• 청정기술
• /
• 제21권2호
• /
• pp.130-139
• /
• 2015

본 연구에서는 배가스 내 존재하는 비교적 처리가 어려운 오염물질인 NO 기체에 대하여 처리효율을 증대시키기 위하여 NO 산화공정이 필요하며, 이에 필요한 건식산화제를 제조하는 방법으로 H₂O₂ 촉매분해가 도입되었다. H₂O₂ 분해공정 상에서 적용 가능한 촉매로서 다양한 Mn 기반의 불균일계 고체 산 촉매들이 제조되었으며, 이들이 지니는 물리화학적 특성이 주로 H₂O₂ 분해반응에 미치는 영향이 조사되었다. 그 결과, Mn 기반의 고체산 촉매들이 지니는 산점 특성이 H₂O₂ 촉매분해에 영향을 미침을 알 수 있었으며, 산점이 낮은 온도영역에서 많은 양의 산점의 특성을 지니는 촉매가 H₂O₂ 분해반응에서 가장 높은 성능을 나타냄과 동시에 제조된 건식산화제로 인해 높은 NO 산화율을 나타내었다. 대표적인 결과로서 K 성분이 첨가된 Mn 기반의 Fe₂O₃ 지지체 촉매가 적용될 경우, 가장 높은 H₂O₂ 분해효율과 더불어 가장 높은 NO 전환율을 나타내었다.

• 한국광물학회지
• /
• 제28권1호
• /
• pp.29-38
• /
• 2015

광석에서 순도 높은 금은을 추출하기 위해 사용된 청화법으로부터 시안이 유출되어 광석 내 존재하는 중금속들과 결합하여 다양한 형태의 시안화합물이 생성된다. 이러한 시안화합물은 난분해성 오염물질로서 인간을 포함한 생태계에 악영향을 끼친다. 결합력에 따라서 중금속과 결합한 시안화합물은 공유결합성 화합물(weak acid dissociable, WAD)과 착화합물(strong acid dissociable, SAD) 등으로 분류할 수 있다. 본 연구에서는 시안화합물의 존재 형태별 광촉매 산화 효율을 비교 평가하였다. 특히 자외선 LED 광원의 파장과 광촉매 표면 개질이 시안화합물의 분해에 미치는 영향을 살펴보았다. 실험 결과, 동일한 광촉매 산화 조건에서 자유 시안보다는 중금속과 결합한 시안화합물의 광산화 분해 효율이 떨어짐을 알 수 있었다. 그리고 자유 시안의 경우에는 짧은 파장에서 광촉매 산화가 효과적이었지만 중금속과 결합한 시안화합물의 경우에는 긴 파장에서 광산화 분해능이 더 높게 나타났다. 그리고 광촉매 표면 개질에 의하여 광촉매 산화 공정의 성능을 향상시킬 수 있음을 확인하였다.

• Environmental Engineering Research
• /
• 제12권1호
• /
• pp.30-35
• /
• 2007

Fenton system using homogeneous iron catalyst is very powerful in the degradation of organic compounds, but has a disadvantage to remove Fe ions from water after wastewater treatment. Thus, iron catalyst was bounded to support such as inorganic and polymer materials. The PVP supporting iron catalyst showed a good catalytic performance in degradation of phenol contained in waste water and iron catalyst supported on ${SO_4}^{2-}$ type PVP (KEX 511) showed the best catalytic performance. Also, reaction kinetic study was carried out in this system. Reaction constants on various catalysts was obtained from the pseudo first order equation. Reaction rate constants with the heterogenized $FeCl_2/PVP$ catalyst is a three-fold smaller than that of $FeCl_2$ catalyst.

• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1305-1311
• /
• 2014

The nickel oxide, the most widely used cathode material for the molten carbonate fuel cell (MCFC), has several disadvantages including NiO dissolution, poor mechanical strength, and corrosion phenomena during MCFC operation. The surface modification of NiO with lanthanum maintains the advantages, such as performance and stability, and suppresses the disadvantages of NiO cathode because the modification results in the formation of $LaNiO_3$ phase which has high conductivity, stability, and catalytic activity. As a result, La-modified NiO cathode shows low NiO dissolution, high degree of lithiation, and mechanical strength, and high cell performance and catalytic activity in comparison with the pristine NiO. These enhanced physico-chemical and electrochemical properties and the durability in marine environment allow MCFC to marine application as a auxiliary propulsion system.

