• Journal of Pharmaceutical Investigation
• /
• 제29권4호
• /
• pp.309-313
• /
• 1999

This study was prepared to develop the sustained release dosage form of phenylpropanolamine hydrochloride (PPA) by complexation with cation exchange resin(CER). The PPA-CER complex was confirmed by differential scanning calorimetry(DSC) thennogram, indicating a relative shift of an endometric peak of PPA to higher temperature. The loading efficiency was increased as the amount of PPA was increased as well as the time of fractional exchange was advanced as the temperatures were increased. Loading efficiency, fractional exchange, reaction rate constant and activation energy were highly dependent on the temperature and drug : resin ratio. The optimal ratio of PPA and resin was estimated to be 10: 10 for the sustained release.

• Korean Chemical Engineering Research
• /
• 제56권3호
• /
• pp.361-369
• /
• 2018

A manufacturing method has been devised to prepare novel heterogeneous cation exchange membranes by mixing ethylene vinyl acetate (EVA) copolymers with a commercial cation exchange resin. Optimum material characteristics, mixture ratios and manufacturing conditions have been worked out for achieving favorable membrane performance. Ion exchange capacity, electrical resistance, water uptake, swelling ratio and tensile strength properties were measured. SEM analysis was used to monitor morphology. Effects of vinyl acetate (VA) content, melt index (MI) and ion exchange resin content on properties of heterogeneous cation exchange membranes have been discussed. An application test was carried out by mounting a selected membrane in a membrane capacitive deionization (MCDI) system to investigate its desalination capability. 0.92 meq/g of ion exchange capacity, $8.7{\Omega}.cm^2$ of electrical resistance, $40kgf/cm^2$ of tensile strength, 19% of swelling ratio, 42% of water uptake, and 56.4% salt removal rate were achieved at best. VA content plays a leading role on the extent of physical properties and performance; however, MI is important for having uniform distribution of resin grains and achieving better ionic conductivity. Overall, manufacturing cost has been suppressed to 5-10% of that of homogeneous ion exchange membranes.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 추계학술논문요약집
• /
• pp.351-352
• /
• 2018

• 공업화학
• /
• 제8권1호
• /
• pp.67-75
• /
• 1997

LLDPE와 미분말 상태인 강산성 양이온 교환 수지를 사용하여 압출기를 통해 막상으로 성형한 후 증류수와 NaCl 포화 수용액상에서 후처리하여 불균질 양이온 교환막을 제조하고 특성화하였다. 증류수 및 NaCl 포화 수용액 중에서 후처리를 통하여 양이온 교환 수지 입자가 함수, 팽윤되어 폴리에틸렌과 이온 교환 수지 사이에 cavity가 발생하며 동시에 양이온 교환 수지의 팽윤 압력에 의해 결합제에 큰 힘이 작용하기 때문에 폴리에틸렌에 micro-crack이 생성되므로 전기 화학적, 물리적 특성 값이 향상되었다. 또한 후처리 시간 30분과 후처리 온도 $90^{\circ}C$에서 최적의 조건을 갖는 우수한 불균질 양이온 교환막이 제조되었다.

• 대한화학회지
• /
• 제3권1호
• /
• pp.18-22
• /
• 1954

The cation exchange resins are synthesized from p-phenolsulfonic acid, formalin, and sodium hydroxide catalyser, and the ion exchange properties of them are studied with respect to their reactant ratios. Maximum exchange capacity was 2.06 me/G, much smaller than the theoretical value of 3.42 me/G to be expected for that of the structure: Under the present experimental conditions, much -SO3H radical should have been split away.

• 대한화학회지
• /
• 제30권1호
• /
• pp.63-68
• /
• 1986

양이온 교환수지를 이용하여 희토류 원소들의 용리현상을 연구하였다. 희토류 원소를 EDTA로 착물로 만들어 수지상단에 일정량 흡착 시킨 후 EDTA용액으로 용리하는 방법이 희토류 원소를 직접 양이온 교환수지에 흡착시키고 용리시키는 방법보다 희토류 원소들이 빨리 용리되어 용리액과 용리시간이 절약 되었다. 그러나 분리능은 약간 감소 하였다. 용리되는 순서는 착물의 안정도 상수가 큰 원소가 먼저 용리 되었다.

• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3665-3676
• /
• 2023

The use of ion exchange resins to remove ionic impurities from solution is prevalent in industrial process systems, including in the primary heat transport system (PHTS) purification circuit of nuclear power plants. Despite its extensive use in the nuclear industry, our general understanding of ion exchange cannot fully explain the complex chemistry in ion exchange beds, particularly when operated at or near their saturation limit. This work investigates the behaviour of mixed-bed ion exchange resin, saturated with species representative of corrosion products in a CANDU (Canadian Deuterium Uranium) reactor PHTS, particularly with respect to iron chemistry in the resin bed and the removal of lithium ions from solution. Experiments were performed under deaerated conditions, analogous to normal PHTS operation. The results show interesting iron chemistry, suggesting the hydrolysis of cation resin bound ferrous species and the subsequent formation of either a solid hydrolysis product or the soluble, anionic Fe(OH)₃^-.

• 한국환경과학회지
• /
• 제16권8호
• /
• pp.907-912
• /
• 2007

Ion exchange resin was used to remove silica ion at ultralow concentration. The effects of temperature, type of ion exchange resin and single/mixed-resin systems on removal efficiency were estimated. As temperature increased, the slope of concentration profile became stiff, and the equilibrium concentration was higher. In the single resin system, the removal of silica was continued up to 400 min, but the silica concentration was recovered to initial concentration after 400 min due to the effect of dissolved $CO_2$. In the mixed-resin system it took about 600 min to reach equilibrium. Because of faster cation exchange reaction than anion exchange reaction, the effect of $CO_2$ could be removed. Based on the experimental results carried out in the mixed-resin system, the selectivity coefficients of silica ion for each ion exchange resin were calculated at some specific temperatures. The temperature dependency of the selectivity coefficient was expressed by the equation of Kraus-Raridon type.

• 한국환경과학회지
• /
• 제18권12호
• /
• pp.1411-1416
• /
• 2009

Several adsorbents were tried to remove the selenium ions from industrial wastewater and the following ascending order of the adsorption performance for the selenium at pH 9 was observed: cation exchange resin < chelate resin < zeolite < brown marine algae < granular activated carbon < anion exchange resin. Initial concentration of selenium(146 mg/L) in industrial wastewater was reduced to 63 mg/L of selenium at pH 9 by neutralization process. The maximum uptake of Se calculated from the Langmuir isotherm with anion exchange resin was 0.091 mmol/g at pH 10 and that with granular activated carbon was 0.083 mmol/g at pH 6. The affinity coefficients of Se ion towards anion exchange resin and granular activated carbon were 3.263 L/mmol at pH 10 and 0.873 L/mmol at pH 6, respectively. The sorption performance of anion exchange resin at the low concentration of Se, namely, was much better than that of granular activated carbon. The Se ions from industrial wastewater throughout neutralization process and two steps of adsorption using anion exchange resin was removed to 97.7%.

• Applied Biological Chemistry
• /
• 제2권
• /
• pp.45-52
• /
• 1961

The decomposition of malathion in dust for mulations prepared from four Korean tales as carriers during storage period has been studied. Amberlite CG-120, a cation exchange resin . which has higher cation exchange capacity than tales, was also used as a carrier in hope of finding out the effect of nagative charge upon the decomposition of malathion. Besides the original talc powders obtained directly from the mines, the hydrogen ion saturated forms were also used as carriers for comparisonal study. The saturated ions for the resin were hydrogen, sodium and magnesium. As the physical properties of the tales, colloid content, water adsorption capacity, PH, specific surface, phosphate fixing capacity and exchangeable canons were determined, and these properties were correlated with the amount of the decomposition. Following results were obtained from the experiment. 1. The malathion in the talc in dust was found to decompose around 10-15% ofthe total withina month. About 50% of the decom position that took place after a month was found to occur within a week. 2. The resin which has higher cation exchange capacity than the tales was highly effective in the decomposition of malathion compared with the tales. 3. In every case the saturation of the exchange complexes with hydrogen ion greatly accelerated the decomposition of malathion. 4. The most highly correlated physical properties with the decomposition were colloid content and specific surface of the tales. 5. The water adsorption and phosphate fixing capacities of the tales were found not to correlate with the amount of malathion decomposed. From the experimental results it was concluded that the active negative spots on the colloidal tales or the resin attract the electropositive phosphorus atom in a malathion molecule thereby inducing the decomposition easier. The presence of hydrogen ion nearby might cause a catalytic effect in the decomposition of malathion.