• 콘크리트학회논문집
• /
• 제23권2호
• /
• pp.235-244
• /
• 2011

세그멘탈 교량의 파괴는 부적절한 접합에 의해 파괴를 일으키게 되는데 이는 세그멘탈 접합부를 가로지르는 횡방향 텐던의 부식을 야기하게 된다. 이 연구에서는 현장 타설 접합 및 에폭시 접합 조건에 따른 초고성능 프리캐스트 콘크리트 접합부에서의 전단키 거동을 전단 및 극한거동 측면에서 평가하였다. 또한, PC 세그멘탈 교량 접합부의 전단 거동을 파악하기 위하여 전단키 접합부의 전단 거동과 전단강도 특성을 실험적으로 연구하였다. 이 연구를 통하여 접합부 형상에 따른 하중-변위 관계, 균열 거동, 파괴 모드, 전단 강도 등을 구명하고, 접합부의 역학적 거동에 영향을 미치는 여러 인자들에 대해 분석한다. 또한 이로부터 최적의 접합부 형상을 도출하고, 이에 따른 최적의 접합 방식을 검토함으로서 접합부 설계의 지침과 해석의 근거를 제시하도록 한다.

• Advances in materials Research
• /
• 제7권1호
• /
• pp.45-72
• /
• 2018

In the present study, a special attention has been paid to the effects regarding the use of different superplasticizers in different dosages. To do so, 36 mixes of normal and self-compacting concrete with two water/binder ratios of 0.35 and 0.45, four different types of superplasticizer including melamine-formaldehyde, naphthalene-formaldehyde, carboxylic-ether and poly-carboxylate, four different superplasticizer/cement ratios of 0.4%, 0.8%, 1.2% and 1.6% and two silica fume/cement ratios of 0% and 10% have been cast. Moreover, the initial and final setting time of the pastes have been tested. For self-compacting mixes, flow time, slump flow, V-funnel, J-ring and L-box tests have been carried out as well as testing the compressive strength and rupture modulus. For normal concrete mixes,slump test has been conducted to assess the workability of the mix and then for each mix, the compressive strength and rupture modulus have been determined. The results indicate that in addition to the important role of superplasticizer type and dosage on fresh state properties of concrete, these parameters as well as the use of silica fume could affect the hardened state properties of the mixes. For instance, the mixes whose superplasticizer were poly-carboxylic-ether based showed better compressive and tensile strength than other mixes. Besides, the air contents showed robust dependency to the type of the superplasticizer. However, the use of silica fume decreased the air contents of the mixes.

• Smart Structures and Systems
• /
• 제29권2호
• /
• pp.267-278
• /
• 2022

Pre-stressed concrete circular spun piles are widely used in various infrastructure projects around the world and offer an economical deep foundation system with consistent and superior quality compared to cast in-situ and other concrete piles. Conventional methods for measuring the lateral response of piles have been limited to conventional instrumentation, such as electrical based gauges and pressure transducers. The problem with existing technology is that the sensors are not able to assist in recording the lateral stiffness changes of the pile which varies along the length depending on the distribution of the flexural moments and appearance of tensile cracks. This paper describes a full-scale bending test of a 1-m diameter spun pile of 30 m long and instrumented using advanced fibre optic distributed sensor, known as Brillouin Optical Time Domain Analysis (BOTDA). Optical fibre sensors were embedded inside the concrete during the manufacturing stage and attached on the concrete surface in order to measure the pile's full-length flexural behaviour under the prescribed serviceability and ultimate limit state. The relationship between moments-deflections and bending moments-curvatures are examined with respect to the lateral forces. Tensile cracks were measured and compared with the peak strains observed from BOTDA data which corroborated very well. By analysing the moment-curvature response of the pile, the structure can be represented by two bending stiffness parameters, namely the pre-yield (EI) and post-yield (EI_cr), where the cracks reduce the stiffness property by 89%. The pile deflection profile can be attained from optical fibre data through closed-form solutions, which generally matched with the displacements recorded by Linear Voltage Displacement Transducers (LVDTs).

