• 자원리싸이클링
• /
• 제16권2호
• /
• pp.48-55
• /
• 2007

석탄화력발전소에서 부산물로 발생하는 비산재를 이용하여 저밀도 폴리에틸렌 열분해용 저가 크래킹 촉매를 합성하였다. 석탄비산재에 포함되어 있는 실리카와 알루미나를 NaOH와의 융합을 통해 용출시키고 이를 공침시킴으로써 비정질 실리카알루미나 촉매로 합성하였다. NaOH/석탄비산재 중량비와 활성화 시간 등의 합성조건이 촉매 합성에 미치는 영향을 살펴보기 위하여 열중량분석기를 사용하여 저밀도 폴리에틸렌 촉매 열분해를 수행하였다. 열분해 온도 변화와 열분해 생성물의 비점분포를 분석하여 합성 촉매의 성능을 평가하였으며 합성된 촉매의 물리적 특성과 촉매 활성간의 관계를 고찰하였다. NaOH/석탄비산재의 중량비가 1.2이고 활성화 시간이 8시간일 때 합성된 촉매가 가장 우수한 성능을 나타내었다. 최적 조건에서 합성된 촉매는 상용촉매와 유사한 활성을 나타내어 우수한 효과를 나타내었으며 폐플라스틱 재활용에 효과적으로 사용할 수 있으리라 예측된다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제15권E호
• /
• pp.1-8
• /
• 1999

Catalytic performance for NOx removal by Ga-incorporated silicates(Ga-silicate; Gallosilicate) with MFI type synthesized by the rapid crystallization method was reported in this study. NOx removal was investigated under the condition of O2 excess(10%), with various hydrocarbons of low concentrations. Effect of H2O(2%) addition was also considered. The result showd that the conversion from NOx to N2 was enhanced on the Ga-silicate compared with the Al-silicate. Furthermore, the performance for NOx conversion on the Ga-silicate increased with addition of water.

• 대한화학회지
• /
• 제68권2호
• /
• pp.87-92
• /
• 2024

The commercialization of rechargeable metal-air batteries is extremely desirable but designing stable oxygen reduction reaction (ORR) catalysts with non-noble metal still has faced challenges to replace platinum-based catalysts. The nonnoble metal catalysts for ORR were prepared to improve the catalytic performance and stability by the thermal decomposition of ZIF-8 with optimum cobalt loading. The porous carbon was obtained by the calcination of ZIF-8 and different loading amounts of Co nanoparticles were anchored onto porous carbon forming a Co/PC catalyst. Co/PC composite shows a significant increase in the ORR value of current and stability (500 h) due to the good electronic conductive PCN support and optimum cobalt metal loading. The significantly improved catalytic performance is ascribed to the chemical structure, synergistic effects, porous carbon networks, and rich active sites. This method develops a new pathway for a highly active and advantageous catalyst for electrochemical devices.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2002년도 춘계 학술발표회 논문집
• /
• pp.21-27
• /
• 2002

Catalytic combustor with heat exchangers are often employed in process technology where a compact design is required [1]. The use of fin and tube heat exchanger offers the enhanced surface area for heat exchange. The recent progress and performance of the fin-tube heat exchanger, especially airside, has been reviewed extensively by Wang[2].(Omitted)

• 한국자동차공학회논문집
• /
• 제15권5호
• /
• pp.105-111
• /
• 2007

In this study, we investigated the conversion performance of de-NOx catalyst for lean-burn natural gas engine. As a de-NOx catalyst, NOx storage reduction catalyst was composed of Pt, Pd and Rh with washcoat including Ba and Ni, Ru-ZSM-5. Ni, Ru-ZSM-5, which was regarded as a NOx direct decomposition catalyst, was made up of ion exchanged ZSM-5 by 5wt.% Ni or Ru. The performance of de-NOx catalyst was evaluated by NOx storage capacity and catalytic reduction in air/fuel, $\lambda=1.6$. The catalytic reaction was also observed when the added fuel was supplied to fuel rich atmosphere by fuel spike period of 5 seconds. The NOx conversion of the catalysts with Ni-ZSM-5 or Ru-ZSM-5 was mainly caused by the effect of NOx adsorption of Ba rather than the catalytic reduction of Ni, Ru-ZSM-5. Ni, Ru-ZSM-5 catalysts can not use for the NSR catalyst because they have quick process in thermal deactivation.

