• 한국세라믹학회지
• /
• 제45권4호
• /
• pp.232-237
• /
• 2008

As the single chamber SOFC(SC-SOFC) showed higher prospect on reducing the operation temperature as well as offering higher design flexibility of SOFCs, lots of concerns have been given to investigate the catalytic activity of perovskite-type oxide in mixed fuel and oxidant conditions. Hence we thoroughly investigated the catalytic property of various perovskite-type oxides such as $La_{0.8}Sr_{0.2}MnO_3(LSM),\;La_{0.6}Sr_{0.4}CoO_3(LSC),\;La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_3(LSCF),\;Sm_{0.5}Sr_{0.5}CoO_3(SSC),\;and\;Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}(BSCF)$ under the partial oxidation condition of methane which used to be given for SC-SOFC operation. In this study, powder form of each perovskite oxides whose surface areas were controlled to be equal, were investigated as functions of methane to oxygen ratios and reactor temperature. XRD, BET and SEM were employed to characterize the crystalline phase, surface area and microstructure of prepared powders before and after the catalytic oxidation. According to the gas phase analysis with flow-through type reactor and gas chromatography system, LSC, SSC, and LSCF showed higher catalytic activity at fairly lower temperature around $400^{\circ}C{\sim}450^{\circ}C$ whereas LSM and BSCF could be activated at much higher temperature above $600^{\circ}C$.

• Carbon letters
• /
• 제24권
• /
• pp.103-110
• /
• 2017

Carbon-based magnetic nanostructures in several instances have resulted in improved physicochemical and catalytic properties when compared to multi-wall carbon nanotubes (MWCNTs) and magnetic nanoparticles. In this study, magnetic MWCNTs with a structure of $Ni_xZn_xFe_2O_4/MWCNT$ as peroxidase mimics were fabricated by the one-pot hydrothermal method. The structure, composition and morphology of the nanocomposites were characterized with X-ray diffraction (XRD), Fourier transform infrared spectroscopy and transmission electron microscopy. The magnetic properties were investigated with a vibrating sample magnetometer. The peroxidase-like catalytic activity of the nanocomposites was investigated by colorimetric and electrochemical tests with 3,3',5,5'-tetramethylbenzidine (TMB) and $H_2O_2$ as the substrates. The results show that the synthesis of the nanocomposites was successfully performed. XRD analysis confirmed the crystalline structures of the $Ni_xZn_xFe_2O_4/MWCNT$ nanohybrids and MWCNTs. The main peaks of the $Ni_xZn_xFe_2O_4/MWCNT$s crystals were presented. The $Ni_{0.25}Zn_{0.25}Fe_2O_4/MWCNT$ and $Ni_{0.5}Zn_{0.5}Fe_2O_4/MWCNT$ nanocatalysts showed nearly similar physicochemical properties, but the $Ni_{0.5}Zn_{0.5}Fe_2O_4/MWCNT$ nanocatalyst was more appropriate than the $Ni_{0.25}Zn_{0.25}Fe_2O_4/MWCNT$ nanocatalyst in terms of the magnetic properties and catalytic activity. The optimum peroxidase-like activity of the nanocatalysts was obtained at pH 3.0. The $Ni_{0.5}Zn_{0.5}Fe_2O_4/MWCNT$ nanocatalyst exhibited a good peroxidase-like activity. These magnetic nanocatalysts can be suitable candidates for future enzyme-based applications such as the detection of glucose and $H_2O_2$.

• 공업화학
• /
• 제1권1호
• /
• pp.35-43
• /
• 1990

일련의 $TiO_2-SiO_2$촉매를 $TiCl_4$와 $Na_2SiO_3$혼합용액을 공침전시켜 제조하였으며 이중 일부의 촉매는 1N $H_2SO_4$로 처리하여 촉매표면을 개질하였다. 개질된 촉매의 촉매활성은 개질 안된 촉매보다 높은 촉매활성을 나타내었으며 cumene dealkylation 반응에서 보다 2 - propanol dehydration 반응에서 더욱 효과가 크게 나타났다. 개질 안된 촉매의 상기 두 반응에 대한 촉매활성은 산의 양과 관계가 있었다. $TiO_2-SiO_2$촉매는 비교적 많은 양의 약한 산자리와 작은 양의 강한 산자리를 가졌기 때문에 cumene dealkylation 반응에서 보다 2 - propanol dealkylation 반응에 더 높은 촉매활성을 나타내었다. 촉매활성에 미치는 $H_2SO_4$의 개질효과는 $TiO_2$ 함량에 비례하였으며 $92-TiO_2-SiO_2/SO_4^2$가 2 - propanol dealkylation 반응에 가장 큰 촉매활성의 증가를 나타내었다.