• Structural Monitoring and Maintenance
• /
• 제10권1호
• /
• pp.1-23
• /
• 2023

Various efforts have been made to reduce the weight of concrete slabs while preserving their flexural strength. This will result in reducing deflection and allows the utilization of longer spans. The top zone of the slab requires concrete to create the compression block for flexural strength, and the tension zone needs concrete to join with reinforcing for flexural strength. Also, the top and bottom slab faces must be linked to transmit stresses. Voided slab systems were and are still used to make long-span slab buildings lighter. Eight slab specimens of (1000^*1000 (1000^*1000 mm²) were cast and tested as two-way simply supported slabs in this research. The tested specimens consist of one solid slab and seven voided slabs with the following variables (type of slab solid and voided), thickness of slab (100 and 125 mm), presence of steel fibers (0% and 1%), and the number of GFRP layers). The voids in slabs were made using high-density polystyrene of dimensions (200^*200^*50 mm) with a central hole of dimensions (50^*50^*50 mm) at the ineffective concrete zones to give a reduction in weight by (34% to 38%). The slabs were tested as simply supported slabs under partial uniform loading. The results of specimens subjected to monotonic loading show that the combined strengthening by steel fibers and GFRP sheets of the concrete specimen (V-125-2GF-1%) shows the least deflection, deflection (4.6 mm), good ultimate loading capacity (192 MPa), large stiffness at cracking and at ultimate (57 and 41.74) respectively, more ductility (1.44), and high energy absorption (1344.83 kN.mm); so it's the best specimen that can be used as a voided slab under this type of loading.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권5호
• /
• pp.129-138
• /
• 2006

철근 선조립형 복합 데크플레이트는 거푸집 작업을 없앨 수 있기 때문에 건설현장에서의 발전을 가져왔다. 복합데크 시스템의 해석에는 2D해석법과 3D해석법이 있다. 지금까지 2D해석법을 사용하였으나, 선경축소에 따른 비렌딜 거동을 보다 정확히 표현할 수 있는 3D 해석법의 사용이 요구되어진다. 본 연구에서는 하부근의 선경축소, 아연도 강판의 유무, 경간, 슬래브 두께 등을 변수로 8개의 실험체를 제작하여 거동을 파악하였고, 2D해석법 및 3D해석법을 사용하여 결과를 비교 분석하였다. 2D해석법은 D10의 하부근을 사용하는 경우에만 적용하는 것이 타당하고, 비렌딜 거동을 포함한 상세한 거동을 표현하기 위해서는 3D해석법을 사용하는 것이 타당하다.

• 자원리싸이클링
• /
• 제29권1호
• /
• pp.53-61
• /
• 2020

본 연구는 시멘트 대비 산업부산물을 90% 이상 대체한 친환경 결합재를 이용하여 저강도·고유동을 갖는 지반보수용 기포콘크리트 소재를 개발하기 위한 연구로서, 산업부산물을 다량 활용시 발생하는 기포콘크리트의 초기 침하율 및 체적변화를 개선하기 위하여 CSA(Calcium sulfo aluminate)를 소량 대체하여 기초특성을 평가하였다. 기포콘크리트용 친환경 결합재 대비 CSA의 대체율은 2.5, 5, 10%로, 굳지않은 특성, 경화특성, 공극구조 및 수화물을 분석하였다. 실험결과 친환경 결합재 사용시의 높은 침하깊이를 CSA 2.5% 사용만으로도 개선할 수 있었으며, 그로인해 경화 후에도 타설된 시험체의 상중하의 중량편차도 개선되었다. CSA 첨가에 따라 공극구조도 작고 균일한 사이즈의 독립기포 형성에 기여하였으며, 초기강도는 개선되었다. 그러나 CSA의 혼입률의 증가에 따라 장기강도는 감소하였으나, 5% 이하를 사용할 경우 목표강도를 만족하였다. 이로써 산업부산물을 다량 활용한 친환경 결합재에 CSA의 2.5% 첨가만으로도 목표성능의 저강도 고유동을 갖는 지반 보수용 기포콘크리트 제조가 가능한 것을 확인하였다.

• 한국철도학회논문집
• /
• 제12권1호
• /
• pp.55-64
• /
• 2009

콘크리트궤도는 유지보수상의 장점으로 인하여 자갈궤도를 급속히 대체하고 있다. 반면에 보수보강이 어렵기 때문에 매우 엄격한 설계와 시공기술이 필요하며 이러한 기술을 만족하기 위해서는 평가기술 또한 뒷받침이 되어야 한다. 본 논문에서는 이와 같이 시공 및 유지보수의 핀 평가기술을 확보하기 위한 방안으로서 탄성파를 이용하는 비파괴조사기법을 다양하게 적용하였다. 사용된 기법은 SASW시험, 임팩트에코시험, 연속임팩트에코시험이다. 시험은 49개의 프리캐스트 판넬의 강성구조와 충진성능을 평가하는 목적으로 총 5,353회에 걸쳐 수행되었다. 적용 결과, 콘크리트재료 자체의 비균질성으로 인하여 탄성파시험의 적용 및 분석이 제한적이지만 본 논문에서 목적하는 슬래브의 강성구조과 충전성(공극)에 대한 신뢰성 있는 조사 결과를 얻을 수 있을 것으로 나타났다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권3호
• /
• pp.130-138
• /
• 2015