• 대한기계학회논문집B
• /
• 제30권12호
• /
• pp.1196-1202
• /
• 2006

A MEMS methanol reformer was fabricated and its performance was evaluated in the present study. Catalytic steam reforming of methanol was selected because the process had been widely applied in macro scale reformers. Conventional Cu/ZnO catalyst that was prepared by co-precipitation method to give the highest coating quality was used. The reactor structure was made by bonding three layers of glass wafers. The internal structure of the wafer was fabricated by the wet-etching process that resulted in a high aspect ratio. The internal surface of the reactor was coated by catalyst and individual wafers were fusion-bonded to form the reactor structure. The internal volume of the microfabricated reactor was $0.3cm^3$ and the reactor produced exhaust gas with hydrogen concentration at 73%. The production rate of hydrogen was 4.16 ml/hr that could generate power of 350 mW in a typical PEM fuel cell.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.176.1-176.1
• /
• 2014

Graphene has attracted an increasing attention due to its extraordinary electronic, mechanical, and thermal properties. Especially, the two dimensional (2D) sheet of graphene with an extremely high surface to volume ratio has a great potential in the preparation of multifunctional nanomaterials, as 2D supports to host metal nanoparticles (NPs). Copper oxide is widely used in various areas as antifouling paint, p-type semiconductor, dry cell batteries, and catalysts. Although the copper oxide(II) has been well known for efficient catalyst in C-N cross-coupling reaction, copper oxide(I) has not been highlighted. In this research, CuO and Cu2O nanoparticles (NPs) dispersed on the surface of grapehene oxide (GO) have been synthesized by impregnation method and their morphological and electronic structures have been systemically investigated using TEM, XRD, and XAFS. We demonstrate that both CuO and Cu2O on graphene presents efficient catalytic performance toward C-N cross coupling reaction. The detailed structural difference between CuO and Cu2O NPs and their effect on catalytic performance are discussed.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2011년도 춘계학술논문집 1부
• /
• pp.144-146
• /
• 2011

Al-MCM-48 molecular sieves (Si/Al = 25, 50, 75 and 100) were synthesized hydrothermally using cetyltrimethyl ammonium bromide as the structure directing template. The orderly arrangement of mesopores was evident from the low angle X-ray diffraction patterns and TEM images. The catalytic performance was evaluated in the vapour phase isopropylation of phenol with isopropyl acetate. Phenol conversion decreased with increase in the Si/Al ratio of the catalysts. The major reaction product was 4-isopropyl phenol (selectivity: 78%). Delocalization of phenolic oxygen electron pair over the aromatic ring promoted para-selective alkylation. Such delocalization could be aided by the hydrophilic surface of the molecular sieves. Though ester was used as the alkylating agent, phenyl isopropyl ether was not formed

• Journal of Korean Society for Atmospheric Environment
• /
• 제15권E호
• /
• pp.9-16
• /
• 1999

This study has been focused on NO conversion for metal-incorporated silicates(Fe-silicate, Mn-silicate, and Fe-Mn-bimetallosilicate) with a similar MFI type. Used metallosilicates were prepared by the rapid crystallization method. Their catalytic performance for the conversion of NO under excess O2(10%) condition with the addition of hydrocarbon of low concentration(1,100ppm n-C8H18) were investigated. As a result, the NO conversion on the Fe-Mn-bimetallosilicate was enhanced compared with on the Fe- or Mn-silicates. Furthermore, the performances for NO concentration on Fe-Mn-bimetallosilicate more increased with an increased in n-C8H18 concentration, a decrease in NO concentration, and an increase in O2 concentration.

• Environmental Engineering Research
• /
• 제9권5호
• /
• pp.193-200
• /
• 2004

A study of the treatment of piggery wastes using a multilayered metal-activated carbon system followed by carbon bed filtration was carried out at bench scale. From the physicochemical properties obtained from samples treated with aqueous solutions containing metallic ions such as Ag$^+$, Cu$^{2+}$, Na$^{-}$, K$^+$ and Mn$^{2+}$, main inspections are subjected to isothem shape, pore distribution with micropore, SEM and EDX. Multilayered metal-activated carbons were contacted to waste water to inwestigate the simultaneous catalytic effect for the COD, BOD, T-N and T-P removal. From these removal performance was achieved. The high efficiency of the multilayered metal-activated carbon bed, satisfactory removal performance was achieved. The high efficiency of the multilayered metal-activated carbon bed was derermined by the properties of this material for trapping, catalytic effect and adsorption of organic solid particles.

• 한국산업융합학회 논문집
• /
• 제21권6호
• /
• pp.355-360
• /
• 2018

The product developed in this study is a ceramic catalyst filter for 1 ton heavy-oil boiler that can simultaneously process dust and nitrogen oxides. This has been developed for simultaneous processing of nitrogen oxides and dust at high efficiency of hot exhaust gas (approximately $300^{\circ}C$) generated after burning 1 ton heavy oil boiler. Ceramic catalytic filters for 1 tonne heavy-duty glass display are technologies that remove 90% of dust and 85% or more of nitrogen oxides. This is an improved new technology to integrate exhaust ventilation and desiccation devices into one, thereby reducing the production process and improving the economy. To this end, the performance test of the catalytic filter for heavy oil boilers was carried out, and the durability of the PLC circuit was constructed.