• 한국추진공학회지
• /
• 제15권1호
• /
• pp.11-18
• /
• 2011

비슷한 형상을 가진 스위스롤 연소기의 물리적 크기에 대한 시험이 레이놀즈수와 담��러수의 독립적인 효과를 알아보기 위해 진행되었다. 이를 통해서 촉매연소와 비촉매연소의 소염한계 경계가 연소기의 크기 감소에 따라 다른 경향으로 좁아지는 것을 알 수 있었다. 추가적으로 연료의 화학적 성질의 중요성을 판단하기 위해 알칸기와 에테르기를 포함한 동종의 다른 형태 연료를 적용하여 시험을 수행하였다. 이러한 결과들을 통해 연소기의 크기와 연료의 형태에 따른 효과로 소형 연소기의 성능 및 그러한 장치들에 미치는 영향력에 대한 부분들이 논의되었다.

• 한국산업보건학회지
• /
• 제31권1호
• /
• pp.105-110
• /
• 2021

Objectives: The purpose of this study was to develop a new sterilization plasma device that would be proficient at sterilizing and removing pathogenic bacteria and viruses, and applicable to air purification systems. Methods: In order to understand the performance characteristics, the discharge characteristics of a packed bed DBD reactor and the ozone reduction characteristics of an ozone filter installed at the outlet of the reactor were investigated. Results: The novel packed-bed DBD reactor was proposed, and it was confirmed that the plasma discharge was uniformly and stably discharged throughout the entire layer, and sufficient ozone was generated for sterilization. The ozone filter was tested for three methods: adsorption, adsorption-decomposition, and catalytic decomposition. When the filter thickness was 30 mm, the ozone concentrations were 0.03 ppm, 0.01 ppm, and 0.21 ppm, respectively. The adsorption and adsorption-decomposition methods satisfied the EPA standard of less than 0.05ppm, but the catalytic decomposition method did not. Conclusions: It was confirmed that the adsorption-decomposition method has relatively excellent ozone filter performance and can provide the best ozone filter.

• Korean Chemical Engineering Research
• /
• 제44권3호
• /
• pp.323-327
• /
• 2006

이 논문에서는 전 과정 평가 기법을 이용하여 촉매반응에 의한 에탄올 생산공정의 환경적 가치를 평가하고 발효에 의한 에탄올 생산공정과 그 환경성을 비교하였다. 평가의 목적은 두 공정의 환경성 비교를 통하여 보다 환경 친화적인 공정 개발을 위한 방안을 마련하는데 있었다. 두 공정에서 생산되는 에탄올의 소비 및 폐기 과정은 모두 동일하다고 가정하고 원료물질의 획득으로부터 제품의 생산 과정에 대한 전 과정 평가를 실시하였다. 촉매공정에 대한 전 과정 목록분석을 통해 중간 원료인 메탄올의 생산 과정에서 발생하는 이산화탄소가 주요 환경오염인자라는 것을 확인하였다. 두 공정에 대한 영향평가의 결과 비교를 통하여 발효에 의한 에탄올 생산이 촉매반응에 의한 것보다 환경 친화적이라는 것을 확인하였다. 전 과정 평가의 결과를 바탕으로 공정의 환경성 개선을 위한 방안을 제시하였다.

• Bulletin of the Korean Chemical Society
• /
• 제31권2호
• /
• pp.339-343
• /
• 2010

A series of $Ce_1Mg_xZr_{1-x}O_2$ (CMZO) mixed metal oxide with different molar ratio were prepared by simple co-precipitation method. The prepared materials were tested for their catalytic activity performance using Knoevenagel condensation of various aromatic aldehydes with barbituric acid under solvent-free condition in microwave. The best catalytic activity was obtained with CMZO (1:0.6:0.4). The synthesized materials were characterized by using XRD, FT-IR, SEM-EDS techniques.

• 한국자동차공학회논문집
• /
• 제6권5호
• /
• pp.55-65
• /
• 1998

A numerical and experimental study of three-dimensional steady incompressible non-reacting flow inside various dual-monolith catalytic converters has been conducted for achievement of performance improvement, reduction of light-off time and longer service life by improving the flow uniformity within the monolith. In this study, the effects of curvature of inlet exhaust pipe and monolith brick length on the flow uniformity and pressure drop within monolith were numerically investigated. The computations are confirmed by measurements of steady flow. The agreement between computations and experiment was relatively good. The result of this study shows that curvature of inlet exhaust pipe and monolith brick length gave a great effect on the flow uniformity and the shorter the brick length, the lower flow uniformity and the less pressure drop.