• 공업화학
• /
• 제33권3호
• /
• pp.328-334
• /
• 2022

For the study of environmental application of natural zeolites (NZ) and red mud (RM), which are discharged from various industrial fields, the catalytic ozonation of 2-butaone (methyl ethyl ketone, MEK) was performed using the Mn-loaded NZ prepared according to the Mn content of 1, 3, 5, 7, and 10 wt%. By the addition of Mn to NZ, the BET (Brunaure-Emmett-Teller) specific surface area of Mn/NZ catalysts decreased while the ratio of Mn³⁺/[Mn³⁺+Mn⁴⁺] intensively increased. Besides, the addition of Mn component to NZ increased the ratio of adsorbed oxygen (O_adsorbed) toward lattice oxygen (O_lattice), O_adsorbed/O_lattice from 0.076 of NZ to 0.465 of 10 wt% Mn/NZ according to the amount of Mn. It is known that the proportion of two species, Mn³⁺ and O_adsorbed, would greatly affect the catalytic activity. However, the balancing between the paired species, Mn³⁺ vs. Mn⁴⁺ and O_adsorbed vs. O_lattice might be more essential for the catalytic ozonation of MEK at room temperature. Among the Mn-loaded NZ catalysts, the 3 wt% Mn/NZ showed the best activity for the removal of MEK and ozone. The 5, 7, and 10 wt% Mn/NZ catalysts are slightly inferior to the 3 wt% Mn/NZ. Compared to the pristine NZ, the Mn/NZ catalysts showed better activity for the catalytic ozonation of MEK. In addition, the 3 wt% Mn/NZ was confirmed to have the most available acid sites among them by the analysis of NH₃-TPD (temperature programmed desorption). This might be the major reason for the best catalytic activity of 3 wt% Mn/NZ together with the adjusted distribution ratios of Mn³⁺/Mn⁴⁺ and O_adsorbed/O_lattice. Considering the result of 3 wt% Mn/NZ, the 3 wt% Mn/RM was prepared to perform the catalytic activity for the removal of MEK and ozone, but the efficiency of 3 wt% Mn/RM was significantly lower than that of the 3 wt% Mn/NZ.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.363-368
• /
• 2008

Nitrogen oxides (NO, $NO_2$ and $N_2O$) have been controlled effectively by the SCR catalysts coated on monolith or honeycomb in commercial sites with ammonia as reductant at high temperature range $300{\sim}400^{\circ}C$. However, the catalytic filter has much merit on the point of controlling the particles and nitrogen oxides simultaneously. It will be more advanced-system if the catalytic working temperature is reduced to the normal filtration temperature of under $200^{\circ}C$. This study has focus on the development of the catalytic filter working at the low temperature. So the additive effect of the components such as Pt and Mn (which are known the catalytic component of $V_2O_5/TiO_2$ was investigated. The $V_2O_5-WO_3$ catalytic filter exhibited high activity and selectivity at $250{\sim}320^{\circ}C$ showing more than 95% NO conversion for the treatment of 600 ppm NO at face velocity 2 cm/s. The Pt-$V_2O_5-WO_3$ catalytic filter shifted the optimum working temperature towards the lower temperature ($170{\sim}200^{\circ}C$). And NO conversion was 100% and higher than that of $V_2O_5-WO_3$ catalyst at $250{\sim}320^{\circ}C$. The $MnO_X-V_2O_5-WO_3$ catalytic filter showed the wide temperature range of $220{\sim}330^{\circ}C$ for more than 95% NO conversion. This is a remarkable advantage when considered the $MnO_X$ catalytic filter presents the maximum activity at $150{\sim}250^{\circ}C$ and $V_2O_5-WO_3$ catalytic filter shows the maximum activity at $250{\sim}320^{\circ}C$.

• BMB Reports
• /
• 제30권2호
• /
• pp.125-131
• /
• 1997

This work reports studies of the catalytic and structural properties of pyridoxal kinase (ATP: pyridoxal 5' -phosphotransferase, EC. 2.7.1.35), Pyridoxal kinase catalyzes the phosphorylation of vitamin $B_6$ (pyridoxal, pyridoxamine, pyridoxine) using ATP-Zn as a phosphoryl donor. The enzyme purified from brain tissues is made up of two identical subunits of 40 kDa each. Native enzyme was inhibited by a substrate analogue, pyridoxal-oxime. Limited chymotrypsin digestion of pyridoxal kinase yields two fragments of 24 and 16 kDa with concomitant loss of catalytic activity. These fragments were isolated by DEAE ion exchange chromatography and used for binding studies with fluorescent ATP and pyridoxal analogues. The spectroscopic properties of both fluorescent pyridoxal analogue and Anthraniloyl ATP (Ant-ATP) bound to the 24 kDa fragment are indistinguishable from those of both pyridoxal analogue and Ant-ATP bound to the native pyridoxal kinase, respectively. The small 16 kDa fragment, generated by proteolytic cleavage of the kinase, does not bind any of the substrate analogues. Binding characteristics of Ant-ATP were extensively studied by measuring the changes in fluorescence spectra at various conditions. From the results presented herein, it is postulated that the structural domain associated with catalytic activity comprises approximately one-half of the molecular mass of pyridoxal kinase (24 kDa). whereas the remaining portion (16 kDa) of the enzyme contains a regulatory binding domain.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제4권4호
• /
• pp.201-208
• /
• 2000

