation system. The dewatering efficiency of a dual flocculation system is improved considerably from 10 to 25% under the experimental conditions used herein.

• Journal of Microbiology and Biotechnology
• /
• 제28권8호
• /
• pp.1299-1309
• /
• 2018

We previously reported on lactophoricin (LPcin), a cationic ${\alpha}-helical$ antimicrobial peptide derived from bovine milk, which has antimicrobial effects on Candida albicans as well as Gram-positive and Gram-negative bacteria. In this study, we designed the LPcin-YK3 peptide, a shorter analog of LPcin, and investigated its antimicrobial activity. This peptide, consisting of 15 amino acids with + 3 net charges, was an effective antimicrobial agent against the on the Gram-positive strain, Staphylococcus aureus (MIC: $0.62{\mu}g/ml$). In addition, the hemolytic activity assay revealed that the peptide was not toxic to mouse and human erythrocytes up to $40{\mu}g/ml$. We also used circular dichroism spectroscopy to confirm that peptide in the presence of lipid has ${\alpha}-helical$ structures and later provide an overview of the relationship between each structure and antimicrobial activity. This peptide is a member of a new class of antimicrobial agents that could potentially overcome the problem of bacterial resistance caused by overuse of conventional antibiotics. Therefore, it could be used as a therapeutic or natural additive, particularly in the cosmetics industry.

• 펄프종이기술
• /
• 제44권4호
• /
• pp.62-68
• /
• 2012

This study was carried out to evaluate the effect of PCC loading at thick stock on the physical properties of paper. The effect of starch addition(2, 4 and 6%) and mixing time(5, 10 and 20 min.) on the filler retention and paper properties were investigated. Optimum dosage of cationic starch as a fixing agent was 4%, and mixing time did not showed any significant effect on the filler retention. PCC loading at thick stock was more effective to improve bulk and opacity than PCC loading at thin stock, although their improvement was not so significant. It was also found that the strength properties could be improved by the loading at thick stock. PCC loading method at thick stock could be considered as one of potential approaches for further improving of paper properties, although further research works are required in order to apply the PCC loading at thick stock in the paper mill.