본 연구에서는 고유동 고강도 콘크리트의 현장타설에의 적용성 검토를 위해 거푸집의 측압검토를 수행하였다. 이를 위해 타설높이 및 타설속도를 주요변수로 정하여 실험체를 제작한 후, 수행한 실험으로부터 측압 및 온도변화를 측정하였다. 고유동 고강도 콘크리트의 최대 측압은 굳지 않은 콘크리트의 측압으로 나타났으며, 타설 직후 측압이 감소하기 시작하여 12시간 이후 안정화를 보였다. 3~4시간 이후 안정화가 나타나는 보통 콘크리트와 측압이 감소하는 경향은 유사하다. 타설속도가 빠를수록 최대 측압이 크게 발생하였으며, 시간의 경과에 따른 감소량은 거의 유사하였다. 또한 수화열과 측압감소 사이에 직접적인 연관성은 나타나지 않았다.

• Steel and Composite Structures
• /
• 제19권6호
• /
• pp.1403-1419
• /
• 2015

When precast concrete infill panels are connected to steel frames at discrete locations, interaction at the structural interface is neither complete nor absent. The contribution of precast concrete infill panels to the lateral stiffness and strength of steel frames can be significant depending on the quality, quantity and location of the discrete interface connections. This paper presents preliminary experimental and finite element results of an investigation into the composite behaviour of a square steel frame with a precast concrete infill panel subject to lateral loading. The panel is connected at the corners to the ends of the top and bottom beams. The Frame-to-Panel-Connection, FPC4 between steel beam and concrete panel consists of two parts. A T-section with five achor bars welded to the top of the flange is cast in at the panel corner at a forty five degree angle. The triangularly shaped web of the T-section is reinforced against local buckling with a stiffener plate. The second part consists of a triangular gusset plate which is welded to the beam flange. Two bolts acting in shear connect the gusset plate to the web of the T-section. This way the connection can act in tension or compression. Experimental pull-out tests on individual connections allowed their load deflection characteristics to be established. A full scale experiment was performed on a one-storey one-bay 3 by 3 m infilled frame structure which was horizontally loaded at the top. With the characteristics of the frame-to-panel connections obtained from the experiments on individual connections, finite element analyses were performed on the infilled frame structures taking geometric and material non-linear behaviour of the structural components into account. The finite element model yields reasonably accurate results. This allows the model to be used for further parametric studies.

• Steel and Composite Structures
• /
• 제46권6호
• /
• pp.793-804
• /
• 2023

In this study, cyclic loading tests were conducted to assess the seismic performance of cast-in-place (CIP) concrete-filled hollow core precast concrete columns (HPCC) constructed using steel ducts and rubber tubes. The outer shells of HPCC, with a hollow ratio of 47%, were fabricated using steel ducts and rubber tubes, respectively. Two combinations of shear studs & long threaded bars or cross-deformed bars & V-ties were employed to ensure the structural integrity of the old concrete (outer shell) and new CIP concrete. Up to a drift ratio of 3.8%, the hysteresis loop, yielding stiffness, dissipated energy, and equivalent damping ratio of the HPCC specimens were largely comparable to those of the solid columns. Besides the similarities in cyclic load-displacement responses, the strain history of the longitudinal bars and the transverse confinement of the three specimens also exhibited similar patterns. The measured maximum moment exceeded the predicted moment according to ACI 318 by more than 1.03 times. However, the load reduction of the HPCC specimen after reaching peak strength was marginally greater than that of the solid specimen. The energy dissipation and equivalent damping ratios of the HPCC specimens were 20% and 25% lower than those of the solid specimen, respectively. Taking into account the overall results, the structural behavior of HPCC specimens fabricated using steel ducts and rubber tubes is deemed comparable to that of solid columns. Furthermore, it was confirmed that the two combinations for securing structural integrity functioned as expected, and that rubber air-tubes can be effectively used to create well-shaped hollow sections.