The reduction of NO by hydrocarbons was investigated over Cu/Al$_2$O$_3$catalysts using a stainless steel flow reactor under highly oxidising diesel exhaust conditions(up to 15%). Three different Cu loadings(1,5 and 10wt.%) on an $Al_2$O$_3$support were prepared and characterized using spectroscopic techniques. The catalytic activity tests show that different Cu loadings as well as temperature, oxygen, and hydrocarbon concentration levels significantly influence the NO reduction. Increasing Cu loadings up to 5 and 10wt.% decreases the catalytic activities for NO reduction due to the formation of a bulk crystalline CuO phase, as observed from XRD and SEM images. In particular, the visualization of the copper dispersion on the surface using the SEM-BEI technique provides information on the extent of copper saturation, particle size, and the effects on NO reduction. However, the lower Cu loading(1 wt.%) increases the catalytic activity with a temperature window of 720-810K, thereby favoring the formation of well dispersed isolated Cu species, e.g. Cu(sup)2+ ions, which is related to selective NO reduction. The effects of other reaction parameters, such as oxygen, the hydrocarbon level and type, and byproduct emissions are further discussed.

• BMB Reports
• /
• 제43권5호
• /
• pp.325-329
• /
• 2010

Protein kinase CKII (CKII), a heterotetramer composed of two catalytic ($\alpha$ or $\alpha$') subunits and two regulatory ($\beta$) subunits, plays a critical role in cell proliferation and anti-apoptosis. Recently, capsaicin was shown to trigger apoptosis. Therefore, we examined the effect of capsaicin on CKII activity. Although capsaicin induced apoptotic death in HeLa cells, CKII activity was increased in the cytosolic fraction of HeLa cells after treatment. Capsaicin did not change the expression of the $CKII{\alpha}$ and $CKII{\beta}$ proteins. Capsaicin stimulated the catalytic activity of recombinant CKII tetramer, but not the $CKII{\alpha}$ subunit. Moreover, capsaicin enhanced the autophosphorylation of $CKII{\alpha}$ and $CKII{\beta}$. Taken together, our data suggest that capsaicin stimulates the phosphotransferase activity of CKII holoenzyme by interacting with the $CKII{\beta}$ subunit.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.246-246
• /
• 2012

Smart catalyst design though novel catalyst preparation methods can improve catalytic activity of transition metals on reducible oxide supports such as titania by enhancement of metal oxide interface effects. In this work, we investigated Pt nanoparticles/titania catalysts under CO oxidation reaction by using novel preparation methods in order to enhance its catalytic activity by optimizing metal oxide interface. Arc plasma deposition (APD) and metal impregnation techniques are employed to achieve Pt metal deposition on titania supports which are prepared by multi-target sputtering and Sol-gel techniques. In order to tailor metal-support interface for catalytic CO oxidation reaction, Pt nanoparticles and thin films are deposited in varying surface coverages on sputtered titania films using APD. To assess the role of oxide support at the interface, APD-Pt is deposited on sputtered and Sol-gel prepared titania films. Lastly, characteristics of APD-Pt process are compared with Pt impregnation technique. Our results show that activity of Pt nanoparticles is improved when supported over Sol-Gel prepared titania than sputtered titania film. It is suggested that this enhanced activity can be partly ascribed to a very rough titania surface with the higher free metal surface area and higher number of sites at the interface between the metal and the support. Also, APD-Pt shows superior catalytic activity under CO oxidation as compared to Pt impregnation on sputtered titania support. XPS results show that bulk oxide is formed on Pt when deposited through impregnation and has higher proportion of oxidized Pt in the form of $Pt^{2+/4+}$ oxidation states than Pt metal. APD-Pt shows, however, mild oxidation with large proportion of active Pt metal. APD-Pt also shows trend of increasing CO oxidation activity with number of shots. The activity continues to increase with surface coverage beyond 100%, thus suggesting a very rough and porous Pt films with higher active surface metal sites due to an increased surface area available for the reactant CO and $O_2$ molecules. The results suggest a novel approach for systematic investigation into metal oxide interface by rational catalysts design which can be extended to other metal-support systems in the future.

• Bulletin of the Korean Chemical Society
• /
• 제16권11호
• /
• pp.1093-1099
• /
• 1995

The polycondensations of bis(2-hydroxyethyl) naphthalate were kinetically investigated in the presence of various metallic compounds as catalysts at 295 ℃. The effect of the catalyst nature in the polycondensation has been studied. The order of catalytic activity on the formation of poly(ethylene 2,6-naphthalate) was found to be related to the stability constants which are indicated in an index of the catalytic activity.